• March 28, 2024, 04:27:14 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Mail configuration  (Read 9782 times)

sylk78

  • Level 1 Member
  • *
  • Posts: 6
Mail configuration
« on: November 12, 2012, 12:35:37 PM »

Hello :)

Here an how-to:

I use a gmail account

fw 1.0

Username: myemail@gmail.com
Password: my gmail password
Port: 587
SMTP server: smtp.gmail.com
Sender Email: myemail@gmail.com
Receiver Email: myemail@gmail.com
use : STARTTLS

That work for me :)

Tips:
As sender Email use myemail+[label]@gmail.com for an easier filtering.
example : titifoo+nas@gmail.com

Regards,
Cedric.
Logged

Turcy086

  • Level 1 Member
  • *
  • Posts: 3
Re: Mail configuration
« Reply #1 on: June 21, 2013, 11:18:59 AM »

Yes is know, you write your issue more than half year, but check this:

http://email.about.com/od/accessinggmail/f/Gmail_SMTP_Settings.htm

Maybe the port that you write is bad :\
Logged

zdravo

  • Level 1 Member
  • *
  • Posts: 1
Re: Mail configuration
« Reply #2 on: November 02, 2015, 10:38:54 AM »

This topic is pretty dead, but I am having the same problem.

So, I cannot configure it to send me a notification mail from my gmail account.
Why?

FW 1.04
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mail configuration
« Reply #3 on: November 02, 2015, 11:29:00 AM »

Link>Welcome!

  • What Hardware version is your DNS? Look at the sticker behind or under the device.
  • Link>What Firmware version is currently loaded? Found on the DNSs web page under status.
  • What region are you located?


What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNS set to 192.168.#.34 or .40.

Setting up email on DCS series cameras FAQ - http://forums.dlink.com/index.php?topic=63536.0

This topic is pretty dead, but I am having the same problem.

So, I cannot configure it to send me a notification mail from my gmail account.
Why?

FW 1.04
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

ivan

  • Level 8 Member
  • ***
  • Posts: 1480
Re: Mail configuration
« Reply #4 on: November 03, 2015, 08:36:29 AM »

First thing, the settings for sending must be correct.

The user name/password are what is used to log in to the NAS shares from a computer on the network.

For the port and SMTP Server see https://support.google.com/a/answer/176600?hl=en  Although they mention printer etc. it is the same for the NAS.

The sender should be something to define the NAS (example: my.nas@myhome.com)

SMTP Auth - see the info in the above link.

Finally do a test send to check it is up and running.

Don't forget to save settings and also set what information you want to get from the NAS box.

The receiver is your gmail name@gmail.com
Logged

s0litaire

  • Level 1 Member
  • *
  • Posts: 3
Re: Mail configuration
« Reply #5 on: January 15, 2016, 09:06:01 PM »

If you are sending to a legitimate Google email then:

Select "ANONYMOUS"
use Port "25"
Then use this SMTP server "aspmx.l.google.com"
Enter in the email you wish to send to in the "Sender E-Mail" box (This can be your gmail email adderss)
Enter in your Gmail address in the  "Reciever E-mail" box
Set "Secure Connection" to "NONE"

That is what I'm using and I’m getting emails from my NAS weekly

This only works if you are sending TO a google address, sending to other addresses will not work.

If you are still not getting emails check your SPAM folder as google might place them in there.
Also you might need to check if port 25 is blocked or opened on your router (most routers have a "port forwarding" or "port opening" option make sure it is set to allow port 25 from your NAS) check the routers help pages or ISP's website of you can't find the option.
Logged

Don_CA

  • Level 1 Member
  • *
  • Posts: 1
Re: Mail configuration
« Reply #6 on: May 26, 2018, 05:10:58 AM »

My email used to work, then stopped a few months ago with no changes on my end.  Anyone else still using gmail for this? 
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mail configuration
« Reply #7 on: May 26, 2018, 08:49:40 AM »

Check with Google mail and see if there service configurations have changed. Usually this is the case if you haven't done anything to the DNS...

My email used to work, then stopped a few months ago with no changes on my end.  Anyone else still using gmail for this?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: Mail configuration
« Reply #8 on: May 29, 2018, 07:17:10 AM »

Logged

Fabiano Pinheiro

  • Level 2 Member
  • **
  • Posts: 35
Re: Mail configuration
« Reply #9 on: May 30, 2018, 07:57:39 AM »

you will have to change the security settings on google

https://myaccount.google.com/security

Allow less secure apps: ON

and work again  ;) ;)
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mail configuration
« Reply #10 on: May 30, 2018, 08:51:20 AM »

Hope this helps future users. Thanks for posting this information.

you will have to change the security settings on google

https://myaccount.google.com/security

Allow less secure apps: ON

and work again  ;) ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Brigadier

  • Level 1 Member
  • *
  • Posts: 10
Re: Mail configuration
« Reply #11 on: October 25, 2019, 10:10:19 PM »

This thread has been around for a long time.  I'm having the test mail failure problem despite following all of the guidance here.  I have an older DNS323 on which the email notifications work perfectly but on my DNS345, I've never been able to get a status email.  I initially duplicated the 323's info into the 345 and that didn't work.  I have created the appropriate app password on gmail, to no avail.

DNS345 firmware 1.04

User Name: mygmail@gmail.com
Password: as supplied by Google
Port: 587
SMTP Server: smtp.gmail.com
Sender email: test@dns345.com
Receiver email: mygmail@gmail.com
Connection: STARTTLS

Any more guidance?

Edit 1: Never mind.  I decided to alter the Port to 465 and the Connection to SSL, and it now works.  For posterity.
« Last Edit: October 25, 2019, 10:12:59 PM by Brigadier »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Mail configuration
« Reply #12 on: October 28, 2019, 11:13:34 AM »

Glad you got it working.

Enjoy.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.