• December 18, 2017, 08:47:05 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations  (Read 6016 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology

D-Link posted DCS-942L Rev A firmware version v1.27 which can be downloaded here: http://support.dlink.com/ProductInfo.aspx?m=DCS-942L

Problems Fixed
1. Fix the unsuitable response issue for API /cgi/admin/adv_do.cgi. (Display 404 not found)
2. Fix the CSRF vulnerability.
3. Fix the ONVIF vulnerability for not well-formed request.
4. Fix below Onward security issues:
 OnSec-VUZ-103-48001, TLS/SSL Server Supports Weak Cipher
Algorithms.
 OnSec-VUZ-103-48002, OpenSSL CCS Injection.
5. Fix issue low sensitivity for motion detection.

New Features
1. Support 3DES encryption in WinXP + IE8, and remove RC4 encryption.
2. Support TLS, v1.1 & v1.2.
3. Add the notification message for Chrome 45 and above.
4. Add the notification message for Win10/Edge.
5. To fix the CSRF vulnerability, there is a spec change issue. The HTTP Authentication Realm will change as “Product_Name_xx”, where xx is 2 digit suffix of MAC address.
6. Upgrade ActiveX/NCSPlugin for windows to v1.0.0.10413
7. Upgrade mydlink agent to v2.0.20-b09 to fix the notification issue.
8. Refine the CSRF fix to exclude NIPCA CGIs.
9. Modify 403 error message for CSRF protection.
10. Enable CSRF Protection by default.
11. Upgrade open source OpenSSL to v1.0.2d.
12. Change the copyright and default system time for year 2015.
13. Remove redundant message from NIPCA API /config/wlansignal.cgi.

Please post your comments and observations as a reply to this thread.

 :)  ;)  :)
« Last Edit: August 10, 2016, 06:52:43 AM by FurryNutz »
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

banchang

  • Level 1 Member
  • *
  • Posts: 2
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #1 on: August 10, 2016, 03:15:59 AM »

Is this for DCS 930L or DCS 942L ?

According to the Support site the latest firmware for DCS-942L is 1.26 ?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #2 on: August 10, 2016, 06:53:14 AM »

Sorry for the typo, this update is for the DCS-942L.

Is this for DCS 930L or DCS 942L ?

According to the Support site the latest firmware for DCS-942L is 1.26 ?
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

banchang

  • Level 1 Member
  • *
  • Posts: 2
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #3 on: August 10, 2016, 07:47:44 AM »

Thanks - the different parts of the DLINK website don't appear to be in sync/updated.

The support page for products says 1.26 is latest, but if you search you do indeed find 1.27.

Thanks for update.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #4 on: August 10, 2016, 08:36:58 AM »

Ya sometimes both sites are not updated together.

Let us know how it goes.  ;)
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

vabba314

  • Level 1 Member
  • *
  • Posts: 10
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #5 on: October 24, 2016, 07:15:46 AM »

Both User Name and Password fields in the Video Clip and Snapshot settings tabs under Setup are still limited to 30 chars.
This still prevents me from using my Microsoft first e-mail alias as User Name (it is 34 chars long!).

I reported this a long time ago, but I see they haven't fixed this issue yet.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #6 on: October 24, 2016, 07:23:32 AM »

If this has been resolved by now, it may never be. There maybe security reasons why. I recommend that you may need to use a shorter email alias account.

Both User Name and Password fields in the Video Clip and Snapshot settings tabs under Setup are still limited to 30 chars.
This still prevents me from using my Microsoft first e-mail alias as User Name (it is 34 chars long!).

I reported this a long time ago, but I see they haven't fixed this issue yet.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

eamcintosh

  • Level 1 Member
  • *
  • Posts: 3
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #7 on: February 20, 2017, 06:10:36 PM »

Upgraded my Rev.A DCS-942L to latest 1.27 firmware.  Using MyDlink Web Portal cannot view SD card video files (H.264 MP4)...get file media error. Also cannot view same files using MyDlink Lite app on my Android smartphone...get File not found error (404).   The MP4 videos files on SD card can be downloaded to my PC when accessing the webcam locally. Files play fine.

Reinstalled the previous 1.26 firmware on the webcam,  video files on SD card play fine via MyDlink Web portal and Lite app on smartphone.

Obviously this update was not tested very well.   The old adage applies here...if its working fine, don't touch it !
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #8 on: February 20, 2017, 06:23:58 PM »

Did you factory reset and then set up the camera again from scratch after applying the update?
What PC platform are you using?
What browser are you using? Happen with IE11 or FF?
Be sure to clear any browser caches, exit the browser then reopen the browser and reconnect.


« Last Edit: February 20, 2017, 06:29:07 PM by FurryNutz »
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

eamcintosh

  • Level 1 Member
  • *
  • Posts: 3
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #9 on: February 20, 2017, 06:29:08 PM »

No. Never had to do that on previous updates. Upgrade instructions do not tell you to do this.   I'll try it when I get a chance but I need something that works now.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #10 on: February 20, 2017, 06:30:33 PM »

Ok, do when you can. So far your the only one posting about this kind of behavior. There maybe new items in the FW that may need a new factory update and set up.

If you can't get v1.27 to work, let us know. I'll pass it on to D-Link for review.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

eamcintosh

  • Level 1 Member
  • *
  • Posts: 3
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #11 on: February 21, 2017, 04:00:20 PM »

Good news. I factory reset on the 1.26 firmware and then upgraded to 1.27 and as far as I can see all is working ok now. I can view SD video recordings on my smartphone using myDlink Lite and also via the MyDlink Web portal.  The latter is working on IE11 and Firefox but apparently Windows Chrome doesn't support the extension needed anymore. No worries 2 browsers are enough.   Thanks FurryNutz for your help.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #12 on: February 22, 2017, 11:18:02 AM »

Glad it's working. I guess a factory reset is a good thing before upgrading FW. Thanks for confirming this.  ;)
Yes Google makes it hard to use 3rd party plug-ins in there browsers now days.
Also...
http://www.ghacks.net/2015/04/15/chrome-42-blocks-java-silverlight-other-plugins-by-default-now/
Yes there was issues when Chrome pulled the plug on Java based applications - they disabled NPAPI plugins - anyone could go into Chrome and enable NPAPi   http://knowledge.kaltura.com/enabling-silverlight-plugin-npapi-plugins-chrome  make sure you scroll to bottom and click "relaunch now"

After Chrome disabled Java (NPAPI) D Link decided to create it's own plugin "Universal Media Player" but AFAIK Chrome users still needed to enable NPAPI

Chrome threatened to block all Java type because of security issues then D Link jumped on the band wagon again and now there is an app (extension) called mydlink services plugin   https://chrome.google.com/webstore/detail/mydlink-services-plugin/ldibdoepbjbkkcbgndfljnphngpglhbb?utm_source=chrome-app-launcher-info-dialog

Enjoy.  ;)
« Last Edit: February 22, 2017, 11:19:50 AM by FurryNutz »
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

AntonyDu92

  • Level 1 Member
  • *
  • Posts: 2
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #13 on: March 18, 2017, 10:34:28 AM »

The "enable NPAPi" trick can't be done in newer versions of Chrome.
I have tried "Universal Media Player" both in Firefox 52 and Chrome 57. It does not change the live view problem.
see my post in http://forums.dlink.com/index.php?topic=66483.15
The  mydlink services plugin may be the solution for access via mydlink.com with chrome (not OK for me, probably my old firmware i don't want to change because i experienced problems with newer ones), but i prefer direct Local Network access, not internet access.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43934
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: New - DCS-942L Rev A - Firmware v1.27 Comments & Observations
« Reply #14 on: March 18, 2017, 12:06:58 PM »

IE11 for Windows and Safari for Mac is working for me with my DCS-933L and 960L and other cloud devices.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting
Pages: [1] 2