• September 20, 2017, 01:02:55 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNR-322L - Cumulative Firmware Release Notes  (Read 10368 times)

JavaLawyer

  • Poweruser
  • Level 15 Member
  • *****
  • Posts: 12171
  • D-Link Global Forum Moderator
    • FoundFootageCritic
DNR-322L - Cumulative Firmware Release Notes
« on: November 26, 2012, 08:22:46 AM »

DNR-322L Cumulative Firmware Release Notes

Firmware: 2.00b07 - Date: 12/26/2013

  • [New Feature] Support push notification with D-ViewCam mobile (Android v1.2 and iOS v1.3)
  • [New Feature] Support cross browser include MS-IE, Mac Safari, Chrome with partial function (Note: the following functions are not supported in Safari and Chrome: (a) Live Viewer: Preset/E-Map/Fix Aspect Ratio/ Full screen/Auto Scan/Manual Recording/Remote IO/Logout server and (b) Playback: Smart search/Print/Backup/Image Enhancement/Logout Server
  • [New Feature] Support Win8 (Not including Metro Mode)
  • [New Feature] Support IE10
  • [New Feature] Support new IP cameras: DCS-932L/2136L/3010/3130/5010L/5020L/6513
  • [Enhancement] Add “ manual record” option for admin to enable and disable in user management
  • [Enhancement] Remove second stream hint
  • [Enhancement] Modified OSD/Region function name in snapshot dialog
  • [Enhancement] Super model enhancement (NIPCA 1.9.5)
  • [Enhancement] Extend the time out mechanism of camera UPnP search
  • [Bug Fix] DBG13010374 When I tried to use IE 10 to test , in Live Video, right click mouse on one of DCS, but the pop up window did not show correct option, please check attachment
  • [Bug Fix] DBG12090172 Save Settings icon would be grey after change the Display mode of DCS-6010L
  • [Bug Fix] DBG12070098 There is no digital signature on the tab in NVR AP.
  • [Bug Fix] DBG12060231 There Digital signature is wrong on Playback.exe after installation.
  • [Bug Fix] DBG12050172 DUT make DCS-6616 to focus near/far failed.
  • [Bug Fix] DBG12100166 IE 10 cannot work , after installing necessary component (D-LinkNVS322.cab) twice but still cannot show live view
  • [Bug Fix] DBG12090226 Convert a recording file by NVR Basic would be failed
  • [Bug Fix] DBG12090209 The web browser would be crashed when start to convert a video file
  • [Bug Fix] DBG11080015 Video quality of a exported avi file would be poorer than playback
  • [Bug Fix] DBG11100238 A warning message would popup after live view for more than 60 hours
  • [Bug Fix] Fixed email show “NVRmini” bug
  • [Bug Fix] Modify the default setting in server and AP. (Please refer to note)
  • [Bug Fix] Fixed the issue that error message “The format of URL login is invalid” would pop-up after user apply camera settings
  • [Bug Fix] Fixed the issue that Live view/playback cannot work after enable SSL in WEB GUI
  • [Bug Fix] Fixed the issue that NVR response failed for IP camera search
  • [Bug Fix] Fixed the bug that DCS-5010L/5020L audio support fail
  • [Bug Fix] Fixed the bug that install wizard can’t search camera
  • [Bug Fix] Security - Authentication bypass vulnerability
  • [Bug Fix] Security - Remote Unauthenticated Information Disclosure Vulnerability
  • [Bug Fix] Security - Remote unauthenticated arbitrary firmware upload vulnerability
  • [Bug Fix] Security - Remote unauthenticated Denial-of-Service Vulnerability
  • [Bug Fix] Security - Remotely create a new USER
  • [Bug Fix] Security - Remote admin password reset
  • [Bug Fix] Modify copyright format
  • [Bug Fix] Fix HTTPs (advance setting) connection issue with mydlink portal
  • [Bug Fix] Fix re-start NVR service after unplug the USB cord on a UPS
  • [Bug Fix] Fix login DUT as a new user account via HTTPS port 4433 failed and would redirect to HTTP web UI
  • [Bug Fix] Fix restart samba when change date/time, NTP setting
  • [Known Error] DCS-6010L switch current view “when display mode is 1P2R, user shall click down-left corner to switch to up-right view.”
  • [Known Error] DCS-6915 - Motion detection and IO can only trigger once when camera connects to NVR
  • [Known Error] DCS-6915 - Do not support G.726 audio codec
  • [Known Error] DCS-7413: When frame rate is 1fps, camera would disconnected with NVR easily
  • [Known Error] DCS-5605/5635: camera will reboot when switch to dual Stream
  • [Known Error] DCS-3112: Preset01 will be overwrited by Preset02, so it won’t find Preset01 when it executes Patrol
  • [Known Error] Chrome on MAC is not supported because of JAVA compatibility issue http://java.com/en/download/faq/chrome.xml
  • [Known Error] When user remotely watches video which resolution is higher than D1 on non-IE browsers, Live view would crash
  • [Known Error] When user remotely watches video which resolution is higher than D1 on MAC, it will pop-up error message. User only needs to select stream profile low/minimum for avoiding this issue

Firmware: 1.50b03 - Date: 06/07/2013

  • [New Feature] Authentication Bypass
  • [New Feature] Multiple Remote Unauthenticated Information Disclosure
  • [New Feature] Remote unauthenticated arbitrary firmware upload
  • [New Feature] Remote unauthenticated Denial-of-Service
  • [New Feature] Remotely create a new USER
  • [New Feature] Remote admin password reset

Firmware: 1.40b01 - Date: 03/20/2013

  • [New Feature] Support DCS-6010L fish eye current view switch function
  • [New Feature] Use admin as default user name (camera) in NVR
  • [New Feature] Implement camera status/name in server
  • [New Feature] Support new cameras : DCS-6915/933L/931L/6314
  • [New Feature] Integrate profile 3 of DCS-5605/5635/3411/3430
  • [New Feature] Upgrade camera firmware of 7 models: DCS-3715/5605/5635/6818/930L/2310L/3112
  • [New Feature] Removed DCS-3713/932LB1 from support list
  • [Bug Fix] DBG12050172 DUT make DCS-6616 to focus near/far failed
  • [Bug Fix] DBG12060117 DUT could change DCS-2210/2230 frame rate to 30 with resolution 1920X1080 and show update successfully
  • [Bug Fix] Fix recording performance issue
  • [Bug Fix] Modify copyright format
  • [Bug Fix] Fix re-start NVR service after unplug the USB cord on a UPS
  • [Bug Fix] Fix login DUT as a new user account via HTTPS port 4433 failed and would redirect to HTTP web UI
  • [Bug Fix] Fix restart samba when change date/time, NTP setting
  • [Known Issue] DCS-942L: When “PIR” is enabled, it cannot get motion detection correctly
  • [Known Issue] The IE browser will crash when direct connect DNR-322L after install Bing bar. No add-on toolbar allowed: Based on the characteristic of add-on and current IE structure, add-on might be interfered by other add-ons. This is why we always announce don’t install any add-on with our SW (i.e. google toolbar, Bing, etc.)
  • [Known Issue] The IE browser will crash when relay connect DNR-322L. Browser hangs 15~25 seconds as network disconnected: Under the current structure, the way of communication between UI and ActiveX is synchronized. When encountering unstable network while ActiveX doesn’t detect its disconnection, it takes time to ActiveX for trying to communicate with remote NVR server. In this way, UI might be blocked during this period because of waiting for ActiveX’ response
  • [Known Issue] DNR322L cannot find cameras in device list with SMC router
  • [Known Issue] DNR-322L cannot find 940L in 322L’s web GUI by Netgear router
  • [Known Issue] Can’t switch current view of DCS-6010L because camera firmware is not ready
  • [Known Issue] Can’t fix bug DBG12030320 with firmware v2.00.03 (DUT modify DCS-3710B1 bit rate quality would become CBR.) because root cause is camera firmware issue

Firmware: 1.30b02-0920 - Date: 10/18/2012

  • [New Feature] Samba will block "video folder" (VIDEODATA)
  • [New Feature] Sync telnet password as same as admin account
  • [New Feature] NTP add one message window to alert user adjust time zone
  • [New Feature] Support DDP
  • [New Feature] Support new cameras :
  • [New Feature] DCS-6010L/7010L/6210/7513/7413/2310L/2132L/2332L
  • [Bug Fix] Fix security Issue of Samba
  • [Bug Fix] Fix daylight saving time
  • [Bug Fix] Fix PPPoE connection bug in setup wizard
  • [Bug Fix] Fix swap not enable in standard mode after reboot
  • [Bug Fix] DBG11120114 (1) [NVR Pro \ Backup, LiveView] Copyright shall be about D-Link product information.(2) Control panel should show D-Link logo
  • [Bug Fix] DBG11120115 [AP_326_1.0.0.86_20111115\ AP\ setup.exe] There shall be a tab for Digital signature
  • [Bug Fix] DBG11120116 [D-ViewCAM NVR Pro] Publisher shall be D-Link : Install and Uninstall.
  • [Bug Fix] DBG12050017 Copyright of setup.exe would be incorrect
  • [Bug Fix] DBG12050158 The information of copyright are incorrect
  • [Bug Fix] DBG12050163 Backup DNR-322L recording file in Chinese folder and execute viewer would show error message missing or corrupted resource files
  • [Bug Fix] DBG12060117 DUT could change DCS-2210/2230 frame rate to 30 with resolution 1920X1080 and show update successfully
  • [Bug Fix] DBG12090226 Convert a recording file by NVR Basic would be failed
  • [Bug Fix] DBG12090209 The web browser would be crashed when start to convert a video file
  • [Known Issue] DCS-942L: When “PIR” is enabled, it cannot get motion detection correctly
  • [Known Issue] The IE browser will crash when direct connect DNR-322L after install Bing bar No add-on toolbar allowed: Based on the characteristic of add-on and current IE structure, add-on might be interfered by other add-ons. This is why we  always announce don’t install any add-on with our SW (i.e. google toolbar, Bing, etc.)
  • [Known Issue] The IE browser will crash when relay connect DNR-322L. Browser hangs 15~25 seconds as network disconnected: Under the current structure, the way of communication between UI and ActiveX is synchronized. When encountering unstable network while ActiveX doesn’t detect its disconnection, it takes time to ActiveX for trying to communicate with remote NVR server. In this way, UI might be blocked during this period because of waiting for ActiveX’ response
  • [Known Issue] DNR322L cannot find cameras in device list with SMC router
  • [Known Issue] DNR-322L cannot find 940L in 322L’s web GUI by Netgear router
  • [Known Issue] Can’t switch current view of DCS-6010L because camera firmware is not ready
  • [Known Issue] Can’t fix bug DBG12030320 with firmware v2.00.03 (DUT modify DCS-3710B1 bit rate quality would become CBR.) because root cause is camera firmware issue.

Firmware: 1.20b04-0525 - Date: 08/01/2012

  • [New Feature] Dual stream support for mobile and remote live view with limited bandwidth
  • [New Feature] Traditional Chinese GUI support
  • [New Feature] Code base upgrade for Java SDK compatibility
  • [Bug Fix] Fixed the issue that the quality value of DCS-7110 is not synchronized between NVR page and camera web (D-Lab DBG11120028)
  • [Bug Fix] Fixed the issue that users are unable to change the video format of DCS-3710 from MJPEG to MPEG4 (D-Lab DBG11120029)
  • [Bug Fix] Non-admin users should be able to drag timeline bar and audio bar on playback (D-Lab DBG11120067)
  • [Bug Fix] For those channels users are with privilege to access to in playback, the check box of them in backup page should not be grey out (D-Lab DBG11120068)
  • [Bug Fix] Correct the popup message in Chinese of send test mail (D-Lab DBG11120252)
  • [Bug Fix] Implement continuous PTZ on DCS-681XB1 to fix upside down issue and synchronize DVC (D-Lab DBG11120071 & DBG11120279)
  • [Bug Fix] Fixed the issue that live view page would keep in login server status and click cancel didn't respond in first time (D-Lab DBG12030272)
  • [Bug Fix] Fixed the issue that DCS-2230/3716/6112V support max frame rate is 15 but DUT could select 30 in UI (D-Lab DBG12030286 & DBG12030288)
  • [Bug Fix] Fixed the issue that when DCS-3716 frame rate is 15 but DUT would show 30 (D-Lab DBG12030288)
  • [Bug Fix] Fixed the issue that DUT modify DCS-6112V frame rate to 30 would cause DCS-6112V webpage frame rate became incorrect customize 30 fps (D-Lab DBG12030289)
  • [Bug Fix] Fixed the issue that DUT live view DCS-6112V failed and stop connecting (D-Lab DBG12030274)
  • [Bug Fix] Fixed the issue that a warning message would popup after live view for more than 60 hours (D-Lab DBG11100238)
  • [Bug Fix] Fixed the issue that playback 4 cameras recording files for 2-3 hours would show the connection is terminated or timeout as attachment picture (D-Lab DBG11120036)
  • [Bug Fix] Fixed the issue that export a 2 hours video file would show the connection is terminated or timeout (D-Lab DBG12050217)
  • [Bug Fix] Fix the year of copyright
  • [Bug Fix] Fix remaining space capacity incorrect
  • [Known Issue] DCS-942L: When “PIR” is enabled, it cannot get motion detection correctly
  • [Known Issue] The IE browser will crash when direct connect DNR-322L after install Bing bar. No add-on toolbar allowed: Based on the characteristic of add-on and current IE structure, add-on might be interfered by other add-ons. This is why we always announce don’t install any add-on with our SW (i.e. google toolbar, Bing, etc.)
  • [Known Issue] The IE browser will crash when relay connect DNR-322L Browser hangs 15~25 seconds as network disconnected: Under the current structure, the way of communication between UI and ActiveX is synchronized. When encountering unstable network while ActiveX doesn’t detect its disconnection, it takes time to ActiveX for trying to communicate with remote NVR server. In this way, UI might be blocked during this period because of waiting for ActiveX’ response
  • [Known Issue] DNR322L cannot find cameras in device list with SMC router
  • [Known Issue] DNR-322L cannot find 940L in 322L’s web GUI by Netgear router

Firmware: 1.10b02-1206 - Date: 12/06/2012

  • [New Feature] Traditional Chinese language support
  • [New Feature] RAID + file server configuration
  • [Bug Fix] Log issue : a. no System Has Rebooted From A Power Failure.log b.no user logout log
  • [Bug Fix] The RAID status information was become standard when insert a raw disk.
  • [Bug Fix] DDNS : password include special character
  • [Bug Fix] After setup DNR-322L PPPoE by wizard, it would show DHCP in NVR information
  • [Bug Fix] Sometimes upload firmware fail.
  • [Bug Fix] Language pack update for RAID function
  • [Bug Fix] Fix NVR cannot send G-Mail
  • [Bug Fix] Connection fail when NVR only connect one camera
  • [Known Issue] DCS-942L: When “PIR” is enabled, it cannot get motion detection correctly
  • [Known Issue] The IE browser will crash when direct connect DNR-322L after install Bing bar No add-on toolbar allowed: Based on the characteristic of add-on and current IE structure, add-on might be interfered by other add-ons. This is why we always announce don’t install any add-on with our SW (i.e. google toolbar, Bing, etc.)
  • [Known Issue] The IE browser will crash when relay connect DNR-322L. Browser hangs 15~25 seconds as network disconnected: Under the current structure, the way of communication between UI and ActiveX is synchronized. When encountering unstable network while ActiveX doesn’t detect its disconnection, it takes time to ActiveX for trying to communicate with remote NVR server. In this way, UI might be blocked during this period because of waiting for ActiveX’ response
  • [Known Issue] DNR322L cannot find cameras in device list with SMC router
  • [Known Issue] DNR-322L cannot find 940L in 322L’s web GUI by Netgear router

Firmware: v1.10b01 - Date: 10/13/2011

  • [Bug Fix] Log issue : a. no System Has Rebooted From A Power Failure.log and b.no user logout log
  • [Bug Fix] The RAID status information was become standard when insert a raw disk
  • [Bug Fix] DDNS : password include special character
  • [Bug Fix] After setup DNR-322L PPPoE by wizard, it would show DHCP in NVR information
  • [Bug Fix] Sometimes upload firmware fail

Firmware: v1.00b07 - Date: 08/30/2011

  • [New Feature] Update mydlink binary

Firmware: v1.00b06 - Date: 08/17/2011

  • [New Feature] support > 3TB hard drive
  • [Bug Fix] Fixed pppoe can't connect to internet on special case
  • [Bug Fix] Fixed read default xml file
  • [Bug Fix] Fixed No notification after click the "Save Settings" icon in Time Zone field

Firmware: v1.00b05 - Date: 07/25/2011

  • [New Feature] Support Internet Connection checking
  • [Bug Fix] The Wizard doesn't apply URL encode with '+' to the email address.(mydlink bugid 754)
  • [Bug Fix] When DNR-322L has many xmldb, it will be offline(mydlink bugid 1075)

Firmware: 1.00b04 - Date: 06/29/2011

  • [New Feature] Pack the latest NUUO package
  • [Bug Fix] Raid button "Create A New Volume From The Remaining Available Storage Space" is not long enough to show all words in French
  • [Bug Fix] The login page has field shifted issue in IE9
  • [Bug Fix] Fixed mydlink reported bug(bugid 979)

Firmware: 1.00b03 - Date: 05/13/2011

  • [Bug Fix] When successfully bound the device to the mydlink account (the http request to portal),  need to execute a command in device side : ˇ§/mydlink/tdb set DLink15 Register_byte=1ˇ¨. Itˇ¦s to let mydlink agent know that the device is registered
  • [Bug Fix] Fixed Setup Wizard hard to discover 322 issue
  • [Bug Fix] Add P3P HTTP header to each web page to solve showing many undefined words in web gui when I click NVR info's link issue

Firmware: 1.00b02 - Date: 05/09/2011

  • [Bug Fix] Support mydlink agent
  • [Bug Fix] Fixed some help file and translation issues
  • [Bug Fix] User's password is being changed even we select the "Skip" button
  • [Bug Fix] PPPoE's username and password can't accept special characters like " %"," & ,< "
  • [Bug Fix] DNS2 unable to be saved in DHCP Client mode
  • [Bug Fix] No logged event when fan is not installed
  • [Bug Fix] Unable to restore configuration setting when Volume_1 is full

Firmware: 1.00b01 - Date: 11/23/2012

  • [Bug Fix] Update opserver to fix NVR Search unable to show device name issue
  • [Bug Fix] When setting "set the date and time manually", it won't call startnvr
  • [Bug Fix] Fixed unable to run startnvr issue
  • [Bug Fix] Change copyright from 2010 to 2011
  • [Bug Fix]Support Samba, set Volume_2 as an open Samba share if exists
« Last Edit: February 14, 2014, 09:53:49 AM by JavaLawyer »
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC