• September 23, 2017, 06:16:01 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: log problems and upload speed problems  (Read 2339 times)

ZeroUrashima

  • Level 1 Member
  • *
  • Posts: 1
log problems and upload speed problems
« on: March 07, 2016, 02:26:26 AM »

Tried reading other posts but nothing really helped.

Region Canada
Wireless
No Factory Reset, out of the box and installed

Firmware: 2.03

Log:
Mar 7 05:21:05   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is
Mar 7 05:21:03   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is
Mar 7 05:21:01   user.warn: kernel: add   0.0.0.0/0.0.0.0 to access 0.0.0.0/0.0.0.0:14599 directly[10/10].
Mar 7 05:21:01   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is
Mar 7 05:20:59   user.warn: kernel: add   0.0.0.0/0.0.0.0 to access 0.0.0.0/0.0.0.0:0 directly[10/10].
Mar 7 05:20:59   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is
Mar 7 05:19:57   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is
Mar 7 05:19:55   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is
Mar 7 05:19:53   user.warn: kernel: add   0.0.0.0/0.0.0.0 to access 0.0.0.0/0.0.0.0:23850 directly[10/10].
Mar 7 05:19:53   daemon.err: miniupnpd[24072]: Can't find in which sub network the client is



When Doing Speed Tests, the Ping and Download Speed are fine but the Upload Speed is Unstable, it goes from anywhere from 0.2M to 1.3M.
My connection is 10M/1M and it's really killing me with low upload speeds.

The errors dont bug me that much but it's the only thing that looks wrong to me.
I tried looking things up but nothing seemed to really work. The QoS was originally disabled and someone in a forum suggested enabling it and putting it to 40000, I've tried that and set it to 1M and it's still unstable.

The internet was working fine with the old D-Link I was using except that sometimes, I would get disconnected even though the system says connected (can't even access router's setup) and it was bugging me and changed to this one but the upload speeds are horrible.


Edit:
Also, I don't know why but my upload speed are worse on 5Ghz.
On 5Ghz, my speed test gave earlier gave me 10.4M/0.75M
Then on 2.4Ghz, my speed test gave me 10.4M/1M.
Also, I returned on 5Ghz afterwards again and got 10.4M/0.38M
But the next test on 2.4Ghz gave me 10.4M/1M again

No one uses 5Ghz in my neightbourhood so no inference and I'm alone in channel 9 too. I have no clue why it's this bad.
The 2.4Ghz is more stable but gets in the 0.5M sometimes too


Edit:
It kinda felt slow for my flash game and went to check speed again
On 2.4Ghz, it got to 10.1M/0.57M.
The upload speed is really unstable, only 10 mins since I got the 1M, my whole family is still sleeping and I'm alone on the network...
« Last Edit: March 07, 2016, 05:15:52 AM by ZeroUrashima »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43133
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: log problems and upload speed problems
« Reply #1 on: March 12, 2016, 11:13:27 AM »

Link>Welcome!

Do wired connection speeds work well?


Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
  • Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.

 
Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy
  • Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
  • What wireless modes are you using?
  • 2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
  • Channel Width set for Auto 20/40Mhz or try 20Mhz only.
  • Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
  • What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
  • What wireless devices do you have connected?
  • Ensure any devices with WiFi adapter drivers are updated.
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
  • If you have any of these options, Try turning OFF or ON Short GI, WLAN Partition, Extra Wireless Protection and HT 20/40 Co-existence if you have it. Also testing with HT20/40Mhz Co-existence enabled will impact results as well. I prefer to use this option OFF. Recommended settings are default. Under Advanced/Advanced Wireless.

Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials
http://www.foxnews.com/tech/2015/10/27/how-to-get-stronger-wi-fi-signal.html?icid=maing-grid7|main5|dl31|sec1_lnk3%26pLid%3D1839803170
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting