D-Link Range Extenders > DAP-1610

very slow throughput

(1/1)

afs_dms:
The DAP-1610 is connected on the 5 GHz AP of the uplink router, 20 feet away, this one uses a 300 Mbps WAN (Internet) link over fiber. At the other end, a W10 using a DWA-182 on a USB 3.0 port. Signal strength is full. I got 284 Mpbs (Internet) connected directly on the WAN router over 5.0 GHz, and only 20 Mbps connected to the DAP-1610. I just can't find any reason for this. Probably will change this DAP-1610 for another brand.

FurryNutz:
Link>Welcome!


* What Hardware version is your DAP? Look at the sticker under the DAP.
* Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
* What region are you located?

What Mfr and model is the main host router?

20 feet maybe too close. I would try 30 feet in between the DAP and host wifi router.

What does the 182 adapter get when connected at the host wifi router?

afs_dms:
Thank you FurryNutz, the issue in on the wan router / maybe even some level five treatment on the provider. I will test using a DIR-842 as wifi ap, using the gigabit ethernet.

FurryNutz:
Ok, let us know what you find out...

Navigation

[0] Message Index