D-Link Forums
Software => Shareport - Windows => Topic started by: EddieZ on September 25, 2008, 01:19:13 PM
-
Let's hear it about the new gadget.
I can tell you that I installed it on wired and wireless and it works flawlessly with my HP 843C printer. I even tried a Chinese MP3 player and it was detected and directly accessible.
First impression: OK, got to test whether 2 clients can use/connect to the device at the same time though
-
Played with it too, stuck a USB hard drive into the port and was able to use it with the utility running. No issues so far.
-
You can also plug a powered USB hub and connect more than one device to your router. So far it's working great.
Also, you can't have two users connected to the same device at one given time, but it has a nice request feature which shows a message to the existing user.
-
Works without problems with a Samsung CLP 300 color laser printer.
The speed with a USB-storage device is less than 1MB/s, not enough for serious use.
But one can't expect much more from a Homerouter.
Good Job D-Link :)
-
Works without problems with a Samsung CLP 300 color laser printer.
I am about to buy a Samsung CLP-315 and was wondering it would work with the router now the USB utility has arrived. Thanks for the post!
Attention to all posters: Would be nice to summarize which devices/brands/types (printers, USB drives etc) are compatible and which are not. So please name them in your post.
-
I've tried with 4 things and 3 have worked (note that only one pc can use a device at a time!):
1: Microsoft Lifecam VX3000 - NOT WORKING
Computer connects to device just fine. However, whenever any app (Live Messenger, AIM, Skype, Lifecam Console, etc) tries to use it at all, the app freezes for roughly a minute. Then Vista makes the "device disconnected noise", the D-Link tool clears out the list of devices for a few seconds, then loads it again with the camera "waiting for connection" - if I connect again the process repeats. If I don't try to use the camera it stays connected. The problem seems to be with the D-Link driver, since the whole list of devices unloads and reloads after a few seconds. The router does not reboot during this time. Additionally, while the app is frozen if I try to disconnect the webcam from the Shareport utility, it says "disconnect failed" and will not reload the list of devices until I exit and reopen the program.
Lycan! Can you forward this problem to the D-Link engineers? It would be REALLY SWEET if I could use my webcam with the router, because it would be my new home security system!
2: Logitech USB Trackball - WORKING
What can I say, I move it and click and it works :)
3: Canon iP1600 Printer - WORKING
Works great. Takes a while to start printing, but be patient and you will be rewarded!
4: Kingston DataTraveler 2.0 4GB Jumpdrive - WORKING
A bit slow but does not have any issues reading or writing data.
Edit: Lycan! The driver will also intermittently BSOD my XP Pro (32 bit) laptop when it is connected to a device with the SharePoint utility AND I unplug the device from the back of the router without first disconnecting the utility. Another bug to report! Although most users probably wont disconnect stuff once it's hooked up.
-
Edit: Lycan! The driver will also intermittently BSOD my XP Pro (32 bit) laptop when it is connected to a device with the SharePoint utility AND I unplug the device from the back of the router without first disconnecting the utility. Another bug to report! Although most users probably wont disconnect stuff once it's hooked up.
No issue here. Disconnected printer and USB stick while still connected with SharePort. You might want to check your local drivers...?
Running Vista Ultimate x86.
-
No issue here. Disconnected printer and USB stick while still connected with SharePort. You might want to check your local drivers...?
Running Vista Ultimate x86.
It happened maybe once out of 5 times. Definitely D-Link issue, the BSoD referenced a D-Link file "DLinkUDSMbus.sys" or DlinkUDSTcpBus.sys Laptop is rock solid otherwise! I'm a computer tech for a living, so I wouldn't even post if it was potentially something on my laptop.
-
So am I...
Thanks for the extra info. Very useful for the techies @ Dlink
'SMbus' reference does indicate that this might not be a generic issue. Perhaps the laptop brand/type for a heads up?
-
So am I...
Thanks for the extra info. Very useful for the techies @ Dlink
'SMbus' reference does indicate that this might not be a generic issue. Perhaps the laptop brand/type for a heads up?
To be 100% honest, it could have been the D-Link TCP bus driver also, in fact I'm pretty sure it was. I didn't write down the name and just noticed there are actually two drivers there. The other one is "DlinkUDSTcpBus.sys" My event log didn't write any info about it since this laptop is protected with Truecrypt.
For reference, the laptop is an Acer Travelmate 2423WXCI (Travelmate 2420 Series)
I don't care about this bug as much as the webcam problem though, really was amped about possibly using it as my home security system without having to put a pc right next to the door.
-
I attached a USB Hard Drive (Ximeta NDAS + Seagate 7200.11 500GB) - While I can ordinarily get about 18MB/sec from it directly attached to my laptop, it did achieve about 800 KB/sec through the DIR-655.
Honestly I'm shocked we even have this capability at all- it's been a feature I wanted for a very long time since my first DIR-635 router. With time I'm sure the slow performance can be addressed and sped up.
My DNS-323 can get 4.3 MB/sec via SMB and over 12MB/sec via multiple FTPs over wireless- so there is room for improvement here, just depends on how much can be squeezed out of the router hardware.
Wonder if SharePort can be added to the DNS-323? Talk about the holy grail of storage devices.... storage, usb server, network server, print server, UPS-management server (via usb)....
-
I attached a USB Hard Drive (Ximeta NDAS + Seagate 7200.11 500GB) - While I can ordinarily get about 18MB/sec from it directly attached to my laptop, it did achieve about 800 KB/sec through the DIR-655.
Honestly I'm shocked we even have this capability at all- it's been a feature I wanted for a very long time since my first DIR-635 router. With time I'm sure the slow performance can be addressed and sped up.
My DNS-323 can get 4.3 MB/sec via SMB and over 12MB/sec via multiple FTPs over wireless- so there is room for improvement here, just depends on how much can be squeezed out of the router hardware.
Wonder if SharePort can be added to the DNS-323? Talk about the holy grail of storage devices.... storage, usb server, network server, print server, UPS-management server (via usb)....
I wonder: Is the port on the DIR-655 USB 1.x or 2.0? Another question for our connect Lycan :)
-
Just a guess, but when the 655 USB port was designed only to act as WCN port I suppose they used USB 1.0. Putting in a USB 2.0 would be useless...
Looking at the throughput rate with USB HDD this might be te case. If not there is just not enough RAM and/or CPU power to get a decent throughput.
-
Yah, that's what I'm thinking. That could also be why my webcam is unhappy.
Either way, still perfect for printers! I mean, if the router had this before (oh it also does scanning too) I wouldn't have bought my expensive network AiO :)
-
You can also plug a powered USB hub and connect more than one device to your router. So far it's working great.
Also, you can't have two users connected to the same device at one given time, but it has a nice request feature which shows a message to the existing user.
Nice, ordered one right away :-)
Only minor possible 'con' is that the whole hub will be reserved by the single user and still does not allow for seperate use of each device. So we'll put in a request for multiple users (if the access model of SharePort allows that anyway). I assume that Lycan is already taking notes here ;)
-
Nice, ordered one right away :-)
Only minor possible 'con' is that the whole hub will be reserved by the single user and still does not allow for seperate use of each device. So we'll put in a request for multiple users (if the access model of SharePort allows that anyway). I assume that Lycan is already taking notes here ;)
I don't have a real USB hub, but I tested with a hard drive enclosure which gives a pair of extra USB ports. I could connect to the hard drive as well as other devices on the extra USB ports. I could even connect one user to the hard drive and other user to any of the devices on the extra ports.
-
I don't have a real USB hub, but I tested with a hard drive enclosure which gives a pair of extra USB ports. I could connect to the hard drive as well as other devices on the extra USB ports. I could even connect one user to the hard drive and other user to any of the devices on the extra ports.
I guss a USB hub will do the trick too. Same principle. The last thing is good to hear; this will enable my laserprinter, inkjet printer and an USB drive for back-ups, possibly a webcam, and three other device to connect (it's a 7 port hub ;D , I still need to find three usefull devices to fill it up...). Thanks for the feedback.
-
I have wista 32 bit...install and connect without problem. I share my usb WD passport of 320gb but if i try to connect from another computer system not permitted because user not have permission ??
Where is problem ?
Thank
....Resolved a go to tab od WD and put in protection panel user everyone and all now is okay
-
I guss a USB hub will do the trick too. Same principle. The last thing is good to hear; this will enable my laserprinter, inkjet printer and an USB drive for back-ups, possibly a webcam, and three other device to connect (it's a 7 port hub ;D , I still need to find three usefull devices to fill it up...). Thanks for the feedback.
Here's a link to a post I made on DSLR with some pictures, one of them showing 4 devices available and 3 computers using various devices.
http://www.dslreports.com/forum/r21168378-
-
Besides the WD config, you can only access a device from 1 PC. If another PC needs access it needs to be released by that user. They solved that in a good manner at Dlink...but if the requested user is absent from hisd/her machine you've got a problem: it needs to be confirmed.
-
I used an WD 400GB HDD in a Galaxy Metal Gear-USB 2.0/Firewire enclosure.
The Shareport Utility gave me a code 10-Failed to start device message on the USB Mass storage device driver. Before connecting the external drive I did tested it against my desktop using the USB 2.0 ports.
I did successfully connectedand accessed a PNY 128MB flash drive remotely.
Any other details needed? Running 1.21B05 release on the DIR-655.
-
Has anyone had any problems with SharePort working and then suddenly not? It was working just great .. and now the SharePort utility shows nothing. I've reflashed 1.21b5, uninstalled and reinstalled SPUtil, rebooted, powered everything off then back on, changed the usb config to WZC then back to network, tried a known good PNY USB memory stick, disabled my firewall...
The USB light is lit on the router, but it never blinks. When I right-click on the SPUtil tray icon, it no longer displays my router and the connect/disconnect options it used to.
My impression is a setting or something is stuck on the router. I've reset the configuration and set everything up from scratch and it still isn't working. I'll keep at it but I don't know why at this point the USB is not working.
-
Has anyone had any problems with SharePort working and then suddenly not? It was working just great .. and now the SharePort utility shows nothing. I've reflashed 1.21b5, uninstalled and reinstalled SPUtil, rebooted, powered everything off then back on, changed the usb config to WZC then back to network, tried a known good PNY USB memory stick, disabled my firewall...
The USB light is lit on the router, but it never blinks. When I right-click on the SPUtil tray icon, it no longer displays my router and the connect/disconnect options it used to.
My impression is a setting or something is stuck on the router. I've reset the configuration and set everything up from scratch and it still isn't working. I'll keep at it but I don't know why at this point the USB is not working.
You might wanna give some extra info. OS, NIC's. Did you powercycle the router, not only restting it?
You could try removing the utilty completely . So remove all references to drivers in the registry, reboot and all files (manually). Caution: only try this when you really know how to edit the registry
-
Lenovo ThinkPad T61 w/ Vista Business x64 - Intel 4965AGN Wireless. Yes I pulled the power plug from the back of the router. It still isn't working today. When I feel like it I'll try it out wired and on another laptop (ThinkPad R50 w/ XP Pro - Intel 2200BG Wireless).
T61 + Wired = no good
R50 + Wireless/Wired = good
Vista and/or 64-bit problem?
Found the culprit:
I had installed VMWare Server 2.0 yesterday. That effectively broke SharePort. After uninstalling VMWare, SharePort works properly. Reinstall VMWare Server, SharePort breaks again. In prior experience with VMWare and other network-aware applications, I've seen this happen and it is usually due to some nonstandard protocol that doesn't bide well when Virtual NIC hardware is installed. It would probably be advantageous for D-Link to understand this issue; it would most likely enhance SharePort's network resiliency when multiple protocols (not just TCP/IP) are running on one wire(less).
-
I think also that the next release of shareport usb utility must recognized automatically usb attach to the pc when windows start and not connect manually after....
Thank
-
Sometime when i copy or move file of big dimension (like avi) the window of copy/move remain also the copy or move is finished. Infact if i select abort the file copied remain on my HD usb....
Thank
-
I havn't experienced what you experienced with the file copy/move.
I posted this on the other thread, but I think at least with the printer, that if there is a queue built up from other computers while one computer is still printing, that the utility should automatically release the printer so that the other computers can automatically start their print job.
-
Anyone try scanning on a MultiFunction Printer? I can scan, but it only gives me a BMP or JPG option to save a file. I was used to being able to save to PDF with my dlink DPR-1260.
-
You always lose function over the network with a MFP. I'm surprised we can even scan these days.
-
I got a USB hub hooked to the port, and got two HDDs connected. I noticed the request windows also, but when I was attempting to use Logitech webcam 5000 model it would not work. I will play with this thing some more and convince that PC that the webcam is not a scanner. Anyone attempted a flatbed scanner on this port? ;D ???
-
I looked at putting a 663MB file from one of the HDDs on my desktop and I am getting about 3.74MB thoughput. Using Vists 32
-
version 1 of the utility BSODS my vista after a while of running. Not sure why that is?? I'm not using it when it happens it just does it all of a sudden. Didn't think of looking in the event logs though, shame on me. :P But I think it may have to do with powersaving it's the only thing I can think of since i'm using it on a laptop.
-
I try version 1.0...after 0.94 and now after 1..2 hours a window appear with "Login failed", close windows and after again 30 minutes or 1 hour the windows login failed appear again....
What is ?
Thank
-
I looked at putting a 663MB file from one of the HDDs on my desktop and I am getting about 3.74MB thoughput. Using Vists 32
I get a steady 8 MB
-
My experience has not been as good. So far every attempt to install Shareport USB utility has met with BSOD - I have tried three PCs with same result - Vista Business, XP Pro and XP Media Center - point of commonality Trend Micro Internet Security - all three PCs produced BSOD indicatinf Driver_IRQL_NOT_LESS_OR_EQUAL Stop 0x0..D1,0X0...06,0X0...02,0x0...00,0x8BB42599 tmtdi.sys. I am currently uninstalling Trend Micro in favor of CA AV + Anti-Spy and will report back on results
-
Install fails with BSOD if net limiter pro is installed.
Once installed, seems to work fine, though the single user at a time limitation makes this all but worthless for NAS.
Print sharing is a bit more tolerant of the single user limitation and was even able to successfully share a non-networkable USB printer, but it would still be nice if the software would allow all of the users on the network to connect and would negotiate queueing on its own instead of having to ask the remote user to release the device.
-
Install fails with BSOD if net limiter pro is installed.
Once installed, seems to work fine, though the single user at a time limitation makes this all but worthless for NAS.
Print sharing is a bit more tolerant of the single user limitation and was even able to successfully share a non-networkable USB printer, but it would still be nice if the software would allow all of the users on the network to connect and would negotiate queueing on its own instead of having to ask the remote user to release the device.
Good feature request!
-
After uninstalling Trend Micro and replacing with CA AV / Anti-Spyware, everything worked just great. Was able to share my USB HDD and transfer files from the HDD to a PC at rates ~= 36 Mb / sec or about 4.25 MB / sec. Slower than I'd have expected a bit but still better than USB 1.1's max of 12Mb/sec so it is USB 2.0. Not sure where the delay is, although 1 PC on our network still had Jumbo Frames set to 1536 rather than 9014. Fixed but haven't retested since though. Don't expect much of a difference at any rate.
-
I get 9.5 MB/s upload to router/USB HDD (gigabit adapter), but I only get 4.6 MB/s download from USB HDD device.
Or my netmonitor doubles the upload ratio...could be ;)
-
HP 2410 MFP is a no go. I'll try plugging a USB hub into the 655 and then try the printer in the hub!
-
Let's hear it about the new gadget.
I can tell you that I installed it on wired and wireless and it works flawlessly with my HP 843C printer. I even tried a Chinese MP3 player and it was detected and directly accessible.
First impression: OK, got to test whether 2 clients can use/connect to the device at the same time though
Yes, it seem's to function with any problems. I share a Seagate external HD with two desktops and a lap top. So far so good!
-
Installed SharePort USB utility and it works as a charm. No problems at all (knock on wood).
One future request (as all other users seems to request) is that it would be great to be able to share the USB to more than one user at the time.
-
Hi,
I have started getting these annoing little pop-up boxes fom the share-port software saying that Connection Has Been Lost.... they repeat every so often.
Also, isn't the router supposed to release the connection to a given PC after so many minutes of idle time from that PC ? I thought so, but maybe I am mixed up.
SD1
-
Sometime without problem shareport go in crash:
(http://img296.imageshack.us/img296/5102/progetto1bn9.jpg)
-
I reinstalled the app and no problems anymore. Could have been a driver or windows update that's causing it, I don't know. But its remarkeble that these issues come popping up suddenly after 1 month of no issues.
-
Hi,
Not sure if it matters, but I am only seeing this issue on my wired PC...none of the several wireless pc's show this error.
But yes..thats exactly what I am referring to.... The error messages stacking up over time...
SD1
-
Solution that worked for me:
http://forums.dlink.com/index.php?topic=3249.0
-
Any chance of using this port over WAN or say from Internet. It would be cool to attach a USB Camera on the router and be able to view it from internet.
Cheers
fyl
-
1. If you use WebcamXP you already can with any webcam connected to your PC
but
2. A USB webcam will 99% not work on the router USB port (has something to do with the datastream required)
-
I use without problem this utility...but every time i power-off my computer and after power-up again, i must reselect the USB device and share again the usb device. There is the possibility that the sharing of usb device remain also after reboot ?
Thank
-
No, no automatic connect.
-
I loaded windows XP from scratch tonight on my HP laptop. Same problem. Can't see the IP adress and cannot connect to any USB drives.
I have nothing installed on this laptop except the OS and Shareport.
Can someone post the Windows Firewall settings, what IP range and subnet they are using?
I'm using 192.168.0.2-10 for my DHCP Range. My router is 192.168.0.1.
My Windows Firewall settings are:
Any Computer - C:\Program Files\D-Link\SharePort Network USB Utility\SharePort Network USB Utility.exe
Any Computer - SharePort Network USB Utility UDP Port - UDP 9303
I took a look at the Windows Installer package tonight for the Shareport 1.0 utility. There's not much in there. Just some registry entries, a custom action that installs the *.sys files, the 32 and 64 bit files, and some shortcuts. If anyone wants the guts of their install extracted, I can send it to you offline.
I also looked at SharePort Network USB Utility.exe with Dependency Walker. It's pretty clean. Only two errors to an *.enu file and a *.en file that look pretty minor.
I'd appreciate any help that anyone can give. I've got a clean XP install. I'd like to make Shareport work.
Thanks!
-Aaron
-
- Make sure you have firmware 1.21. Earlier version do not suport Shareport.
Also use self powered USB HDD. If you use an extra hub this one also needs to be self powered. - Make sure you hava UPnp enabled in Windows & on the router and Shareport runs with admin priviliges when it is installed. Shareport creates it's own entries in the Windows Firewall.
- Check if you have a second firewall enabled, some AV packages also include a firewall that need manual override.
- Check if Windows Defender does not block the execution of the installed drivers (.sys) files.
-
I have random BSOD on my winXP machine. No problems with vista laptop.
since 4th of january I have 4 BSOD with minidumps. Reading it turns out the following:
*** WARNING: Unable to verify timestamp for DlinkUDSMBus.sys
*** ERROR: Module load completed but symbols could not be loaded for DlinkUDSMBus.sys
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPoolCodeStart
unable to get nt!MmPoolCodeEnd
Cannot get _POOL_TRACKER_BIG_PAGES type size
Probably caused by : DlinkUDSMBus.sys ( DlinkUDSMBus+5323 )
I did not unplug and plugin anything. just happens out of the blue.
-
I have random BSOD on my winXP machine. No problems with vista laptop.
since 4th of january I have 4 BSOD with minidumps. Reading it turns out the following:
*** WARNING: Unable to verify timestamp for DlinkUDSMBus.sys
*** ERROR: Module load completed but symbols could not be loaded for DlinkUDSMBus.sys
unable to get nt!MmSpecialPoolStart
unable to get nt!MmSpecialPoolEnd
unable to get nt!MmPoolCodeStart
unable to get nt!MmPoolCodeEnd
Cannot get _POOL_TRACKER_BIG_PAGES type size
Probably caused by : DlinkUDSMBus.sys ( DlinkUDSMBus+5323 )
I did not unplug and plugin anything. just happens out of the blue.
This is purely a Windows issue.
The error (symbols) is not important, that's a debugging error since the debug symbols and tools are not automatically installed in Windows. More info: http://www.windowsbbs.com/general-discussions/33471-dump-data-collection-tool-instructions.html
I think this might be a RAM issue (defective or overclocked) or a power supply issue (not enough/unstable watts or amps) or a conflict with another loaded driver. Could be a hardware driver, but also Antivirus drivers are reputed to interfere a quite lot with installed networking devices.
There's not enough info to go looking for the error. In order to do so we realy need the debugging logs.
-
Hey EddieZ,
If you tell me how to make the debugging logs then I will do so.
Though I find it strange that you refer to it as a windows problem although the dumpfile clearly references the DlinkUDSMBus.sys.
-
I managed to make a debugfile.
It is in the attachment. Would be really nice when you could take a look at it.
edit: was not able to upload the attachment: "The attachments upload directory is not writable. Your attachment or avatar cannot be saved."
Here it is pasted:
Opened log file 'c:\debuglog.txt'
Microsoft (R) Windows Debugger Version 6.10.0003.233 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini011809-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\WINDOWS;C:\WINDOWS\system32;C:\WINDOWS\system32\drivers
Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp3_gdr.080814-1236
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
Debug session time: Sun Jan 18 12:34:57.318 2009 (GMT+1)
System Uptime: 0 days 13:51:20.849
Loading Kernel Symbols
...............................................................
.....................................................
Loading User Symbols
Loading unloaded module list
................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck C2, {7, cd4, 2030001, 88da9d48}
*** ERROR: Module load completed but symbols could not be loaded for DlinkUDSMBus.sys
Probably caused by : DlinkUDSMBus.sys ( DlinkUDSMBus+5323 )
Followup: MachineOwner
---------
2: kd> !analyze -v;r;kv;lmtn;.logclose;q
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 00000007, Attempt to free pool which was already freed
Arg2: 00000cd4, (reserved)
Arg3: 02030001, Memory contents of the pool block
Arg4: 88da9d48, Address of the block of pool being deallocated
Debugging Details:
------------------
POOL_ADDRESS: 88da9d48
BUGCHECK_STR: 0xc2_7
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
PROCESS_NAME: SharePort Netwo
LAST_CONTROL_TRANSFER: from 80551fc5 to 8053767a
STACK_TEXT:
b6019bb4 80551fc5 000000c2 00000007 00000cd4 nt!KeBugCheckEx+0x1b
b6019c04 805513e3 88da9d48 00000000 b6019c4c nt!ExFreePoolWithTag+0x2c1
b6019c14 b9ef9323 88da9d48 8a3421c8 889b2008 nt!ExFreePool+0xf
WARNING: Stack unwind information not available. Following frames may be wrong.
b6019c4c b9efc86a 8a23fe30 889b4008 805512fa DlinkUDSMBus+0x5323
b6019c68 b9ef5c94 8a23fe30 889b4008 889b409c DlinkUDSMBus+0x886a
b6019c7c 804e13d9 8a23fe30 889b4008 80702410 DlinkUDSMBus+0x1c94
b6019c8c 8057087c 889b409c 889b4008 88da18b8 nt!IopfCallDriver+0x31
b6019ca0 8057eb1f 8a23fe30 889b4008 88da18b8 nt!IopSynchronousServiceTail+0x70
b6019d38 804dd99f 000000c0 000001f0 00000000 nt!NtReadFile+0x55d
b6019d38 7c90e4f4 000000c0 000001f0 00000000 nt!KiFastCallEntry+0xfc
00fbfec4 00000000 00000000 00000000 00000000 0x7c90e4f4
STACK_COMMAND: kb
FOLLOWUP_IP:
DlinkUDSMBus+5323
b9ef9323 eb05 jmp DlinkUDSMBus+0x532a (b9ef932a)
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: DlinkUDSMBus+5323
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: DlinkUDSMBus
IMAGE_NAME: DlinkUDSMBus.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 48d889e3
FAILURE_BUCKET_ID: 0xc2_7_DlinkUDSMBus+5323
BUCKET_ID: 0xc2_7_DlinkUDSMBus+5323
Followup: MachineOwner
---------
eax=f772713c ebx=00000cd4 ecx=00000000 edx=efb70002 esi=88da9d40 edi=88da18b8
eip=8053767a esp=b6019b9c ebp=b6019bb4 iopl=0 nv up ei ng nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00000286
nt!KeBugCheckEx+0x1b:
8053767a 5d pop ebp
ChildEBP RetAddr Args to Child
b6019bb4 80551fc5 000000c2 00000007 00000cd4 nt!KeBugCheckEx+0x1b (FPO: [5,0,0])
b6019c04 805513e3 88da9d48 00000000 b6019c4c nt!ExFreePoolWithTag+0x2c1 (FPO: [2,10,4])
b6019c14 b9ef9323 88da9d48 8a3421c8 889b2008 nt!ExFreePool+0xf (FPO: [1,0,0])
WARNING: Stack unwind information not available. Following frames may be wrong.
b6019c4c b9efc86a 8a23fe30 889b4008 805512fa DlinkUDSMBus+0x5323
b6019c68 b9ef5c94 8a23fe30 889b4008 889b409c DlinkUDSMBus+0x886a
b6019c7c 804e13d9 8a23fe30 889b4008 80702410 DlinkUDSMBus+0x1c94
b6019c8c 8057087c 889b409c 889b4008 88da18b8 nt!IopfCallDriver+0x31 (FPO: [0,0,0])
b6019ca0 8057eb1f 8a23fe30 889b4008 88da18b8 nt!IopSynchronousServiceTail+0x70 (FPO: [7,0,4])
b6019d38 804dd99f 000000c0 000001f0 00000000 nt!NtReadFile+0x55d (FPO: [Non-Fpo])
b6019d38 7c90e4f4 000000c0 000001f0 00000000 nt!KiFastCallEntry+0xfc (FPO: [0,0] TrapFrame @ b6019d64)
00fbfec4 00000000 00000000 00000000 00000000 0x7c90e4f4
start end module name
804d7000 80700000 nt ntkrnlmp.exe Thu Aug 14 12:09:14 2008 (48A4044A)
80700000 80720d00 hal halmacpi.dll Sun Apr 13 20:31:27 2008 (4802517F)
b5055000 b507f180 kmixer kmixer.sys Sun Apr 13 20:45:07 2008 (480254B3)
b5dc2000 b5dd9d80 DlinkUDSTcpBus DlinkUDSTcpBus.sys Tue Sep 23 08:17:01 2008 (48D889DD)
b6546000 b6597880 srv srv.sys Thu Dec 11 11:57:07 2008 (4940F203)
b6660000 b66a0a80 HTTP HTTP.sys Sun Apr 13 20:53:48 2008 (480256BC)
b6769000 b67b6000 eamon eamon.sys Tue Jun 10 18:42:22 2008 (484EAEEE)
b67de000 b680a180 mrxdav mrxdav.sys Sun Apr 13 20:32:42 2008 (480251CA)
b6973000 b6987480 wdmaud wdmaud.sys Sun Apr 13 21:17:18 2008 (48025C3E)
b6ac8000 b6ad6d80 sysaudio sysaudio.sys Sun Apr 13 21:15:55 2008 (48025BEB)
b6c98000 b6c9b900 ndisuio ndisuio.sys Sun Apr 13 20:55:57 2008 (4802573D)
b7038000 b704f900 dump_atapi dump_atapi.sys Sun Apr 13 20:40:29 2008 (4802539D)
b7118000 b7187280 mrxsmb mrxsmb.sys Fri Oct 24 13:21:07 2008 (4901AFA3)
b7188000 b71b2e80 rdbss rdbss.sys Sun Apr 13 21:28:38 2008 (48025EE6)
b71b3000 b71d4d00 afd afd.sys Thu Aug 14 12:04:35 2008 (48A40333)
b71d5000 b71fa500 ipnat ipnat.sys Sun Apr 13 20:57:10 2008 (48025786)
b71fb000 b7222c00 netbt netbt.sys Sun Apr 13 21:20:59 2008 (48025D1B)
b7223000 b727b480 tcpip tcpip.sys Fri Jun 20 13:51:09 2008 (485B99AD)
b727c000 b728e600 ipsec ipsec.sys Sun Apr 13 21:19:42 2008 (48025CCE)
b72b7000 b72b9900 Dxapi Dxapi.sys Fri Aug 17 22:53:19 2001 (3B7D843F)
b72e3000 b72e6000 mouhid mouhid.sys Fri Aug 17 22:47:57 2001 (3B7D82FD)
b72e7000 b72ea980 kbdhid kbdhid.sys Sun Apr 13 20:39:47 2008 (48025373)
b72ff000 b7322a80 portcls portcls.sys Sun Apr 13 21:19:40 2008 (48025CCC)
b7323000 b77ac000 RtkHDAud RtkHDAud.sys Tue Aug 28 10:55:04 2007 (46D3E2E8)
b9d76000 b9dd3f00 update update.sys Sun Apr 13 20:39:46 2008 (48025372)
b9e14000 b9e23900 Cdfs Cdfs.SYS Sun Apr 13 21:14:21 2008 (48025B8D)
b9e64000 b9e6d000 HIDCLASS HIDCLASS.SYS Sun Apr 13 20:45:25 2008 (480254C5)
b9e74000 b9e76880 hidusb hidusb.sys Sun Apr 13 20:45:27 2008 (480254C7)
b9e94000 b9e97b00 usbscan usbscan.sys Sun Apr 13 20:45:34 2008 (480254CE)
b9e9c000 b9ecbe80 rdpdr rdpdr.sys Sun Apr 13 20:32:50 2008 (480251D2)
b9ecc000 b9edce00 psched psched.sys Sun Apr 13 20:56:36 2008 (48025764)
b9edd000 b9ef3580 ndiswan ndiswan.sys Sun Apr 13 21:20:41 2008 (48025D09)
b9ef4000 b9f06380 DlinkUDSMBus DlinkUDSMBus.sys Tue Sep 23 08:17:07 2008 (48D889E3)
b9f07000 b9fdfd00 NVNRM NVNRM.SYS Fri Sep 21 04:07:31 2007 (46F32763)
b9fe0000 b9ff3f00 VIDEOPRT VIDEOPRT.SYS Sun Apr 13 20:44:39 2008 (48025497)
b9ff4000 ba5cd360 nv4_mini nv4_mini.sys Wed Sep 17 19:44:45 2008 (48D1420D)
ba5ce000 ba5f6000 HDAudBus HDAudBus.sys Thu May 26 17:46:29 2005 (4295EF55)
ba5f6000 ba618700 ks ks.sys Sun Apr 13 21:16:34 2008 (48025C12)
ba619000 ba63c200 USBPORT USBPORT.SYS Sun Apr 13 20:45:34 2008 (480254CE)
ba6da000 ba6dab80 Null Null.SYS Fri Aug 17 22:47:39 2001 (3B7D82EB)
bac50000 bac55c00 mouclass mouclass.sys Sun Apr 13 20:39:47 2008 (48025373)
bac58000 bac5e200 kbdclass kbdclass.sys Sun Apr 13 20:39:46 2008 (48025372)
bac60000 bac64080 raspti raspti.sys Fri Aug 17 22:55:32 2001 (3B7D84C4)
bac68000 bac6c580 ptilink ptilink.sys Fri Aug 17 22:49:53 2001 (3B7D8371)
bac70000 bac74a80 TDI TDI.SYS Sun Apr 13 21:00:04 2008 (48025834)
baf06000 baf12880 rasl2tp rasl2tp.sys Sun Apr 13 21:19:43 2008 (48025CCF)
baf16000 baf20000 nvnetbus nvnetbus.sys Fri Sep 21 04:07:39 2007 (46F3276B)
baf26000 baf34300 redbook redbook.sys Sun Apr 13 20:40:27 2008 (4802539B)
baf36000 baf45600 cdrom cdrom.sys Sun Apr 13 20:40:45 2008 (480253AD)
baf46000 baf50480 imapi imapi.sys Sun Apr 13 20:40:57 2008 (480253B9)
baf56000 baf66000 serial serial.sys Sun Apr 13 21:15:44 2008 (48025BE0)
baf66000 baf6fe00 intelppm intelppm.sys Sun Apr 13 20:31:31 2008 (48025183)
baf86000 baf95000 easdrv easdrv.sys Tue Jun 10 18:43:24 2008 (484EAF2C)
bafaa000 bafadc80 mssmbios mssmbios.sys Sun Apr 13 20:36:45 2008 (480252BD)
bafc2000 bafc4780 ndistapi ndistapi.sys Sun Apr 13 20:57:27 2008 (48025797)
bafd2000 bafd4f00 nvsmu nvsmu.sys Sun Jul 08 00:13:09 2007 (46900FF5)
bafd6000 bafd9d80 serenum serenum.sys Sun Apr 13 20:40:12 2008 (4802538C)
bafea000 bafec280 rasacd rasacd.sys Fri Aug 17 22:55:39 2001 (3B7D84CB)
bf800000 bf9c2d00 win32k win32k.sys Mon Sep 15 14:12:42 2008 (48CE513A)
bf9c3000 bf9d4600 dxg dxg.sys Sun Apr 13 20:38:27 2008 (48025323)
bf9d5000 bff9be00 nv4_disp nv4_disp.dll Wed Sep 17 19:38:33 2008 (48D14099)
bff9c000 bff9ef00 TSDDD TSDDD.dll Mon Apr 14 19:02:15 2008 (48038E17)
f7409000 f7422b80 Mup Mup.sys Sun Apr 13 21:17:05 2008 (48025C31)
f7423000 f744f980 NDIS NDIS.sys Sun Apr 13 21:20:35 2008 (48025D03)
f7450000 f7466880 KSecDD KSecDD.sys Sun Apr 13 20:31:40 2008 (4802518C)
f7467000 f7478f00 sr sr.sys Sun Apr 13 20:36:50 2008 (480252C2)
f7479000 f7498b00 fltmgr fltmgr.sys Sun Apr 13 20:32:58 2008 (480251DA)
f7499000 f74b0900 atapi atapi.sys Sun Apr 13 20:40:29 2008 (4802539D)
f74b1000 f74d6900 dmio dmio.sys Sun Apr 13 20:44:45 2008 (4802549D)
f74d7000 f74f5b00 ftdisk ftdisk.sys Fri Aug 17 22:52:41 2001 (3B7D8419)
f7526000 f7530e80 Fips Fips.SYS Sun Apr 13 20:33:27 2008 (480251F7)
f7536000 f753e780 netbios netbios.sys Sun Apr 13 20:56:01 2008 (48025741)
f7546000 f7552000 epfwtdir epfwtdir.sys Tue Jun 10 18:31:22 2008 (484EAC5A)
f7556000 f755e700 wanarp wanarp.sys Sun Apr 13 20:57:20 2008 (48025790)
f7576000 f7584b00 drmk drmk.sys Sun Apr 13 20:45:12 2008 (480254B8)
f7596000 f75a6a80 pci pci.sys Sun Apr 13 20:36:43 2008 (480252BB)
f75a7000 f75d5080 ACPI ACPI.sys Sun Apr 13 20:36:33 2008 (480252B1)
f75f7000 f7600380 isapnp isapnp.sys Sun Apr 13 20:36:40 2008 (480252B8)
f7607000 f7611580 MountMgr MountMgr.sys Sun Apr 13 20:39:45 2008 (48025371)
f7617000 f7624100 VolSnap VolSnap.sys Sun Apr 13 20:41:00 2008 (480253BC)
f7627000 f762fe00 disk disk.sys Sun Apr 13 20:40:46 2008 (480253AE)
f7637000 f7643180 CLASSPNP CLASSPNP.SYS Sun Apr 13 21:16:21 2008 (48025C05)
f7667000 f7671200 raspppoe raspppoe.sys Sun Apr 13 20:57:31 2008 (4802579B)
f7677000 f7682d00 raspptp raspptp.sys Sun Apr 13 21:19:47 2008 (48025CD3)
f7687000 f768f900 msgpc msgpc.sys Sun Apr 13 20:56:32 2008 (48025760)
f7697000 f76a0f00 termdd termdd.sys Sun Apr 13 20:38:36 2008 (4802532C)
f76a7000 f76b4180 NVENETFD NVENETFD.sys Fri Sep 21 04:07:37 2007 (46F32769)
f76b7000 f76c0e80 NDProxy NDProxy.SYS Sun Apr 13 20:57:28 2008 (48025798)
f76d7000 f76e5880 usbhub usbhub.sys Sun Apr 13 20:45:36 2008 (480254D0)
f7707000 f770d180 PCIIDEX PCIIDEX.SYS Sun Apr 13 20:40:29 2008 (4802539D)
f770f000 f7713d00 PartMgr PartMgr.sys Sun Apr 13 20:40:48 2008 (480253B0)
f7717000 f771bde0 PxHelp20 PxHelp20.sys Wed Jan 12 20:55:13 2005 (41E580A1)
f7737000 f773c200 RTL8139 RTL8139.SYS Fri Jun 13 07:29:46 2003 (3EE9614A)
f776f000 f7775180 HIDPARSE HIDPARSE.SYS Sun Apr 13 20:45:22 2008 (480254C2)
f7777000 f777c200 vga vga.sys Sun Apr 13 20:44:40 2008 (48025498)
f777f000 f7783a80 Msfs Msfs.SYS Sun Apr 13 20:32:38 2008 (480251C6)
f7787000 f778e880 Npfs Npfs.SYS Sun Apr 13 20:32:38 2008 (480251C6)
f778f000 f7796d80 usbccgp usbccgp.sys Sun Apr 13 20:45:38 2008 (480254D2)
f7797000 f779d700 USBSTOR USBSTOR.SYS Sun Apr 13 20:45:37 2008 (480254D1)
f77b7000 f77bb500 watchdog watchdog.sys Sun Apr 13 20:44:59 2008 (480254AB)
f7817000 f781b300 usbohci usbohci.sys Sun Apr 13 20:45:34 2008 (480254CE)
f781f000 f7826600 usbehci usbehci.sys Sun Apr 13 20:45:34 2008 (480254CE)
f7897000 f789a000 BOOTVID BOOTVID.dll Fri Aug 17 22:49:09 2001 (3B7D8345)
f7987000 f7988b80 kdcom kdcom.dll Fri Aug 17 22:49:10 2001 (3B7D8346)
f7989000 f798a100 WMILIB WMILIB.SYS Fri Aug 17 23:07:23 2001 (3B7D878B)
f798b000 f798c700 dmload dmload.sys Fri Aug 17 22:58:15 2001 (3B7D8567)
f79a1000 f79a2100 swenum swenum.sys Sun Apr 13 20:39:52 2008 (48025378)
f79a5000 f79a6280 USBD USBD.SYS Fri Aug 17 23:02:58 2001 (3B7D8682)
f79b3000 f79b4f00 Fs_Rec Fs_Rec.SYS Fri Aug 17 22:49:37 2001 (3B7D8361)
f79b5000 f79b6080 Beep Beep.SYS Fri Aug 17 22:47:33 2001 (3B7D82E5)
f79b7000 f79b8080 mnmdd mnmdd.SYS Fri Aug 17 22:57:28 2001 (3B7D8538)
f79b9000 f79ba080 RDPCDD RDPCDD.sys Fri Aug 17 22:46:56 2001 (3B7D82C0)
f79cf000 f79d0100 dump_WMILIB dump_WMILIB.SYS Fri Aug 17 23:07:23 2001 (3B7D878B)
f7a4f000 f7a4fd00 pciide pciide.sys Fri Aug 17 22:51:49 2001 (3B7D83E5)
f7a9f000 f7a9fc00 audstub audstub.sys Fri Aug 17 22:59:40 2001 (3B7D85BC)
f7aba000 f7abad00 dxgthk dxgthk.sys Fri Aug 17 22:53:12 2001 (3B7D8438)
f7b52000 f7bde600 Ntfs Ntfs.sys Sun Apr 13 21:15:49 2008 (48025BE5)
Unloaded modules:
b5c54000 b5c7f000 kmixer.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b5c54000 b5c7f000 kmixer.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b5ccf000 b5cfa000 kmixer.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b6925000 b6950000 kmixer.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b77c7000 b77c8000 drmkaud.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b6aa8000 b6ab5000 DMusic.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b6950000 b6973000 aec.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b6ab8000 b6ac6000 swmidi.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f798d000 f798f000 splitter.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
b67a2000 b67b6000 Parport.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
bafee000 baff2000 kbdhid.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
f7566000 f7574000 i8042prt.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
f7767000 f776c000 Cdaudio.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
baff2000 baff5000 Sfloppy.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
bac28000 bac2d000 Flpydisk.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
bac30000 bac37000 Fdc.SYS
Timestamp: unavailable (00000000)
Checksum: 00000000
Closing open log file c:\debuglog.txt
-
The reason why this is a Windows issue is because Windows tends to have regular problems with .sys drivers. If it was a generic Shareport driver issue then Windows should react accordingly on all installed platforms. And that is does not do. You are activating the Dlink driver and that causes a conflict in Windows. This cause a driver issue: the driver may try to occupy a memoryspace that is corrupted on the RAM module or it just conflicts with another driver that is installed.
This is the essence of the error that everybody can understand: "Typically this is at a bad IRQL level or double freeing the same allocation"
Looking at the error log, you could try updating the Intel chipset driver. You can find it here: www.statio-drivers.co.
You also could do a Memtest to see if your RAM is still 100% OK.
-
Ah I get your explanation about the windows issue..
I bought this pc a few months ago so I doubt there is a problem with the ram, I will give updating the intel chipset drivers ago.
THough I have to say that the problems started after installing the shareport program, so in essence I would say that is the base of the problem, since no other programs or drivers have problems with it.
-
Ah I get your explanation about the windows issue..
I bought this pc a few months ago so I doubt there is a problem with the ram, I will give updating the intel chipset drivers ago.
THough I have to say that the problems started after installing the shareport program, so in essence I would say that is the base of the problem, since no other programs or drivers have problems with it.
Even brand new RAM can be faulty, so there's no golden rule to hang on to.
You could also try deinstalling the Shareport app and manually delete the 2 Dlink .sys files in c:\windows\system32\drivers
And reinstall.
This is the Microsoft explaination. IMHO, the Dlink driver is only the 'catalyst'.
"This problem may occur when you have NetBIOS transport enabled. In a bug that exists in Netbt.sys, a Unicode string is initialized to a static string and then freed inside the NbtReadSingleParameter function. The BAD_POOL_CALLER (C2) error indicates that the current thread is making a bad pool request. Typically, this request occurs at an incorrect interrupt request (IRQ) level, or it is caused by the freeing of a memory allocation that has already been freed."
-
Allright,
I updated the chipset, uninstalled the program, installed a new version (ftp://ftp.dlink.com/Gateway/dir655/Apps/SharePort_Network_USB_Utility_114.zip)..
Let see what happens in the next week :)
thnx for the support EddieZ
-
NO problem, I hope this will solve it for you.
Had not yet seen the new version, thanks for that.
-
the new version seems to work okay..
It is messy though with translation. I'm dutch and getting some Italian passed on the way :)
-
Already gave the guys at Dlink tech a heads up on that, altough it really does not ruin my day. :)
-
n00p mine either.. though it just looks more professional when its correct..
thanks for passing it on.
-
I'm having trouble with newest version of Shareport:
Wireless laptop running Vista Home Premium x86 sees it and can connect (to an Epson R340 printer).
Wired desktop running Server 2003 x86 sees nothing.
Also tested other devices with same result.
I've uninstalled/reinstalled twice, deleted fragments, rebooted, etc, to no avail.
Suggestions?
-
Windows 2003 firewall (or 3rd party) ? Got VM installed?
The solution is within the OS.
-
Hello Eddie,
I should have mentioned that the router name and IP don't appear at the top of my Shareport menu.
I agree that the solution is in the OS, but do you have any suggestions? I originally installed with Windows Firewall turned off, but then I uninstalled, looked for fragment .sys files (there weren't any), turned on Windows Firewall, reinstalled Shareport (and noticed the exceptions it added and made sure they were "checked"). Still no luck. There is nothing else installed, even AV. The OS install is clean, also.
I compared registries between the Server 2003 machine that doesn't work and my Vista Premium machine that does work, but nothing really jumped out at me.
I searched a bit more through the forums, and noticed that someone else had the same problem as I do (with the router and IP not showing up, and Sharepoint not working) - it was mentioned to them that "something was blocking Sharepoint... etc", but I just don't know what that could be. I don't think their issue was ever resolved, either.
Thanks for any help or insight you or others might offer, as I'm out of ideas.
-
I have experienced this behaviour when resuming from sleep mode. Exiting Shareport and enabling wireless again (and restarting Shareport) solves it every time. So I'm convived it has something to do with the wireless connection in Windows.
-
In that case, I have a different problem - as I noted above, the problem exists only on my wired Server 2003 Standard PC, independent of my wireless laptop (and whether it is turned on or not).
So to reiterate, I can turn on the wired Server 2003 PC and SP will not function. I can disable, re-enable, turn it upside down and shake it all I like, but I still never see the name and IP on the right-click menu of the wired PC.
But as soon as I turn on my wireless laptop, BAM, it's there - but only on the wireless laptop.
I'm going to call D-link tech support and see if they have any suggestions. Lycan, do you have a minute or sixty to look at this?
I should also mention that I don't use sleep mode at all.
-
That it occurs with my wireless network doesn't mean I can not occur with wired networks. That would indicate a general network (driver) issue. Perhaps a driver (re-)load sequence that is messing with the Shareport driver (which needs a network driver to be loaded to effectuate the connection part that is missing from your right click view).
Tried reinstalling your NIC and Shareport afterwards?
-
Eddie,
A good suggestion, but no luck here. I even made sure I have the latest network driver (I do). I uninstalled SP, rebooted, uninstalled network, rebooted, reinstalled network, rebooted, then reinstalled SP. No joy.
Does anyone know if it relies on a particular setting within the 655's configuration? Like the other poster with this problem, the only relevant setting I can find (Setup -> USB Settings) is set to "Network USB" with a "Network USB Detection" interval of 30 seconds.
Also, I have an A4, if that means anything to anyone.
Does this bad boy rely on any specific Windows services that I should make sure are running?
-
This are the registry entries,
you might want to export (because of the format) the ones you have a do a comparison:
DlinkUDSMBus
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DlinkUDSMBus]
"ImagePath"=hex(2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
72,00,69,00,76,00,65,00,72,00,73,00,5c,00,44,00,6c,00,69,00,6e,00,6b,00,55,\
00,44,00,53,00,4d,00,42,00,75,00,73,00,2e,00,73,00,79,00,73,00,00,00
"Group"="Base"
"DisplayName"="UDS Master Bus of Kernel USB Software Bus by TCP"
"ErrorControl"=dword:00000001
"Start"=dword:00000003
"Tag"=dword:00000018
"Type"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DlinkUDSMBus\Enum]
"0"="Root\\Kernel\\0104"
"Count"=dword:00000001
"NextInstance"=dword:00000001
DlinkUDSTcpBus
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DlinkUDSTcpBus]
"Tag"=dword:00000018
"Start"=dword:00000003
"ImagePath"=hex(2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
72,00,69,00,76,00,65,00,72,00,73,00,5c,00,44,00,6c,00,69,00,6e,00,6b,00,55,\
00,44,00,53,00,54,00,63,00,70,00,42,00,75,00,73,00,2e,00,73,00,79,00,73,00,\
00,00
"Type"=dword:00000001
"ErrorControl"=dword:00000001
"DisplayName"="DlinkUDSTcpBus"
"Group"="Base"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DlinkUDSTcpBus\Enum]
"Count"=dword:00000001
"NextInstance"=dword:00000001
"0"="USB\\Vid_1597&Pid_1001&Rev_0000\\0100a8c04e25"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DlinkUDSTcpBus\Security]
"Security"=hex:01,00,14,80,90,00,00,00,9c,00,00,00,14,00,00,00,30,00,00,00,02,\
00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
00,00,02,00,60,00,04,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,\
05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,\
20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,0b,00,00,00,00,\
00,18,00,fd,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,23,02,00,00,01,01,\
00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00
-
Aack, I combed through it line by line. My registry export is identical with one exception:
The keys are in a slightly different order here. But that doesn't matter, does it?
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DlinkUDSMBus]
"DisplayName"="UDS Master Bus of Kernel USB Software Bus by TCP"
"ErrorControl"=dword:00000001
"Start"=dword:00000003
"Type"=dword:00000001
"ImagePath"=hex(2):53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
72,00,69,00,76,00,65,00,72,00,73,00,5c,00,44,00,6c,00,69,00,6e,00,6b,00,55,\
00,44,00,53,00,4d,00,42,00,75,00,73,00,2e,00,73,00,79,00,73,00,00,00
"Group"="Base"
"Tag"=dword:00000018
-
Should not make a difference.
-
Rats. I thought not.
Anyone else have any ideas?
-
I have exactly the same problem. 1 desktop with XP SP3 wired: SharePort doesn't work.
1 desktop with XP SP3 wireless with DWA 140 adapter: works perfect.
And: 1 laptop wireless with Vista Home premium: also works perfect. I have removed SharePort and installed it again on the wired desktop: same problem. If I want to switch this computer off I get a warning that SharePort is still running and canīt be closed by Windows. I have to choose stop this program immediately to shut off the computer. Anyone an idea??
-
Guessing some kind of driver issue. If you have VMware or other virtualisation package running there are bound te be problems with the drivers.
-
Guessing some kind of driver issue. If you have VMware or other virtualisation package running there are bound te be problems with the drivers.
Hello Edgarz,
Thanks for the quick reaction.
I have checked the PC and removed a lot of stuff. Couldn't find anything like VMware or something like that. Still Shareport doesn't work. At start up of the computer the symbol comes up green during a very short time. If I connect immediately a device from the pop up screens it works. But if I wait a minute the symbol turns red and stays red, and: it is not possible to stop the program. I have to go in task manager to stop it.
Do you have any further suggestions??
-
This is quite a difficult issue because it is caused by a driver conflict in Windows,
Are you sure you don't have any firewall or portblocking applications active? It looks like the connection is being reset after initial contact.
-
I wish I am having a better time with it then what seems you guys and gals seem to be. On all computers that we have it running I find more of the stations going from green to red and back again. But for the most time it stays red. I have a Maxtor 750 Gb USB drive connected to the port. Them some times right it the middle of a tranfer we will find the data only have moved then it flakes out. I sure would like to know what i have overlooked. Anyways that is our experence with it. Anybody want to chime in and all connections are hardwired.
-
All's fine here the last couple of months (wired)
One observation though with the new 1.22beta firmware is that Shareport connection through wireless is disconnected and connected automatically when engaging a printer. No log showng disconnection of any kind...
-
I had a similar problem. I uninstalled 2 Windows Onecare products that I had installed, and everything works perfect now. See http://social.microsoft.com/Forums/en-US/onecarefirewall/thread/5c584426-1fd2-4fe3-a7e1-7917ea1f3d92/ for more details.
-
Hi everyone,
Has anyone tried USB Audio with any success?
I have a creative sound blaster X-fi 5.1 usb sound card and it does not show up in the list of devices to connect to. Is there any update or remedy?
I am actually on DIR-825 and the last firmware (2.05NA i believe).
My other devices connect quiet normally, except that the hard disk transfer rates are not that great (~4MBps).
Thanks,
-
Mine does not work. It prints blank pages, scrambled text and broken images. That was the reason I picked this model, I needed to share a printer with out leaving a computer running all the time.
Does not matter wired computer or wireless, win xp, vista or win 7.
dir655 B1 2.00NA
HL-1440 printer
-
Try updating your printer driver. Or else reinstall it. Looks a printer spooler issue.
-
Hey I installed on windows 7 and it wouldnt detect so i uninstalled and reinstalled and now it wont install porperly so wont open any clues a s to why it wont install properly ?
-
There is a dedicated Shareport thread, you may get help with Shareport quicker over there.
-
where should i find this dedicated thread ?
-
Snarky Answer: On the front page of the Main Dlink Forums under the word Shareport.
Linky Answer: (For PC) http://forums.dlink.com/index.php?board=252.0 (http://forums.dlink.com/index.php?board=252.0)
-
for those who can't detect any devices connected in the usb port using shareport versions 3.1, 1.15 and 1.17, use the 1.17b01 setup. I am using a dir-655 with 2.00 rev B and it worked for me. Max length of usb cable you can use is 5meters. I tried it with a flash drive using a USB male to female + the flash drive and it works fine. But using an external HDD does not work because the configuration would be USB male to female + usb male to micro usb + external HDD = 5m+ of cable. I have yet to try use a 5m cable for my printer.
I'm using a windows 7 x64
Link for the shareport 1.17b01
http://www.dlink.com.au/tech/Download/download.aspx?product=DIR-655&revision=REV_A&filetype=Firmware (http://www.dlink.com.au/tech/Download/download.aspx?product=DIR-655&revision=REV_A&filetype=Firmware)