D-Link Forums

The Graveyard - Products No Longer Supported => Hubs and Switches => Topic started by: lezde716 on November 19, 2013, 12:25:42 AM

Title: Dfl-800 Fail over
Post by: lezde716 on November 19, 2013, 12:25:42 AM

I have a problem with my fail over, it doesn't work seamlessly. when the primary ISP fails, you have to manually take off the cable from the WAN1 port for as the backup ISP will provide a connection.

Any suggestion regarding my problem.

This are my routing table:
1    Route    wan1    wan1net           80   Yes   
2    Route    wan1    all-nets    wan1_gw   80   Yes   
3    Route    wan2    wan2net           90   Yes   
4    Route    wan2    all-nets    wan2_gw   90   Yes   
5    Route    dmz            dmznet           100   No   
6    Route    lan            lannet           100   No

Route load balancing (Intances)
RoutingTable>Main
Algorithm>Destination

Title: Re: Dfl-800 Fail over
Post by: FurryNutz on February 20, 2014, 07:45:08 AM

Any status on this?  ???