D-Link Forums

D-Link FAQ => Network Camera FAQs => Topic started by: JavaLawyer on November 26, 2012, 08:28:21 AM

Title: DCS Network Cameras - Password Reset
Post by: JavaLawyer on November 26, 2012, 08:28:21 AM

In you are unable to access your DCS network camera due to a lost or forgotten password, this procedure can be used to set your admin password to the factory default settings. This procedure erase all previously saved settings on your DCS network camera.

Procedure

To reset your DCS network camera to the factory defaults, while powered-up, press and hold the "Reset Button" on the rear (or bottom) of the DCS network camera for > 5 seconds. This procedure will set the following login credentials:

• User name = admin
  
• Password = [BLANK]
  
  

Additional Resources

• Network Cameras - Searchable FAQ Index (http://forums.dlink.com/index.php?topic=58404.0)
  
• Network Cameras - Important Posts & Information (http://forums.dlink.com/index.php?topic=58121.0)