• October 10, 2024, 12:26:42 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS Network Cameras - How to Install Firmware in My DCS Network Camera  (Read 17582 times)

Kakashi::.

  • Level 3 Member
  • ***
  • Posts: 270

This procedure describes how to install firmware on a D-Link DCS Camera.

DCS-5605 and DCS-5635 and other models

  • Download the firmware file to your PC desktop (from your local D-Link support Site)
  • Using a web browser, enter the IP address of your camera
  • Use a browser to log into the camera web interface
  • Navigate to: MAINTENANCE > Firmware Upgrade (Navigation path may vary on some D-Link camera models)
  • Click Browse... (select the firmware file previously saved to your desktop, the file path will be displayed on the field)
  • Upgrade the firmware by clicking on Upload and wait for the timer to run down.

Notes

  • Please save the Configuration Settings File prior to upgrading firmware.
  • If the firmware file is compressed (e.g. zip extension), un-compress the firmware file prior to upgrading
  • When applicable, Do not upgrade firmware via a wireless connection as a network disruption can render your camera unusable.

Additional Resources

« Last Edit: March 01, 2018, 03:28:21 PM by GreenBay42 »
Logged