D-Link Forums

D-Link Wireless Access Points For Business => DAP-3662 => Topic started by: mcevco47 on August 11, 2018, 07:05:47 PM

Title: Cable 500/20 modem connected to 3 Dap 3662 in WDS with AP intermittent signal
Post by: mcevco47 on August 11, 2018, 07:05:47 PM

Hey Guys

I will start off by saying I pay for cable 500/20 hitron modem/router combo
I have a DAP 3662 connected with a cat 6 cable into the back of the modem, modem not in bridge mode,
Another Dap 3662 is located about 300 ft away and connects to the main Dap 3662 in WDS with AP mode(95 % signal on 2.4 and 60% signal on 5)
then there is another Dap 3662 connected to the second one in WDS with AP mode(94% signal on 2.4 and 55% on 5).
2.4 is configured all as WDS with AP, set to same wifi channel, same name and same password
5GHz is configured all as WDS with AP, and all parameters set to the same

My problem is its frankly not reliable internet, the Dap 3662 are only 3-4 months old
at the second Access point with 100% signal I get about 20 -30 Mbps on the 2.4
and 40-50 on 5GHz

my setup is designed to cover all reaches of a campground so lots of space and  Ethernet to Access point 2 and 3 isn't practical
what is your expert opinion on it

any fancy settings I need to configure?

I am a fibre/DSl internet installation technician so I am technical

Thanks
Mcevco47

Title: Re: Cable 500/20 modem connected to 3 Dap 3662 in WDS with AP intermittent signal
Post by: FurryNutz on December 03, 2019, 08:39:11 AM

Any progress on this?
There is new FW available:
http://forums.dlink.com/index.php?topic=75233.0 (http://forums.dlink.com/index.php?topic=75233.0)