• April 19, 2024, 02:09:41 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: why "bridge mode" is removed since v1.04  (Read 6942 times)

hkfriends

  • Guest
why "bridge mode" is removed since v1.04
« on: November 21, 2007, 05:11:30 AM »
I don't know why D-link remove the "bridge" mode in v1.05 and going forward... anyone know why?
I really need this feature to plug it to my Zywall 5 router.

Is there any workaround? I want my 655 becomes an Access Point.
« Last Edit: November 21, 2007, 05:46:33 AM by hkfriends »
Logged

ddwinell

  • Guest
Re: why "bridge mode" is removed since v1.04
« Reply #1 on: November 21, 2007, 07:59:59 AM »
Disable DHCP on the 655 and connect LAN to LAN from your Zywall to the DIR.
Logged

hkfriends

  • Guest
Re: why "bridge mode" is removed since v1.04
« Reply #2 on: November 21, 2007, 11:09:22 PM »
so simple?

I need to manually set LAN IP, gateway, DNS point to Zywall's address?

my wireless client can pass through DIR and get DHCP address from Zywall?
Logged

ddwinell

  • Guest
Re: why "bridge mode" is removed since v1.04
« Reply #3 on: November 26, 2007, 08:25:44 AM »
When you disable the DHCP server on the DIR, and connect LAN to LAN to the Zywall the DIR is now a Wireless Draft N switch. Each device connected to it, wired or wireless, will pull all DHCP information from your Zywall.
Logged

birnbad1

  • Level 1 Member
  • *
  • Posts: 3
Re: why "bridge mode" is removed since v1.04
« Reply #4 on: December 06, 2007, 04:05:13 PM »
I backed up my config under 1.04 - upgraded - then restored backup

the config for bridge mode was restored - I just can not change it
Logged

kot1rc5

  • Level 1 Member
  • *
  • Posts: 2
Re: why "bridge mode" is removed since v1.04
« Reply #5 on: December 07, 2007, 04:48:32 PM »
thats a neat trick, Ill have to try it

k
Logged

DRT-1000

  • n00b
  • Level 2 Member
  • **
  • Posts: 38
Re: why "bridge mode" is removed since v1.04
« Reply #6 on: December 10, 2007, 08:37:18 AM »
Sounds like it the functionality wasn't removed. Just the check box where you enable it then eh? Silly D-Link.
Logged

fallnout

  • Level 1 Member
  • *
  • Posts: 10
Re: why "bridge mode" is removed since v1.04
« Reply #7 on: December 10, 2007, 11:18:22 AM »
Hi hkfriends
I have the DIR-655 acting as an AP, connected to a ZyXel 5, and it does work.
In the Dlink manual look at page 12-13, where they specifiacally tell you what to do in order to setup the DIR-655 as an AP.
Also, if you go here http://www.dslreports.com/faq/11233, there is a detailed instructions  on the setup.
I hope that hepls ( or anyone else who wants to use any router as an AP)
Cheers  :)
Logged

Lycan

  • Administrator
  • Level 15 Member
  • *
  • Posts: 5335
Re: why "bridge mode" is removed since v1.04
« Reply #8 on: December 10, 2007, 04:24:13 PM »
The feature was removed in the 1.05 firmware due to complications in the firmware. The stability of the unit as a router was compromised by this feature and it was rectified.
Logged

hkfriends

  • Guest
Re: why "bridge mode" is removed since v1.04
« Reply #9 on: December 11, 2007, 05:07:50 AM »
Quote from: Lycan on December 10, 2007, 04:24:13 PM
The feature was removed in the 1.05 firmware due to complications in the firmware. The stability of the unit as a router was compromised by this feature and it was rectified.

Yes, I use the 1.10 and follow the step below can using AP mode now
Disable DHCP on the 655 and connect LAN to LAN from your Zywall to the DIR.

btw, another issue is:  the DIR is unable to send e-mail log alert - due to no WAN connected
Logged

fallnout

  • Level 1 Member
  • *
  • Posts: 10
Re: why "bridge mode" is removed since v1.04
« Reply #10 on: December 11, 2007, 06:41:38 AM »
Hi hk
You are right, no email because it has no WAN connected. That is true for ALL routers that are used as an AP.
Also no correct time, or time update for the same reason .... no WAN connected.
IMHO those shortcomings are tolerable.
My setup works very well, (no disconnections) with two exceptions.
- I am not able to restrict Wireless ONLY MAC. It will restrict MAC address on both wired AND Wireless, not wireless only. So I leave that in the "off" position.
- I would like to get wider coverage, but that means changing the antenna(s) and Dlink does not make them for the DIR-655. Maybe I am expecting too much with the coverage, as my former AP did not give me the coverage that the DIR-655 does give at the moment  :)
Cheers  :)  :)
Logged

hkfriends

  • Guest
Re: why "bridge mode" is removed since v1.04
« Reply #11 on: December 12, 2007, 01:49:20 AM »
yeah, MAC filtering for wireless is also my concern.  >:(
Logged