D-Link Forums

D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: lotfi213 on December 10, 2013, 05:26:20 AM

Title: Publish VPN Server through a DSL-2750 DLINK Router
Post by: lotfi213 on December 10, 2013, 05:26:20 AM

Hello,

I would like to know what should i do to configure a DSL-2750 Router (the router connecting to internet as PPPOE client) to pass traffic to a Microsoft Threat Management Gateway 2010 configured as VPN Server?

In other words, is it possible to open some ports in the firewall and then map them to a server on the LAN?

Thanks in advance!!
Regards!

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: lotfi213 on December 10, 2013, 10:51:36 PM

any idea about that dlink guys??  :-X

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: FurryNutz on December 11, 2013, 07:00:43 AM

I recommend phone contacting your regional D-Link support office and ask about this. This modem is not marketed here in the NA region and features vary on some Modems. Review the user manual as well for features...Some operation may not be support on this model modem. Ask D-Link what is supported and how to set them up. Good luck.

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: lotfi213 on December 12, 2013, 04:01:00 AM

Hello,
I think that i start to figure out how to do so... You need to add a new Virtual Server for port 1723 TCP port, and that worked fine (checked that with open port checking websites).

Now, I need to open the port IP 47, which is not TCP nor UDP protocol...

And i don't find how to do that...

I'll be so grateful for your help dudes!
Regards!

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: lotfi213 on December 12, 2013, 04:52:30 AM

i just would like to say that there's no DLINK support in the country where i come from  :(

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: FurryNutz on December 12, 2013, 12:31:23 PM

IF there is an Virtual Server option for port 47, just use Any or Both if there are these options. Port 47 will be TCP or UDP depending or it can be both.

What region are you located?

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: lotfi213 on December 12, 2013, 01:45:57 PM

i tried the option of choosing TCP/UDP with port number 47 in source/destination but i should confirm that GRE is a tunneling protocol (not using TCP or UDP)...
i come from Algeria, North Africa
and i really want to talk to some DLINK specialists about this issue
thanks in advance!

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: FurryNutz on December 12, 2013, 02:10:35 PM

I recommend trying the support number found there and see if any one here can help out:
http://www.d-link.co.za/corporate/contact/ (http://www.d-link.co.za/corporate/contact/)

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: lotfi213 on December 16, 2013, 12:17:39 AM

i sent an email last wednesday, but without a reply till now.. :(

Title: Re: Publish VPN Server through a DSL-2750 DLINK Router
Post by: FurryNutz on December 16, 2013, 12:32:59 PM

I recommend getting on the phone line with them for more immediate help and info. Using emails maybe not result in much.