• November 21, 2017, 03:37:48 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: How to setup Motion Triggered Recording?  (Read 880 times)

Austintatious

  • Level 1 Member
  • *
  • Posts: 2
How to setup Motion Triggered Recording?
« on: January 21, 2017, 07:16:10 PM »

I've setup a DNR-202L (F/W ver2.04.03 HW A2) and four 930L cameras. Everything is working fine but I am not able to set it up to record on motion.

Motion detection is enabled for all of the cameras, and an email is successfully sent whenever motion is detected on any of the cameras. I've got Manual Record turned off and there is no recording schedule enabled. I don't see an option anywhere to record on a motion trigger.

How do I setup motion triggered recording?
« Last Edit: January 21, 2017, 07:18:07 PM by Austintatious »
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2080
Re: How to setup Motion Triggered Recording?
« Reply #1 on: January 21, 2017, 09:29:29 PM »

I've setup a DNR-202L (F/W ver2.04.03 HW A2) and four 930L cameras. Everything is working fine but I am not able to set it up to record on motion.

Motion detection is enabled for all of the cameras, and an email is successfully sent whenever motion is detected on any of the cameras. I've got Manual Record turned off and there is no recording schedule enabled. I don't see an option anywhere to record on a motion trigger.

How do I setup motion triggered recording?

Under Setup (Gears icon)
Schedule-Recording Schedule->  click the green "RECORD ON EVENT", click ALWAYS (or else put in the times to record on event).

I'm recording 4 cameras 24x7, and when the cameras set off motion detection, I'm noticing about a  15 second delay  before the DNR202L picks it up.

Let us know if this works or not. 
Logged

Austintatious

  • Level 1 Member
  • *
  • Posts: 2
Re: How to setup Motion Triggered Recording?
« Reply #2 on: January 21, 2017, 10:07:25 PM »

Ah! Found it - thanks. I set all four to record on motion trigger with a 5 second pre and 10 second post delay. Seems to be working fine.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: How to setup Motion Triggered Recording? (RESOLVED)
« Reply #3 on: January 23, 2017, 07:29:25 AM »

Link>Welcome!

Glad you were able to get it working.

Enjoy.  ;)
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

edgerunner

  • Level 1 Member
  • *
  • Posts: 3
Re: How to setup Motion Triggered Recording?
« Reply #4 on: June 29, 2017, 06:54:39 AM »

I went to the DNR-202L website, clicked Camera->Audio and Video, on the right bottom in the Motion tab I clicked check box "Enagle Video Motion".
What is this option? Is it motion detection?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43656
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: How to setup Motion Triggered Recording?
« Reply #5 on: June 29, 2017, 08:12:19 AM »

Yes.

I went to the DNR-202L website, clicked Camera->Audio and Video, on the right bottom in the Motion tab I clicked check box "Enagle Video Motion".
What is this option? Is it motion detection?
Logged
Cable:100mb/3Mb>Motorola SB6183>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting