• April 19, 2024, 01:17:23 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 [3] 4 5 ... 9

Author Topic: 1.31 Offical Release  (Read 72270 times)

Toilet-Duck

  • Level 2 Member
  • **
  • Posts: 41
Re: 1.31 Offical Release
« Reply #30 on: April 29, 2009, 12:42:19 PM »
Quote from: MDR on April 29, 2009, 12:29:03 PM
Will there be a version of 1.31 that does not have Secure Spot?

Ive never known why there are 2 versions of securespot and no securespot.

Doesnt disabling securespot in the router options, the same as having no securespot at all? Except that there is an option to enable it?
Logged

MDR

  • Level 1 Member
  • *
  • Posts: 2
Re: 1.31 Offical Release
« Reply #31 on: April 29, 2009, 12:44:06 PM »
That's possible - I've been using the "No Securespot" FW previously, so thought I'd ask.

Quote from: Toilet-Duck on April 29, 2009, 12:42:19 PM
Ive never known why there are 2 versions of securespot and no securespot.

Doesnt disabling securespot in the router options, the same as having no securespot at all? Except that there is an option to enable it?
Logged

sambol

  • Level 1 Member
  • *
  • Posts: 19
Re: 1.31 Offical Release
« Reply #32 on: April 29, 2009, 01:01:47 PM »
Upgraded... so far so good... but when I login to device, close that tab, open new and try to login, it fails. I close browser window, start browser again and it works until I again close tab... is this expected behavior?
Logged

EddieZ

  • Level 10 Member
  • *****
  • Posts: 2494
Re: 1.31 Offical Release
« Reply #33 on: April 29, 2009, 01:42:47 PM »
Officially updated to 1.31. Shareport works, all nice and smooth.
Logged
DIR-655 H/W: A2 FW: 1.33

sambol

  • Level 1 Member
  • *
  • Posts: 19
Re: 1.31 Offical Release
« Reply #34 on: April 29, 2009, 02:20:16 PM »
Also, when I disabled graphical authentication, I was unable to login to router, it says that password is incorrect. I done hard reset of the router, same behavior. Graphical authentication in now on, but previously stated problem is still there.

edit: problem "solved", when enter password and hit [Enter], it doesn't work, I must click on Log In to successfully login to router.

PS Thanks Lycan for his fast response :)
« Last Edit: April 29, 2009, 03:24:11 PM by sambol »
Logged

mazman

  • Level 1 Member
  • *
  • Posts: 18
Re: 1.31 Offical Release
« Reply #35 on: April 29, 2009, 03:32:36 PM »
Has anyone tried out the Wake on Lan port forwarding?
Logged

lotacus

  • Level 4 Member
  • ****
  • Posts: 450
Re: 1.31 Offical Release
« Reply #36 on: April 29, 2009, 04:58:16 PM »
Its not going to work. The wol is on the broadcast adress and uses a simple ping to wake the computer.
Logged

pcew

  • Level 1 Member
  • *
  • Posts: 2
Re: 1.31 Offical Release
« Reply #37 on: April 29, 2009, 07:32:33 PM »
I upgraded my firmware to 1.31 and it displays as 1.31NA - pretty sure it is NorthAmerican - if I not wrong. Well so far working great. Awesome..!!!
Logged

lookez

  • Level 1 Member
  • *
  • Posts: 17
Re: 1.31 Offical Release
« Reply #38 on: April 29, 2009, 07:44:28 PM »
Shareport not working on Mac OS with 1.31, on 1.30 it worked with a lot of bugs and forcing me to force shutdown my mac.
Logged

rcschaff

  • Level 1 Member
  • *
  • Posts: 22
Re: 1.31 Offical Release
« Reply #39 on: April 29, 2009, 07:46:08 PM »
Are the screens the same as previous versions?  Would be nice to see some..
Logged

gdbr

  • Guest
Re: 1.31 Offical Release
« Reply #40 on: April 29, 2009, 09:44:54 PM »
Updated from the package in the FTP site, reset to its factory defaults and configured from the scratch, by hand. A2 hardware. It's showing 1.31NA (never showed this "NA" before. anyway...) and seems to be working fine so far, except for a noticeable rate and signal loss on wireless, which is weird because nothing has been changed (positions, antennas, even channels). inSSIDer is still showing the same signal strenght as before. I've tried disabling b signal but it kept the same behavior.

Has anyone noticed the same? I've just realized that the router has never showed the full speeds it's showed with the original firmware (1.10 ou 1.11, I guess).
Logged

lizzi555

  • Level 5 Member
  • *****
  • Posts: 605
Re: 1.31 Offical Release
« Reply #41 on: April 29, 2009, 10:19:41 PM »
Quote from: .Gui on April 29, 2009, 09:44:54 PM
Has anyone noticed the same? I've just realized that the router has never showed the full speeds it's showed with the original firmware (1.10 ou 1.11, I guess).

Yes but when copying files from LAN to Wireless the speed is the same as before.
I get up to 8,5 MB/s to a Thinkpad laptop with internal Atheros AGN PCIe card.
Also the DIR is showing 81 to 165 Mbit connection and only sometimes up to 240 Mbit.
 
Logged

jpm67

  • Level 1 Member
  • *
  • Posts: 24
Re: 1.31 Offical Release
« Reply #42 on: April 30, 2009, 04:33:15 PM »
I'm having a couple of problems with firmware 1.31:

1: Prior to the upgrade my wireless bridge (DD-WRT) and my Internet Alarm Clock connected fine using AUTO WPA and (TKIP and AES) settings on the DIR-655 (FW1.21 A2). Now the clock can't get an IP address and doesn't work if I assign one manually. I had to create a guest zone and set it to 128bit WEP to get it to work.

The clock is a Aluratek AIRMM01F Internet Radio Alarm Clock with Built-in WiFi.
http://aluratek.com/product_info.php?products_id=54&display=All

2: With both devices now connected wirelessly, under status --> wireless, the device on the WPA SSID is connected and works, but doesn't show an IP address. It shows 0.0.0.0. The device connected on the guest zone shows the IP address as expected.

These are the only problems I've experienced so far. I followed the recommendations on upgrading, resetting to factory defaults and restoring the previous config. I also tried resetting to factory defaults and manually reconfiguring with the same results.

« Last Edit: April 30, 2009, 04:40:16 PM by jpm67 »
Logged

DaveH

  • Level 1 Member
  • *
  • Posts: 10
Re: 1.31 Offical Release
« Reply #43 on: April 30, 2009, 06:40:18 PM »
I am a novice user just looking for consistency. I have noticed since upgrading to 1.31NA my connection drops often. I checked with my Internet provider and they are not showing my modem dropping off. When it does it is for a few seconds and comes back quickly. It is most noticeable on my VoIP which is wired. It is constantly breaking up and has become unusable. My desktop is wired and drops out as well. This is noticeable while streaming Sirius.

Are there settings I need to adjust? Keep in my I am very inexperienced with this. Unless I can get help I will be forced to get a new router. That would be frustrating considering problems were brought on by a firmware upgrade. If I understand correctly, I cannot go back to an earlier firmware version?
Logged

lizzi555

  • Level 5 Member
  • *****
  • Posts: 605
Re: 1.31 Offical Release
« Reply #44 on: April 30, 2009, 10:41:59 PM »
Quote
I have noticed since upgrading to 1.31NA my connection drops often

You're sure the router drops connection ? Did you look into the LOG ? What are the messages when connection drops ?

What kind of connection is in use ? Cable or DSL ?
Which Modem do you use ?

You reset the device to factory defaults after upgrade and configured it manually ?
Did you already try to set the WAN-Port speed to 100Mbps - not Auto ?
Logged
Pages: 1 2 [3] 4 5 ... 9
« previous next »