D-Link Forums

D-Link Wireless Access Points For Business => DAP-2310 => Topic started by: randymanchester on June 27, 2013, 06:47:19 AM

Title: dap-2310
Post by: randymanchester on June 27, 2013, 06:47:19 AM

I'm having an issue getting internet access using a DAP-2310 WAP with my samsung galaxy tab 2.  I can get access from my ipad and iphone so I know it's working somewhat correctly.   

The device connects and gets an IP but then says that the website is not available.  I can ping the device on the network.

The firmware is 1.5


Thanks

Title: Re: dap-2310
Post by: FurryNutz on June 27, 2013, 06:52:10 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=41537.0)

• What region are you located?

Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0)

• Ensure the default (dlink) SSID name is changed. Can be anything and not something thats already in use by any neighboring WiFi routers. Under
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Channel Width set for Auto 20/40Mhz or try 20Mhz only.
• Try setting a manual Channel (http://en.wikipedia.org/wiki/Wireless_channel) to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES (http://en.wikipedia.org/wiki/Advanced_Encryption_Standard), so you might want to try TPIK (http://en.wikipedia.org/wiki/Temporal_Key_Integrity_Protocol) only or Auto TPIK and AES.