D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-5222L => Topic started by: Gothlinox on January 03, 2017, 04:37:55 AM
-
Hi,
I'm new with this camera and wanted to know if it's possible the following config:
- Take snapshots (motion detection and PIR) and send them by email (gmail).
- Record the triggered video (motion detection and PIR) but record it in SD card.
I tried to configure sending video, but got some files OK other empty and after a couple of minutes the camera image just hangs.
Thank you in advance.
-
There should be a priority assignment on each task. Try changing those.
Not sure what you mean by the image hangs. Could be a number of unrelated issues. Without knowing your exact settings, you could be emailing too many things causing a hold up there,or have a poor wifi connection, slow Internet speed, etc.
Try doing one thing at a time first.
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your DCS? Look at the sticker behind or under the camera.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DCSs web page under status.
- What region are you located?
What Mfr and model is the main host router?
What wireless modes are you using?
Hi,
I'm new with this camera and wanted to know if it's possible the following config:
- Take snapshots (motion detection and PIR) and send them by email (gmail).
- Record the triggered video (motion detection and PIR) but record it in SD card.
I tried to configure sending video, but got some files OK other empty and after a couple of minutes the camera image just hangs.
Thank you in advance.
-
Hi,
I was able to config it, unfortunately there's a limit on event creation, just 2. So had to make choices.
Hang in image it might be related to sending mails with 5MB. So I changed things a bit.
Now is sending snapshots by mail (everything fine) and video recording to sdcard.
Thank you all.
-
Enjoy. ;)