D-Link Wireless Access Points For Business > DAP-2690

Forum for DAP-2690 ? Repeated crash.

(1/1)

cleclerc:
Sorry to post on the DAP-2553 forum but I can't find a forum for the DAP-2690.

Is there a place to discuss DAP-2690 issues ?

We face repeated crash of our DAP-2690 access points: no clustering, both 2Ghz and 5Ghz bands enabled, fixed IP, PoE.
They crash almost every day and nothing appear in the logs  :(

Cyrille

FurryNutz:
Try single mode G or mixed G and N on 2.4Ghz and single mode N on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual channel to a open or unused channel.
What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto.

Any other WiFi routers in the area? Use InSSIDer to find out.
Turn off Short GI, WLAN Partition and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless.

cleclerc:
This problem has been fixed sending back out two DAP-2690 to DLink who changed them.

FurryNutz:
Enjoy.

Navigation

[0] Message Index