• September 20, 2017, 01:10:52 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: SD card recording interval & Mass download  (Read 114 times)

arrowgr

  • Level 1 Member
  • *
  • Posts: 1
SD card recording interval & Mass download
« on: July 21, 2017, 10:38:48 AM »

Hello! I'm a new user of a DCS-936L. I have gotten most of the way through setup and configuration, but the way that the SD card storage interface is set up has been causing me a lot of trouble. There are two things I need help with to get my system working properly.

1) How can I set the camera to only record images/video to the SD card on certain intervals? My camera is recording an image every second, but I only need or want an image once per minute or once every five minutes.

2) How can I download the images from the card without clicking through them with the web interface? The camera is difficult to access, so physically pulling out the sd card is not a good option. Since the camera is literally taking thousands of images every day, clicking each one is not an option either.  I could use a browser extension or script to download images by url, but I get 403-forbidden errors when i try to I paste in the link url (http://LOCALIP/cgi/admin/getSDFile.cgi?file=DATE_TIME.jpg&path=DCS-936L/DATE/HOUR/DATE_TIME.jpg) to the browser rather than clicking on it.

I have also tried both the python script and greasemonkey extension with no luck.

Thank you!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43114
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: SD card recording interval & Mass download
« Reply #1 on: July 21, 2017, 10:56:07 AM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

Look like this camera doesn't support what your asking. Has a limited selection of features that are set up for timing and capture. I see motion and sound detection settings are this:
Pre-event recording :   5 seconds  (Between 0 to 5 seconds)
Post-event recording :   5 seconds  (Between 0 to 60 seconds)

I'll see if I can get some help on getting files from the SD card. Not sure what is supported though.  ::)
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting