D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS ShareCenter Series => Topic started by: jtma67 on January 28, 2018, 10:49:10 PM
-
After Windows 10 performed an update, I couldn't map my DNS-323 NAS drive. Bottom line, here is what I found. The Windows 10 update apparently reset one of the security settings required. The following security check box MUST be CHECKED.
Go to: Control Panel / Programs and Features / Turn Windows features on or off
Insure the box is CHECKED for SMB 1.0/CIFS File Sharing Support. This older drive needs this box CHECKED.
I hope this helps out with your older legacy product NAS product.
-
Thank you for this information. Hope this helps future Windows 10 users.
-
this is temporarily useful but any chance to release a firmware that makes the DNS-323 SMBv2 compatible?
Microsoft deprecated SMBv1 in 2014
-
No chance unfortunately for a new firmware since the DNS-323 was discontinued 5 years ago.
-
The suggestion would also not be temporary. Once enabled on Windows, it's enabled until you disable it. Or if maybe a windows update changes it. ::)
-
Looks like MS is caving in and finally fixing Windows 10 and SMBv1:
https://www.theregister.co.uk/2018/06/27/windows_10_path_chrome_smb1_patch/ (https://www.theregister.co.uk/2018/06/27/windows_10_path_chrome_smb1_patch/)