• April 23, 2024, 10:07:32 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: LED flashing red and green after reset  (Read 10454 times)

santhy

  • Level 2 Member
  • **
  • Posts: 26
LED flashing red and green after reset
« on: June 11, 2013, 11:45:08 PM »
Help!
I just reset one of my DCS932L, and now whenever I plug it the LAN cable the LED starts flashing red and green alternatively.
I have tried mutliple resets and different PCs and LAN cables... same issue.

Has anyone had that problem before?

Thanks,
Santhy.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: LED flashing red and green after reset
« Reply #1 on: June 12, 2013, 04:38:16 AM »
When you refer to multiple resets, did you perform a hard reset by pressing and holding the recessed reset button (using a paperclip) for > 8 seconds? or did you reset from within the web UI?

Things to try:
(1) Reload firmware
(2) Reconfigure camera using the wizard application. Make sure you are using the latest Wizard application that's compatible with the firmware uploaded into the DCS-932L
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

santhy

  • Level 2 Member
  • **
  • Posts: 26
Re: LED flashing red and green after reset
« Reply #2 on: June 13, 2013, 09:28:52 PM »
Hi,

yes I was referring to hard resets.
But I cant do anything with the cam at the moment it is not visible at all.
The wizard doesnt detect it, so impossible to uodate firmware or perform any operations on the cam :-(

S.
Logged

MacUser

  • Level 3 Member
  • ***
  • Posts: 112
Re: LED flashing red and green after reset
« Reply #3 on: June 19, 2013, 07:26:22 AM »
Quote from: santhy on June 13, 2013, 09:28:52 PM
Hi,

yes I was referring to hard resets.
But I cant do anything with the cam at the moment it is not visible at all.
The wizard doesnt detect it, so impossible to uodate firmware or perform any operations on the cam :-(

S.

On one of my cameras, eight seconds was not sufficient.   Try holding in the reset button for >30 seconds.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: LED flashing red and green after reset
« Reply #4 on: June 19, 2013, 08:17:26 AM »
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

santhy

  • Level 2 Member
  • **
  • Posts: 26
Re: LED flashing red and green after reset
« Reply #5 on: June 23, 2013, 05:53:47 AM »
Thanks, I have pressed the reset button for more than 30s still no effect.
Light is flashing red and green as soon as I plug the LAN cable.
Logged

RYAT3

  • Level 10 Member
  • *****
  • Posts: 2254
Re: LED flashing red and green after reset
« Reply #6 on: June 29, 2013, 06:31:36 PM »
Quote from: santhy on June 23, 2013, 05:53:47 AM
Thanks, I have pressed the reset button for more than 30s still no effect.
Light is flashing red and green as soon as I plug the LAN cable.


What equipment are you using?

Have you tried elsewhere, on a different network?

Is this a new camera that never worked? Or one that is headed for it's death?


Have you tried page 12? Creating a WPS connection?

http://www.dlink.com/-/media/Consumer_Products/DCS/DCS%20932L/Manuals/DCS_932L_Manual_v_1_EN_UK.pdf

page 14 says "red = camera offline", "green=camera online"
Logged

santhy

  • Level 2 Member
  • **
  • Posts: 26
Re: LED flashing red and green after reset
« Reply #7 on: July 16, 2013, 03:44:41 AM »
tried 2 different networks, the camera worked perfectly before, it just went dead after a hard reset.
Logged