D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-867 => Topic started by: greener_31 on May 29, 2020, 08:29:59 AM
-
When checking to see Clients that are connected I only ever see the same 3 Clients. I know there are others connected but they don't show as connected clients.
Thanks.
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)
- What Hardware version is your router? Look at sticker under the router case.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
What browser are you using? Same thing happens in IE11, Firefox or Opera?
-
HW:A1 FW:1.00
I get same results with Chrome, FireFox, or the DLink WIFI app.
Thanks.
-
FW is behind. Something to update to and see if this corrects the problem:
http://forums.dlink.com/index.php?topic=75415.0 (http://forums.dlink.com/index.php?topic=75415.0)
-
Hi, sorry for the delay, finally got around to updating my firmware, now 1.2. Still the same issue.
My setup is the following, my ISP router is in bridge mode that goes to a TP-Link TL-R860 router in my basement. My DIR-867 is upstairs plugged in via LAN port and have DHCP Server disabled.
Always only the same 3 devices showing, desktop wired to DIR-867, my iPhone, and one other device. I have connected my android tablet to the wifi router and it will not show up. I've tried other devices as well and none of them will show up either.
Any help would be greatly appreciated.
-
So if you re-enabled DHCP on the DIR router and disconnect it temporarily from the other router, turn OFF the other router temporarily and connect ALL of your devices to the DIR router while its just ON, do you see any and all of your devices appearing in the clients list at all?
Normal operation your using for the DIR router is AP mode for the wireless is all?