• March 18, 2024, 11:25:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Humming Noise from DCS-6020  (Read 13758 times)

m.j.alexander

  • Level 1 Member
  • *
  • Posts: 1
Humming Noise from DCS-6020
« on: July 05, 2017, 09:08:16 AM »

This problem affects many users and today I found the  cause.
I dismantled my DCS-6020L; take the rubber feet off and undo the screws etc. etc.
The problem is the microphone is open circuit.
Looking at the wires, during manufacture they have been crimped hard at both ends.
I assume that one of the wires finally broke!

Removing the microphone, cable and plug - the unit is totally quiet.
So the hum is not coming from the amplifier; it comes from the microphone/cable/plug assembly.
If D-Link provided this assembly as a spare part (probably costing a couple of dollars) camera s with this problem could be fixed.
Also, if they told their supplier about excessively crimping the wires, it would also fix the problem in future.

Any idead D-Link?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Humming Noise from DCS-6020
« Reply #1 on: July 05, 2017, 09:24:45 AM »

Link>Welcome!

  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

Possible that the mic is defective and the main cause. This unit would have to be RMAd and sent back for replacement. This is not a user replaceable item.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.