D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-933L => Topic started by: Droido on March 12, 2016, 11:10:15 PM

Title: FTP on netgear routter
Post by: Droido on March 12, 2016, 11:10:15 PM

MY Netgear router has FTP function, it works on other devices but on Dlink camera
settings on Netgear is like:

host: readyshare.routerlogin.net
port:21

using the above link I am able to use FTP on other devices and works perfectly, but dlink camera says that it is an invalid FTP server. Now I am unable to record videos, please help me fix this.

Title: Re: FTP on netgear routter
Post by: FurryNutz on March 15, 2016, 07:08:57 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your DCS? Look at the sticker behind or under the camera.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DCSs web page under status.
• What region are you located?

What Mfr and model is the main host router?
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.93 or.33  DHCP (http://forums.dlink.com/index.php?topic=58017.0)

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com (http://forums.dlink.com/index.php?topic=62395.0)

DNS however might be helpful:
http://forums.dlink.com/index.php?topic=64492.0 (http://forums.dlink.com/index.php?topic=64492.0)

Title: Re: FTP on netgear routter
Post by: Droido on March 15, 2016, 01:45:14 PM

Hardware version: A 1
Firmware version: 1.13.05 (2015-11-18)
Location: Asia

Router:
Netgear R6300V2 Dualband router

Title: Re: FTP on netgear routter
Post by: sharpycl on March 21, 2016, 07:22:53 PM

I had the same problem with my netgear router. Using the local IP address of the router worked for me (eg. 192.168.1.1).

Title: Re: FTP on netgear routter
Post by: FurryNutz on March 22, 2016, 06:37:30 AM

Let us know if the suggested info helps any...