• April 16, 2024, 07:36:51 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 [3]

Author Topic: Is firmware v1.15 stable?  (Read 22345 times)

Puffnstuff

  • Level 3 Member
  • ***
  • Posts: 292
Re: Is firmware v1.15 stable?
« Reply #30 on: April 01, 2009, 04:54:29 PM »
I just wanted to say that 1.16b3 seems to be the best post 1.02 fw I've used so far.  If you haven't tried it you might want to give it a go before declaring the 4500 to be a total loss and give up on it.  If you're still on 1.02 don't you dare flash to anything yet.
Logged

anon

  • Level 3 Member
  • ***
  • Posts: 263
Re: Is firmware v1.15 stable?
« Reply #31 on: April 01, 2009, 07:24:12 PM »
I've been on f/w 1.16b not too long after it's release and didn't see a difference performance wise with PSN. It's been almost 7 months after 1.12 put the steel boots on the dgl-4500 I have, kinda hard not to be looking forward to the next one in the series.

I see the claims of those that have 1.15 and don't have issues with their PS3. Yet something tells me if they ever tried 1.02 and then any f/w after, they would notice a difference right away.

I know dlink is fixing what they can when they can. I guess the issues I have just happen to be on the bottom of that to do list.
Logged

HankRiker

  • Level 2 Member
  • **
  • Posts: 83
Re: Is firmware v1.15 stable?
« Reply #32 on: April 03, 2009, 02:24:50 PM »
Quote from: Puffnstuff on April 01, 2009, 04:54:29 PM
I just wanted to say that 1.16b3 seems to be the best post 1.02 fw I've used so far.  If you haven't tried it you might want to give it a go before declaring the 4500 to be a total loss and give up on it.  If you're still on 1.02 don't you dare flash to anything yet.

Thanks for the post, and I agree.

I have read much that makes post v1.02 sound fine, but ... so many more posts of folks having issues, that I've decided to just keep the current firmware, till either I replace the router, or something is released without all the issues.
Logged
My D-Link Hardware:
DIR-825 HW:B1 FW:2.02NA || DIR-825 HW:A1 FW:1.01 || DGS-1016D HW:C1 || DGL-4500 HW:A1 FW:1.02
DGL-4300 HW:A4 FW:1.9 || DGS-2205 || DGL-4300 HW:A2 FW:1.9 || DGL-4300 HW:A1 FW:1.9

rc_bad8082

  • Level 1 Member
  • *
  • Posts: 6
Re: Is firmware v1.15 stable?
« Reply #33 on: April 20, 2009, 11:25:55 AM »
I'm on 1.15 as well and experiencing the same things mine freezes up every couple of minutes and then goes into restarts after I unplug it for 10 seconds mainly when I try to play Xbox live but more or less randomly. If I cycle it on and off sometimes I can get it to stay up and once I start playing Xbox live I can somewhat lock it online until I quit then it goes back to the same old same old. I wish Lycan would trade me a router because it is quiet frustrating to be bumped offline so much so often. Every f/w since 1.02 has done it and even at 1.02 it wasn’t bad but still restarted randomly at least then it was bearable.
Logged

Abiosis

  • Level 1 Member
  • *
  • Posts: 6
  • Wrath Soul
Re: Is firmware v1.15 stable?
« Reply #34 on: April 21, 2009, 01:33:04 PM »
I bought mine (DGL4500)back in Jan,2009...

I'm still using FW1.02 without any problems by far...

as long as I tell,not more than 5 times it resets itself in totally 4 months usage...

I would like to try the newest FW releases ...but with a router that cost well over US$150+,

I expect it's stable and reliable~~

I'm not gonna take the chance if it may screw thing up since I can't go back to default FW (FW1.02) if that's the case...
 
~Peace~
Logged
Pages: 1 2 [3]
« previous next »