• April 23, 2024, 12:11:05 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Problem with my DAP-1360 F1  (Read 4088 times)

memo mido

  • Level 1 Member
  • *
  • Posts: 1
Problem with my DAP-1360 F1
« on: June 27, 2014, 09:10:32 AM »

i have a DAP-1360 i want to use it as a Repeater (range extender)
with my mi fi ( HuaWei e5776 ) 4g
i had no problem with the configuration

link
http://www.era.la/wp-content/uploads/2013/05/Huawei-E5776-LTE-150Mbps-Mobile-WiFi-Modem.jpg

setting ( HuaWei e5776 ) 4g

802.11 authentication: wpa/wpa2-psk
Encryption mode : aes+tkip
SSID Broadcast: Enable
Country/Region: qatar
Channel: auto
802.11 Mode: 802.11b/g/n
AP isolation: off
WLAN auto off: Enable   (Without external power)
WLAN off time (Min): 10
Wi-Fi bandwidth 20m
my router has 192.168.1.1 as default ip
DHCP server: Enable

-------------------------------------
DAP-1360 i want to use it as a Repeater (range extender)

Hardware Version: F1
Firmware Version: 6.00

------------------------------
i installed it in a good place so i finally have access to wifi ! in area where i couldn't reach the signal with my old router ( HuaWei e5776 ) 4g

i got connected, with Good signal strength.  but NO internet !!

The solutions do not Is there a device works well

would you please help me !!!

thanks in advance
« Last Edit: June 27, 2014, 09:19:07 AM by memo mido »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Problem with my DAP-1360 F1
« Reply #1 on: June 27, 2014, 09:23:08 AM »

Link>Welcome!

Can you temporarily change the host routers WiFi security to disabled then test again to see if you can get Internet thru the DAP after it's reconnected to the main host router?

Then turn WiFi security back on the host router and set to WPA/TPIK only then test WPA2 only and Mixed TPIK and AES.

  • Any other WiFi routers in the area? Link> Use InSSIDer to find out. How many?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.