• September 26, 2017, 02:17:22 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: WoL - Setting Broadcast ip(*.*.*.255) in virtual server  (Read 131 times)

leithianz

  • Level 1 Member
  • *
  • Posts: 1
WoL - Setting Broadcast ip(*.*.*.255) in virtual server
« on: September 12, 2017, 07:26:43 AM »

Hi all.
I've searched and searched this topic for full 12-hours and still have no solution at all.

My wol setting works very well. It works good within same network(that is, under same router).
But when it goes in to internet, it works for a brief moment.

That is why we should send magic packet to broadcast ip right? Becuase pc's ip only holds brief moment in ram after power is turnned off.
So when signaled, router must use broadcast ip to send magic packet to all pc's under the router.


But the problem is, my setting won't let me set the ip for wake-on-lan in virtual server.
If setted to 192.168.0.255 it gives me an alert saying "Host IP you typed is out of range" something similar to that. (sorry it's Korean)

I've already tried http://forums.dlink.com/index.php?topic=16404.15 but was no good.

Is there anyone successfully managed WoL function with 850L?

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43140
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: WoL - Setting Broadcast ip(*.*.*.255) in virtual server
« Reply #1 on: September 19, 2017, 08:59:04 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

Is there any WoL presets in the Advanced Port Forwarding, Triggering or Virtual Server menus? Tried Virtual Server configurations?

Some D-Link home routers don't support the broadcast IP addresss thus not supporting of WoL.
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting