• January 20, 2019, 09:05:11 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DWL-2100 AP Advanced configuration in Client Mode  (Read 2835 times)


  • Level 1 Member
  • *
  • Posts: 1
DWL-2100 AP Advanced configuration in Client Mode
« on: November 04, 2011, 05:45:53 AM »

Hello all,

I have bought an DWL-2100 AP. The AP runs in "Client" mode. The Ethernet interface has been connected in a switch (simple - 16 ports). I am facing the following issue. The first 3 PCs that has been connected on switch have full network activity. The next two have limitations. I have already add from CLI the command "set matstate 1" or "set matstate 2". The "set matstate 1" command solve the issue of 1 PC (I have this issue at the beginning).

Could you inform me if needed some extra configurations ?
Which "set matstate" command is the correct for "Client Mode" ?

Also, please inform me if any limitations (in the number of the clients) exist in "Client mode".

Note, that the Dlink has been successfully connected as client in a separate AP.

Please don't hesitate to ask me if you have any assumptions about my configuration.

Thank you,