• October 22, 2017, 02:11:06 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2 3 ... 5

Author Topic: DCS-825L Web Pages: config and remote view  (Read 120779 times)

francorg

  • Level 1 Member
  • *
  • Posts: 24
DCS-825L Web Pages: config and remote view
« on: January 28, 2014, 02:31:46 AM »

I found the following configuration web pages on my DCS-825L.
To access them you have to use:
user = admin
password = the password of your webcam, usually configured during first time setup wizard

1. http://ip_address/eng/liveView.cgi or http://ip_address/eng/mainFrame.cgi
Here you can access the typical DLink web config page with several sections:
- a liveview page which requires the CamCliCtrl (InstallCamCliCtrl.msi) which is missing and I couldn't find a way to make it working (tried on IE10 and Chrome 33)
- a setup page where you can config the wireless lan setup and also access to the SD storage
- a maintenance page where to upgrade the firmware
- a status page with the typical info (ip address, mac address, etc.)
- a help page containing some disclaimers

2. http://ip_address/eng/admin/
here you can access two configs:
- internet connection wizard or manual setup
- motion detection wizard or manual setup this one doesn't work as I cannot enable the CamCliCtrl plugin, as explained in point 1. above

3. http://ip_address/image/jpeg.cgi
here you get a screenshot of the actual webcam view

4. http://ip_address/video/mjpg.cgi
here you get a live stream of your webcam. To access I use VLC player, by opening a Network Stream and putting in the url above.

I succeeded also in forwarding a port on my firewall in order to have direct access to the url above also when I am not at home by pointing to the public ip address of my home internet connection.

I think that every URL above it's also accessible through https protocol on standard port 443.


For the moment this is all I discovered.
If you have further info please contribute to this post.

Roberto
Logged

bhillou

  • Level 1 Member
  • *
  • Posts: 13
Re: DCS-825L Web Pages: config and remote view
« Reply #1 on: January 28, 2014, 05:10:36 AM »

Very nice ! The mainFrame.cgi seems to be the usual DLink Web interface but it is missing some of the settings that are available in the other screens. Hopefully this is because they are working on integrating them and it will be announced in a later firmware ?
Logged

rose05

  • Level 1 Member
  • *
  • Posts: 24
Re: DCS-825L Web Pages: config and remote view
« Reply #2 on: January 30, 2014, 09:30:24 PM »


- a liveview page which requires the CamCliCtrl (InstallCamCliCtrl.msi) which is missing and I couldn't find a way to make it working (tried on IE10 and Chrome 33)

Roberto

hi francorg,

I find this file but its also not working for me, maybe its a to old version. >:(

InstallCamCliCtrl.msi

rose05
Logged

pri77y

  • Level 1 Member
  • *
  • Posts: 16
Re: DCS-825L Web Pages: config and remote view
« Reply #3 on: February 15, 2014, 05:43:46 AM »

CamCliCtrl not working for me either....
Logged

DavidAu

  • Level 1 Member
  • *
  • Posts: 10
Re: DCS-825L Web Pages: config and remote view
« Reply #4 on: March 07, 2014, 10:23:06 PM »

Thanks Francorg, I'm experiencing the same issue with the NCS plugin in all browsers.. Hope a future firmware release might fix it.

Some additional useful URLs:
5. rtsp://admin:passwd@ipaddr:554/play1.sdp ~ 720p 25fps
6. rtsp://admin:passwd@ipaddr:554/play2.sdp ~ 360p 10fps
7. rtsp://admin:passwd@ipaddr:554/play3.sdp ~ 360p 10fps
These are available to view an ffMPEG live stream with audio using RTSP (H.264/MPEG4 encoding).
Achieved successful playback of these streams over TCP or UDP using various methods:

Advanced URLs:
8. http://ipaddr/cgi/admin/tools_admin.cgi
Returns XML of config settings (incl. your admin password in plaintext!) - seems there will be scope to enable multiple users in future.

9. http://ipaddr/cgi/admin/telnetd.cgi?command=on
Does anyone know the login/password to login to the Linux Telnet console (e.g. using PuTTY) after running this command in your browser?
Logged
DCS-825L Baby-cam Owner

CF76

  • Level 1 Member
  • *
  • Posts: 6
Re: DCS-825L Web Pages: config and remote view
« Reply #5 on: March 19, 2014, 08:56:08 AM »

Hi guys, I just bought a 933L and 825L.
I made some experiment with 825L.
I'm using IP Cam for live view and searching with it the 825L is founded like DCS 1130.
In this 3d http://forums.dlink.com/index.php?topic=50579.0 I test the DCS 1130 emulator looking the url.
for example:
http://support.dlink.com/emulators/dcs1130/recorder.html
In my network i change with the ip address and html with cgi and it works:
ipaddr/recorder.cgi

fod ddns adv_ddns.html became ipaddr/adv_ddns.cgi

I hope that can help.

Bye

(sorry for my english)
Logged

francorg

  • Level 1 Member
  • *
  • Posts: 24
Re: DCS-825L Web Pages: config and remote view
« Reply #6 on: March 22, 2014, 09:11:27 AM »

Thank you CF76!

Great discovery!!

On my webcam it works by using this type of url: http://ip_address/eng/admin/recorder.cgi

Roberto

Logged

babymaker

  • Level 1 Member
  • *
  • Posts: 1
Re: DCS-825L Web Pages: config and remote view
« Reply #7 on: April 03, 2014, 05:30:19 PM »

A couple more pages I have found:

http://ipaddr/eng/admin/support_tools.cgi
- List of possible settings and what they mean? No selectable settings though..

http://ipaddr/eng/admin/tools_admin.cgi - Change admiin password, add user accounts, authentication, device settings (on screen display, turn led on, off, flicker?)

http://ipaddr/eng/admin/tools_system.cgi
- Time configuration, automatic time configuration, set time manually. (Note this is what set me down this path of looking for pages as my time was always incorrect no matter if I selected synchronize in the app. Thie issue was because the setting in here was setting the time to automatically use a dlink server?!) Unchecked automatic synch, selected my timezione, and clicked save and it took about a minute for the settings to be saved to my camera... it works!

http://ipaddr/eng/admin/st_log.cgi - xml info? under construction?

http://ipaddr/eng/admin/adv_lan.cgi
- Port Settings, Port Forwarding

http://ipaddr/eng/admin/adv_wireless.cgi
- Enable AP Client?

http://ipaddr/eng/admin/adv_image.cgi
- Shows a live video stream with image settings!

http://ipaddr/eng/admin/adv_snapshot_cont.cgi
- Snapshot (email snapshots on motion detection?)

http://ipaddr/eng/admin/tools_default.cgi - save to local hard drive, factory reset, reboot








« Last Edit: April 03, 2014, 08:49:02 PM by babymaker »
Logged

ferdu-42

  • Level 1 Member
  • *
  • Posts: 4
Re: DCS-825L Web Pages: config and remote view
« Reply #8 on: April 03, 2014, 08:47:03 PM »

Hi everybody!

One more page I have found:

http://ipaddr/eng/admin/adv_record.cgi

Why D-link doesn't make a single page for the configuration of this camera, aka "http://ipaddr".
And the iPhone/iPad app is so slughish, D-link needs to redesign this ios app.
Funny is, i just love this camera, and i use it for monitoring my cats! But it needs more and more improvements.....
 
« Last Edit: April 07, 2014, 03:39:43 PM by ferdu-42 »
Logged

CF76

  • Level 1 Member
  • *
  • Posts: 6
Re: DCS-825L Web Pages: config and remote view
« Reply #9 on: April 07, 2014, 08:16:06 AM »

one more page:

ipaddr/eng/admin/support_men.cgi

is the help page, see the Music Player menu!!! you can upload your own music.

We MUST find this page.

bye
Logged

ferdu-42

  • Level 1 Member
  • *
  • Posts: 4
Re: DCS-825L Web Pages: config and remote view
« Reply #10 on: April 07, 2014, 11:23:50 AM »

Hi! Everybody...
I corrected my last post!
I still can't upload musics to the SD card? Even using the http://ipaddr/eng/admin/support_men.cgi
I never see a option to upload musics to the SD.
Someone help me!
Thanks...
Logged

friggingreat

  • Level 1 Member
  • *
  • Posts: 9
Re: DCS-825L Web Pages: config and remote view
« Reply #11 on: April 09, 2014, 10:13:41 AM »

Once you enable the telnet options with...

http://192.168.0.11/cgi/admin/telnetd.cgi?command=on

You can login to the system with

U/N : root
P/W : admin
Logged

francorg

  • Level 1 Member
  • *
  • Posts: 24
Re: DCS-825L Web Pages: config and remote view
« Reply #12 on: April 09, 2014, 10:36:47 PM »

Once you enable the telnet options with...

http://192.168.0.11/cgi/admin/telnetd.cgi?command=on

You can login to the system with

U/N : root
P/W : admin

It doesn't work on mine with the latest firmware.
Does it work for you? Can you send a dir command and retrieve all the cgi file names?

Roberto
Logged

friggingreat

  • Level 1 Member
  • *
  • Posts: 9
Re: DCS-825L Web Pages: config and remote view
« Reply #13 on: April 10, 2014, 10:40:59 PM »

Hi Roberto,
I haven't upgraded to the newer firmware just yet.
Here is what I get when I request 'help' with telnet.

BusyBox v1.20.2 (2013-09-24 23:39:31 MAGT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

# help
Built-in commands:
------------------
        . : alias bg break cd chdir continue echo eval exec exit export
        false fg hash help jobs kill let local printf pwd read readonly
        return set shift times trap true type ulimit umask unalias unset
        wait

#
Logged

francorg

  • Level 1 Member
  • *
  • Posts: 24
Re: DCS-825L Web Pages: config and remote view
« Reply #14 on: April 11, 2014, 02:09:52 AM »

If you send the command "ls" (LS lowercase without quotes) does it return the file list?

Roberto
Logged
Pages: [1] 2 3 ... 5