• September 21, 2017, 11:21:56 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 ... 4 5 [6]

Author Topic: FORUM USER REQUESTS and BUGS  (Read 28004 times)

square_eyes

  • Level 2 Member
  • **
  • Posts: 29
Re: FORUM USER REQUESTS and BUGS
« Reply #75 on: November 16, 2016, 02:04:43 AM »

Couple of questions (well, #2 seems to be a bug)

1. Do we need to update to this version if we already grabbed 1.08 WW off the Russian site? - i.e. is there any difference?
2. I just went to use the Quick VPN. After entering settings (L2TP over IPsec, user, pass, psk) and click save. You are returned to the router login. Going back to the VPN the settings are not saved and the VPN doesn't work.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #76 on: November 16, 2016, 06:36:39 AM »

Yes there is a difference. I don't think the version from the Russia site has any of the changes in the most current one.

If you upgrade to B04, do a factory reset before and after manually loading the FW file. Use IE or FF for this. Clear the browser cache before and after sending the file, then after the last factory reset, walk the set up wizard, then go in and configure the router and configure the Quick VPN feature and let us know if you can get the router to save the settings. Seen this before when QoS was configured and didn't save the setting.  ::)

Keep us posted.

Couple of questions (well, #2 seems to be a bug)

1. Do we need to update to this version if we already grabbed 1.08 WW off the Russian site? - i.e. is there any difference?
2. I just went to use the Quick VPN. After entering settings (L2TP over IPsec, user, pass, psk) and click save. You are returned to the router login. Going back to the VPN the settings are not saved and the VPN doesn't work.
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #77 on: November 16, 2016, 08:48:59 AM »

New Feature:
Graphics on tiles to identify LAN wired and wireless connected clients. And wireless signal level gauges.


Thank you D-Link.  :D
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

laforcem

  • Level 1 Member
  • *
  • Posts: 4
Re: FORUM USER REQUESTS and BUGS
« Reply #78 on: January 25, 2017, 11:31:22 AM »

Maybe a bug.

DIR-880L / A2 / 1.07WW

The router will allow https traffic from the Internet to any device in the LAN if no virtual rule exist for port 443.

I have 2 devices that can be accessed through https (443). If any of them are connected, the router will randomly choose one.

This is concerning since the router should block any non-authorized access.

I created a rule on 443 to deny access using the calendar to fix the issue but I think this is a serious security issue.

Also, this router is not working well with WOL since we cannot broadcast a rule on 192.168.0.255.

Martin
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #79 on: January 25, 2017, 12:19:01 PM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?

Do you have uPnP enabled? Do you have any of the remote router UI access features enabled?

Can you test with v1.08 and see?

This model router may not support loopback for WoL features.

Maybe a bug.

DIR-880L / A2 / 1.07WW

The router will allow https traffic from the Internet to any device in the LAN if no virtual rule exist for port 443.

I have 2 devices that can be accessed through https (443). If any of them are connected, the router will randomly choose one.

This is concerning since the router should block any non-authorized access.

I created a rule on 443 to deny access using the calendar to fix the issue but I think this is a serious security issue.

Also, this router is not working well with WOL since we cannot broadcast a rule on 192.168.0.255.

Martin
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

laforcem

  • Level 1 Member
  • *
  • Posts: 4
Re: FORUM USER REQUESTS and BUGS
« Reply #80 on: January 25, 2017, 03:03:59 PM »

DIR-880L
Hardware version A2
Firmware version 1.07WW
on CABLE DHCP - Region is CANADA/ ISP Modem is Videotron / Unknown model

uPnP is enabled
UI access is enabled on HTTPS

I can test 1.08 later.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #81 on: January 25, 2017, 03:17:03 PM »

Does same thing happen if you disable uPnP and remote access to UI?
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

laforcem

  • Level 1 Member
  • *
  • Posts: 4
Re: FORUM USER REQUESTS and BUGS
« Reply #82 on: January 26, 2017, 05:42:15 AM »

Ok... it is not a bug.  By default Upnp is enabled on this router and this is a security risk.

Maybe it should be disabled by default as recommend.

http://www.howtogeek.com/122487/htg-explains-is-upnp-a-security-risk/
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #83 on: January 26, 2017, 07:22:56 AM »

That's a 5 year old article, even though it does have some good info, for time it was written, uPnP implementations was fixed. It was a core uPnP driver issue that all Mfrs including DD-WRT and OpenWRT was using at the time. The issue was fixed I believe. Been a while.  ???

I've asked to see if what your noticing with uPnP on the 880L is a problem or not.
D-Links says current uPnP works as designed. Not a bug.

« Last Edit: January 26, 2017, 04:42:44 PM by FurryNutz »
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

hydra3333

  • Level 2 Member
  • **
  • Posts: 34
Re: FORUM USER REQUESTS and BUGS
« Reply #84 on: March 01, 2017, 01:02:38 AM »

I've asked to see if what your noticing with uPnP on the 880L is a problem or not.
D-Links says current uPnP works as designed. Not a bug.

ha ha ha ha ... I work near a foreign manufacturer ... and that's what they say for certain bugs that are reported ... ha ha ha ha ... if doesn't mean it isn't a bug or security risk  ... ha ha ha
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #85 on: March 01, 2017, 06:56:42 AM »

uPnP implementations were fixed.
Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43125
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: FORUM USER REQUESTS and BUGS
« Reply #86 on: March 10, 2017, 07:10:53 AM »

Logged
Cable:100mb/3Mb>Motorola SB6183>DIR-880L>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,826L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L and a Boxee.
Go Here>Router Troubleshooting
Pages: 1 ... 4 5 [6]