• March 18, 2024, 08:32:31 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: i can't flash 895L  (Read 10065 times)

i3zdx

  • Level 1 Member
  • *
  • Posts: 11
i can't flash 895L
« on: January 11, 2019, 03:54:07 AM »

hello

when i try to flashing my DIR-895L with dd-wrt

from(management>upgrade>upgrade manually>select file)

its popping message (Frimeware Upgrade failed)

my current FW(1.15, Thu 28 Sep 2017)

can you help me plz
Logged

i3zdx

  • Level 1 Member
  • *
  • Posts: 11
Re: i can't flash 895L
« Reply #1 on: January 11, 2019, 05:47:14 AM »

 I tried also with recovery emergency but can’t connect to 192.168.1.1 and no internet i don’t no why
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: i can't flash 895L
« Reply #2 on: January 11, 2019, 07:12:44 AM »

You need to do the Emergency recovery and downgrade the FW to v1.11 then try to migrate to WRT.

Please refer to DD-WRTs forum for additional help and information for using there FW.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

i3zdx

  • Level 1 Member
  • *
  • Posts: 11
Re: i can't flash 895L
« Reply #3 on: January 11, 2019, 07:36:51 AM »

Update succesfull but..  the network led is orange no internet
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: i can't flash 895L
« Reply #4 on: January 11, 2019, 07:38:10 AM »

The LED activity will not be the same as with the D-Link firmware. On the 890L I just get an orange LED. 

Reboot your modem.

What ISP do you have?
Logged

i3zdx

  • Level 1 Member
  • *
  • Posts: 11
Re: i can't flash 895L
« Reply #5 on: January 11, 2019, 07:49:07 AM »

i rebooted
but same no connection

i cant even access 192.168.1.1 or 192.168.0.1

i changed the local pc ip to 192.168.1.2
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: i can't flash 895L
« Reply #6 on: January 11, 2019, 07:54:41 AM »

Can you ping 192.168.1.1?
Logged

i3zdx

  • Level 1 Member
  • *
  • Posts: 11
Re: i can't flash 895L
« Reply #7 on: January 11, 2019, 08:02:07 AM »

with commands?

Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.2: Destination host unreachable.
Reply from 192.168.1.2: Destination host unreachable.
Reply from 192.168.1.2: Destination host unreachable.
Reply from 192.168.1.2: Destination host unreachable.

Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: i can't flash 895L
« Reply #8 on: January 11, 2019, 09:15:11 AM »

What file did you use to sent to the router to migrate to WRT?

Can you still access the emergency recovery page?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

notzippy

  • Level 1 Member
  • *
  • Posts: 2
Re: i can't flash 895L
« Reply #9 on: March 19, 2019, 02:55:39 AM »

Im having the same issue. I have tried versions as old as the newest release to r37961 to r27XXX
I have started with am OEM firmware bases of 1.11 1.13 1.15 , each one failed, and it fails pretty early on, the power led switches from orange (25 seconds)  to white (1 second) to off (2 seconds). I have also tried resetting to factory defaults before flashing dd-wrt . It looks like the device is restarting, the network connection even drops. But when it is up it still hands out the old address 192.168.0.125 not something like 192.168.1.125 which I would have expected.

Its weird I had flashed this device before and I didnt have these issues....

Any thoughts ?
nz

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: i can't flash 895L
« Reply #10 on: March 19, 2019, 06:49:29 AM »

Link>Welcome!

  • What region are you located?

Can you get v1.21B05 loaded with this process back on the router?
Emergency Recovery Mode



Im having the same issue. I have tried versions as old as the newest release to r37961 to r27XXX
I have started with am OEM firmware bases of 1.11 1.13 1.15 , each one failed, and it fails pretty early on, the power led switches from orange (25 seconds)  to white (1 second) to off (2 seconds). I have also tried resetting to factory defaults before flashing dd-wrt . It looks like the device is restarting, the network connection even drops. But when it is up it still hands out the old address 192.168.0.125 not something like 192.168.1.125 which I would have expected.

Its weird I had flashed this device before and I didnt have these issues....

Any thoughts ?
nz
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

notzippy

  • Level 1 Member
  • *
  • Posts: 2
Re: i can't flash 895L
« Reply #11 on: March 19, 2019, 08:17:24 AM »

I am in NA region

Yes I can get v1.21b05 flashed on the router - now none of the DD-WRT factory - DDWRT files are working.

Thanks
Nz
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: i can't flash 895L
« Reply #12 on: March 19, 2019, 08:39:14 AM »

Probably means that the WRT files are not supporting encryption. D-Link started encrypting there core FW code I believe with v1.20.
If recent WRT isn't working, then you'll have to downgrade the 895L using same process to recover, load v1.11 back on the 895L, then you should be able to migrate to WRT.

I am in NA region

Yes I can get v1.21b05 flashed on the router - now none of the DD-WRT factory - DDWRT files are working.

Thanks
Nz
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.