D-Link Forums

The Graveyard - Products No Longer Supported => DIR-655 => Routers / COVR => Europe DIR-655 => Topic started by: rastacongo on January 16, 2017, 09:58:41 AM

Title: Open UDP Ports 1024 and above
Post by: rastacongo on January 16, 2017, 09:58:41 AM
Hello,
I've got a device which the manufacturer suggests:

Quote
Usually, no port configuration is really necessary. You just have to make sure that all UDP ports above 1024 are not being blocked.
If it still doesn’t work, please create additionally a port forwarding for the ports 9573 & 3478, both UDP.

How can I do that on my 655?
Title: Re: Open UDP Ports 1024 and above
Post by: FurryNutz on January 16, 2017, 10:37:21 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)



Internet Service Provider and Modem Configurations

Possibly needed...What is this device?
Title: Re: Open UDP Ports 1024 and above
Post by: rastacongo on January 16, 2017, 10:46:46 AM
My router is DIR-655 A3 and firmware version 1.36WW
Im located in Cyprus (Greek Island) and my ISP is Primetel
My ISP's modem is the Telsey CPVA624


I have no access to the ISP modem though
Title: Re: Open UDP Ports 1024 and above
Post by: FurryNutz on January 16, 2017, 12:26:18 PM
Can you tell if the modem is a stand alone modem or does it have a built in router by chance?
Title: Re: Open UDP Ports 1024 and above
Post by: rastacongo on January 17, 2017, 01:20:13 AM
I think it has built in router. I have to mention that if I connect that device on my ISP's modem that has all ports open on LAN1 the device connects to the manufacturer's portal. Behind my router, not.
Title: Re: Open UDP Ports 1024 and above
Post by: FurryNutz on January 17, 2017, 10:59:05 AM
Might see if you can put the 655 in to the Modems DMZ and try again. You have a double NAT condition which isn't recommended.