D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-343 => Topic started by: JavaLawyer on May 16, 2012, 10:10:09 AM

Title: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on May 16, 2012, 10:10:09 AM
D-Link posted DNS-343 firmware version 1.05, which can be downloaded here: DNS-343  - Firmware v1.05 Download (ftp://ftp2.dlink.com/PRODUCTS/DNS-343/REVA/DNS-343_FIRMWARE_1.05.ZIP).

FYI:
Link>D-Link NAS Owner's :: Regarding CripTor Ransomware (https://securityadvisories.dlink.com/announcement/publication.aspx?name=SAP10110)

Please post your comments and observations as a reply to this thread.

 :)  ;)  :)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: dallen on May 16, 2012, 06:44:51 PM
Nervously updated from 1.05(beta) to 1.05(official) and everything went flawlessly.  D-Link moves ever so slowly with this product, but at least they move.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: iuliand on June 09, 2012, 08:52:42 AM
I thought I will never see this official release. This is good news.
I think it's time for me to finally make a firmware update to my trusty 343 because I need the NFS feature.
I believe 1.05 is enough tested and stable by now.

Currently I have fw 1.02 installed and worked well, but it's old.
I'm a bit nervous about this as it's the first time updating the firmware of the NAS and I have a few questions:

Do you know if upgrading directly from 1.02 is safe?
Do you have any idea what "Please make sure the Auto Power Recovery function is disabled before upgrading the firmware" means? Where do I find that setting?
I will need to redo all the settings after fw update from 1.02 to 1.05?

As I understood the data should be safe. I have backup-ed the most important things but I don't have the space to backup everything so I would prefer to see the data at it's place after the update.

Do you have any other advices for me?

Thank you.

edit: Forgot to mention that is configured as RAID5 with one Ext3 volume spread over four 1G WD green drives.

edit2: I think I've found the setting in Maintenance/Power management/Power recovery: Enable/Disable
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: iuliand on June 09, 2012, 09:39:51 AM
Is this FW worldwide?

edit: I have:
Model No.: DNS-343 H/W Ver. A1 F/W Ver. 1.02
P/N: ENS343M......A1G
S/N: P4GA18A000***

edit2: On http://tsd.dlink.com.tw the latest ww f/w for a1/b1 h/w is "DNS-343 B1 FW v1.05b03(for WW)". Is there any way to find the 1.05 release for ww or to have a confirmation this will work for me?

edit3: Interesting, both 1.05 and 1.05b03 have the same check sum: d8089e7f9591ee424dc8c70f213c0ffa
It seems it is the same file after all.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 09, 2012, 03:09:53 PM
Do you know if upgrading directly from 1.02 is safe?

Upgrading from v1.02 should be safe

Do you have any idea what "Please make sure the Auto Power Recovery function is disabled before upgrading the firmware" means? Where do I find that setting?

Log into the web interface and navigate to the following location: MAINTENANCE > Power Management > Power Recovery Settings

I will need to redo all the settings after fw update from 1.02 to 1.05?

Unknown

As I understood the data should be safe. I have backup-ed the most important things but I don't have the space to backup everything so I would prefer to see the data at it's place after the update.

Do you have any other advices for me?
. . . .

edit: Forgot to mention that is configured as RAID5 with one Ext3 volume spread over four 1G WD green drives.

The firmware upgrade should not impact your existing HDD cofiguration or existing data. That said, you should always maintain a separate physical backup of your data. As I'm sure you're aware, RAID-5 provides redundancy, but is not a replacement for a separate physical backup. DNS-343 - Data Backup vs. Redundancy (http://forums.dlink.com/index.php?topic=46512.0)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 09, 2012, 03:11:29 PM
Is this FW worldwide?

edit: I have:
Model No.: DNS-343 H/W Ver. A1 F/W Ver. 1.02
P/N: ENS343M......A1G
S/N: P4GA18A000***

edit2: On http://tsd.dlink.com.tw the latest ww f/w for a1/b1 h/w is "DNS-343 B1 FW v1.05b03(for WW)". Is there any way to find the 1.05 release for ww or to have a confirmation this will work for me?

edit3: Interesting, both 1.05 and 1.05b03 have the same check sum: d8089e7f9591ee424dc8c70f213c0ffa
It seems it is the same file after all.

The latest firwmare release is compatible with hardware version A1.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: iuliand on June 10, 2012, 09:30:00 AM
Thanks for the reply.

I successfully updated the fw to 1.05.
I was a little bit worried when it asked me to pull the power cord in order to finish the OLED update but it eventually went ok.

Now in the fw upgrade section it says:

Current NAS Firmware Version :     1.05
Current OLED Firmware Version :     1.03
Firmware Date :     10/14/2011

I suppose it's normal to have OLED fw version 1.03(?)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 10, 2012, 09:50:35 AM
Yes, the OLED version is correct.
Glad the update went okay for you.
...and consider establishing a perminant backup strategy for your RAID-5 array  ;)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: iuliand on June 10, 2012, 12:49:14 PM
Just a minor thing:
In Maintenance\Email alerts\Alert types\Send log files\"Weekly" after saving settings, the "Day of month" setting will appear though that's a setting for "Monthly" option.
Strange.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 12, 2012, 09:59:29 AM
Just a minor thing:
In Maintenance\Email alerts\Alert types\Send log files\"Weekly" after saving settings, the "Day of month" setting will appear though that's a setting for "Monthly" option.
Strange.

Do you recall if that issue appeared in the earlier FW? I don't have a DNS-343 running the older FW you were previously using.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: iuliand on June 12, 2012, 01:24:25 PM
Do you recall if that issue appeared in the earlier FW? I don't have a DNS-343 running the older FW you were previously using.
That option was not present in 1.02.
But that is a minor issue. My biggest problem right now is that I get very poor performance over NFS.

First I've tested with the media player and it was seeing the folder structure and files but was not able to sustain playing any video content.
Now I've tested with my computer and after mounting the NFS path and started to copy a file the speed reported by windows 7 started at 150KBps and slowly rises up to 750-900KBps (I couldn't wait more). Any video content that I try to play over NFS stutters very badly.
Over SMB performance is much better (around 3MBps over WiFi and up to 10MBps over wire).

Could you please confirm what is your speed over NFS?
I'm frustrated because I can't use it at that speed :(

PS: If you need instructions how to configure NFS on the NAS and windows 7 please let me know. It took me some time to figure all that out... I could write a small tutorial about that now :)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 12, 2012, 01:39:06 PM
PS: If you need instructions how to configure NFS on the NAS and windows 7 please let me know. It took me some time to figure all that out... I could write a small tutorial about that now :)

Are you volunteering to contribute to our FAQ library?  Sure sounds like it!  ;)
Every submission helps.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: iuliand on June 12, 2012, 04:18:40 PM
Are you volunteering to contribute to our FAQ library?  Sure sounds like it!  ;)
Every submission helps.

Here are some instructions. Please feel free to correct/cut/edit/rearrange them when adding to the FAQ (if you think they are worthy). Also if you have the time please make a speed test over NFS. I'm very frustrated about this as it seems everyone else on this forum doesn't seem to suffer from this. Thanks.

Configuring NFS network access on DNS-343 (f/w 1.05)

1) Log on to NAS web configuration and go to Advanced\Network access\NFS settings and set "NFS Server: Enable"
2) Below, on "Network access settings" click "NFS"
3) In "Host" field type "192.168.0.0/24" (assuming your network is 192.168.0.0/255.255.255.0). This means you allow connections with all client IPs in range. If you want to grant access to a specific client then type in only the client's IP (without /24).
4) In "Folder" field click "Browse" button and choose the folder to share, for instance "Volume_1/Some/Folder".
5) Set desired permission then click "Save settings". Now in the "NFS list" below you should see the newly added entry. Here, one important information to note is the "Real path: /mnt/HD_a2/Some/Folder". You will use this to configure the client(s).

Configuring Windows 7 as NFS client

1) Go to CP\Programs\Turn Windows features on and off. Find in the windows features list "Services for NFS", expand it and check both items inside it ("Administrative tools" and "Client for NFS"). Then click OK.
2) Go to Control Panel\System and Security\Administrative Tools\Services for Network File System (NFS). Click "Client for NFS" and in "Action" menu check the service to be started. If not then click "Start Service". Here, on the right, you can also find some useful help links.
3) Open command prompt (cmd) and type
"mount -o mtype=soft anon fileaccess=7 \\192.168.0.32\mnt\HD_a2\Some\Folder n:"
Where:
- mtype can be "soft" or "hard" depending if you want the client to endlessly try to connect to the NFS mount in case the connection in lost ("hard" may lead to unresponsive applications).
- 192.168.0.32 is the NAS IP (modify with yours)
- \mnt\HD_a2\Some\Folder is the real path mentioned in the NAS configuration
- n: is the drive letter to mount the share.
4) If after pressing ENTER you see "The command completed successfully." message then most probably everything is ok. To check, type "dir n:" and you should see the list with files and folders on the share. Also the share should already be seen in My computer as a Network location (If not then check the command prompt window NOT to be opened as administrator because the mount command will take effect only for the user that issued it and not for the others). Other useful commands are: "mount" to see what is mounted and "umount -a" to unmount all the drives.

Configuring a media player (TViX M-6500a in my case) as NAS client

1) Find the NFS share settings and fill in:
- "Server IP: 192.168.0.32" (NAS IP)
- "Share name: \mnt\HD_a2\Some\Folder" (the real path)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 13, 2012, 05:07:15 AM
Thanks for your contribution.  ;)

I should have an opportunity to conduct a speed test in a week or so (it's in my to do queue).

Through drag-drop with Windows 7 Explorer I typically observe 30-33 MB/s download and 10-12 MB/s upload. I use SMB exclusively to stream video from my DNS-343 to Boxee Box (wired via DIR-857), but don't have hard metrics to report. Qualitatively, I can say that HD 1080 video plays seamlessly.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 13, 2012, 05:11:07 AM
Thanks for your contribution.  ;)

I should have an opportunity to conduct a speed test in a week or so (it's in my to do queue).

Through drag-drop with Windows 7 Explorer I typically observe 30-33 MB/s download and 10-12 MB/s upload. I use SMB exclusively to stream video from my DNS-343 to Boxee Box (wired via DIR-857), but don't have hard metrics to report. Qualitatively, I can say that HD 1080 video plays seamlessly.

My DNS-343s are configured as Standard Volumes, which should exhibit better performance than your RAID-5 due to the overhead of the RAID array. Furthermore, the DNS-343 uses software RAID, which adds additional overhead than a hardware-based controller.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 13, 2012, 06:07:56 AM
Your FAQ is posted here: DNS-343 - Configuring NFS Network Access (http://forums.dlink.com/index.php?topic=49112.msg181120#msg181120) (with credit at the footer of the post)

Please let me know if you have any revisions.
Thanks again!
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 13, 2012, 09:57:01 AM
No problem. . . should be able to do this test sooner rather than later.  You've piqued my interest in how this will (and should) perform.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: rOBvAN on June 15, 2012, 01:51:01 AM
It says that the new firmware supports AFT drives.

Does that now mean it's compatible with 3TB drives?
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 15, 2012, 04:52:48 AM
It says that the new firmware supports AFT drives.

Does that now mean it's compatible with 3TB drives?

The DNS-343 supports AFT HDDs up to 2TB capacity. The DNS-343 has limitations that prohibit the device from working with HDDs exceeding 2TB.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on June 19, 2012, 05:06:17 AM
I split the NFS discussion to a new thread so I can lock down this Firmware 1.05 thread (in lieu of the new firmware release).

DNS-343 - NFS Functionality (http://forums.dlink.com/index.php?topic=49269.0)
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: Schtuperman on January 10, 2015, 05:27:01 AM
I  have a DNS-343 that is running 1.03 firmware.  I would  like to update it to the 1.05 (Official) release but it looks like D-Link has killed all ftp support for the device.  Would anyone happen to have available the 1.05 (Official) firmware so I could update this thing?  Thank you.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on January 10, 2015, 05:35:01 AM
I  have a DNS-343 that is running 1.03 firmware.  I would  like to update it to the 1.05 (Official) release but it looks like D-Link has killed all ftp support for the device.  Would anyone happen to have available the 1.05 (Official) firmware so I could update this thing?  Thank you.

I updated the first post on this thread with the FW download link.
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: Schtuperman on January 10, 2015, 06:08:15 AM
Thank you very much JavaLawyer!  You da man!    ;D
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: JavaLawyer on January 10, 2015, 06:20:39 AM
Glad to help ;0
Title: Re: DNS-343 - Firmware v1.05 (Official Release) Comments & Observations
Post by: FurryNutz on February 26, 2019, 07:02:33 AM
FYI:
Link>D-Link NAS Owner's :: Regarding CripTor Ransomware (https://securityadvisories.dlink.com/announcement/publication.aspx?name=SAP10110)