• April 25, 2024, 01:46:41 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Mac filtering: set ON and ALLOW list: it it still NOT working  (Read 8355 times)

tom00

  • Level 1 Member
  • *
  • Posts: 3

Firwmare 1.05:
Item 1) Mac filtering: set ON and ALLOW list: it it still NOT working, any computer can get on the network
Item 2).media on usb Shareport : it is working now. Videos, Photos, Musics now playable. Thank you.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mac filtering: set ON and ALLOW list: it it still NOT working
« Reply #1 on: June 21, 2013, 02:22:21 PM »

Do you have the devices used in the MAC Filter set up for a IP Reservation ON the router?
Have you verified that the devices haven't changed there IP addresses after the reservation?

I'll attempt to reproduce this on my 865L this weekend.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mac filtering: set ON and ALLOW list: it it still NOT working
« Reply #2 on: June 22, 2013, 12:53:57 PM »

So I think mines working, I enabled Mac Filtering and input my Mac Book Pro MAC address and set for ON and ALLOW and Save Settings. After a few seconds, the rest of my devices could not get any Internet access. Any of them.

I'm using v1.05 with v1.04 saved configuration file applied.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

tom00

  • Level 1 Member
  • *
  • Posts: 3
Re: Mac filtering: set ON and ALLOW list: it it still NOT working
« Reply #3 on: June 29, 2013, 01:01:26 PM »

Sorry for late reply.
Here is my test again:
firmware 1.5:
Mac filtering: set ON and ALLOW list: it it still NOT working.
                  wireless security mode: none.
                  wps: disabled.         
                  Config settings saved. Router rebooted.
Results: any computer can access the network.

Do you mind explain the relationship among MAC filtering, WPS (Wifi Protected Setup), and wireless security mode: personal, and DHCP IP Reservation list?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mac filtering: set ON and ALLOW list: it it still NOT working
« Reply #4 on: June 29, 2013, 01:08:44 PM »

I use Reserved IP addresses, WPA2/AES only and WPS OFF.

WPS is only for connecting a WPS enabled wireless device to the router via a Pin number and push button method. Can be used but doesn't have any impact on Mac Filtering.

Not sure if not using any WPA security would impact this either.

Have you tried with using WPA security enabled along with IP address reservations?

You may need to phone contact D-LINK support and ask them about this and see if they can help narrow it down. Ask for level 2 or higher support.

I only enabled my one devices and like I said, ALL others could not access the network resources at all.  

Let us know how it goes.
« Last Edit: July 08, 2013, 11:21:23 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.