D-Link Wireless Access Points For Business > DAP-2360

Speed problem

<< < (2/3) > >>

kenderice:
The channel is set to automatic. Use 6 channels.
This model does not work at 5GHz frequency, only the 2.4GHz.
Security mode is "WPA-Personal". The WPA mode is AUTO. There are only two DAP 2360 APs in the network, no other wireless device.
Nearby devices use 2, 4, 9, 13 channels.
These pings:
192.168.0.200: bájt=32 idő=2006 ms TTL=64
192.168.0.200: bájt=32 idő=1 ms TTL=64
192.168.0.200: bájt=32 idő=1 ms TTL=64
192.168.0.200: bájt=32 idő=1 ms TTL=64
192.168.0.200: bájt=32 idő=2 ms TTL=64
192.168.0.200: bájt=32 idő=398 ms TTL=64
192.168.0.200: bájt=32 idő=388 ms TTL=64
192.168.0.200: bájt=32 idő=342 ms TTL=64
192.168.0.200: bájt=32 idő=101 ms TTL=64
192.168.0.200: bájt=32 idő=398 ms TTL=64
192.168.0.200: bájt=32 idő=400 ms TTL=64
192.168.0.200: bájt=32 idő=398 ms TTL=64
192.168.0.200: bájt=32 idő=1 ms TTL=64
192.168.0.200: bájt=32 idő=398 ms TTL=64
192.168.0.200: bájt=32 idő=3 ms TTL=64
192.168.0.200: bájt=32 idő=1 ms TTL=64
192.168.0.200: bájt=32 idő=1 ms TTL=64
192.168.0.200: bájt=32 idő=398 ms TTL=64
192.168.0.200: bájt=32 idő=401 ms TTL=64
192.168.0.200: bájt=32 idő=374 ms TTL=64
192.168.0.200: bájt=32 idő=422 ms TTL=64

FurryNutz:
Was this ping test done at the 1st AP?
Wired to the AP using Ethernet cable while testing?
Try using manual channel 6 and set WPA2 and AES only. Then test.

kenderice:
I turned off the encryption and tried other channels as well.
The problem always existed.
.200 AP the main AP. The AP client is the .201.
I was pinging from .201 AP.
Maybe one AP is wrong...? Or both?
I'm trying to swap the two devices.

kenderice:
I switched the devices.
An interesting thing happened!
Poor ping, but download-upload rate has changed.
Now the download has been 10 MBit/s and the upload is 80 MBit/s.
One device is defective, but I do not know which one ...

FurryNutz:
I would turn OFF the 2nd AP and ping test the first one wire to the AP. Then swap in the 2nd unit in place of the first unit and do same test. Should reveal something...

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information
We find that phone contact has better immediate results over using email.
Let us know how it goes please.

Navigation

[0] Message Index

[#] Next page

[*] Previous page