• April 25, 2024, 12:19:57 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: D View Cam with DCS-910's and 920  (Read 17456 times)

PICOdave69

  • Level 1 Member
  • *
  • Posts: 10
D View Cam with DCS-910's and 920
« on: January 26, 2009, 03:25:13 PM »
I left the PC running for the last 8 hours, it still says CONNECTING !
Do you think it will ?

Reminds me of MS Windows Vista ! Much prettier, but less functional !

I have 9 PC s running here at home, and only 1 works with D View Cam !
Beats me on how that happened ! I wish I could repeat what I did on the old Pentium 4 !
« Last Edit: January 26, 2009, 03:31:29 PM by PICOdave69 »
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: D View Cam with DCS-910's and 920
« Reply #1 on: January 27, 2009, 09:31:53 AM »
Disabling any anti-virus software and see if it then works. In D-ViewCam2 goto the i icon above were the camera image should be and verify the IP address, viewing port of the camera if changed for remote access, and username/password.
Logged
Never forget that only dead fish swim with the stream

PICOdave69

  • Level 1 Member
  • *
  • Posts: 10
Re: D View Cam with DCS-910's and 920
« Reply #2 on: January 29, 2009, 07:17:55 AM »
It wasn't the AVG Free latest virus program, and the IP's were OK, guess it didn't like the auto add camera function the first time around
I removed all cameras, and re-added them manually with the same IP address, then plugged in the cameras
All works OK now
I also noted, that D View Cam has the Date / Time stamp on the video by default, I'm happy now ...

Thanks
Logged

PICOdave69

  • Level 1 Member
  • *
  • Posts: 10
Re: D View Cam with DCS-910's and 920
« Reply #3 on: February 01, 2009, 09:39:21 AM »
I give up !   D View Cam software 2.0.3 sometimes works, sometimes not, but it is mostly confused all the time, can't even get mutiple PC s to run the software the same way, and some PC s not at all

I'm going back to the IP View Lite SE software, at least is runs all the time, and config changes don't just disappear on you ...
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: D View Cam with DCS-910's and 920
« Reply #4 on: February 02, 2009, 09:30:51 AM »
What is the problem you are having?
Logged
Never forget that only dead fish swim with the stream

slyder

  • Level 2 Member
  • **
  • Posts: 34
Re: D View Cam with DCS-910's and 920
« Reply #5 on: February 09, 2009, 04:20:23 AM »
Same issue with 920 wired or wireless.. simply not seen.. works ok with IPView Lite.. instantly sees it and works, but this one keeps trying connect and giving me an event status message of videolost.

tried everything to fix it I could find here and elsewhere, but no go.

Vista 32B (Network is all dlink based hardware)

Access via explorer/firefox works fine..

Very difficult application to navigate through..
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: D View Cam with DCS-910's and 920
« Reply #6 on: February 09, 2009, 09:17:52 AM »
Make sure you manually enter all of the camera information properly. If you are running any anti-virus software please try disabling it and see if it now shows.
Logged
Never forget that only dead fish swim with the stream

slyder

  • Level 2 Member
  • **
  • Posts: 34
Re: D View Cam with DCS-910's and 920
« Reply #7 on: February 09, 2009, 02:15:10 PM »
OK.. Got it working.. .WOW what a headache..... Finally resolved it.. Had to setup all the info and configure first  THEN and only THEN plug in the camera!!.

Is there a manual for this app? and what does "videolost" status mean when your getting video??
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: D View Cam with DCS-910's and 920
« Reply #8 on: February 10, 2009, 09:35:41 AM »
Yes there is a manual on the D-Link support site right below were you download the App.

http://www.support.dlink.com/products/view.asp?productid=DCS-920
Logged
Never forget that only dead fish swim with the stream

nokiawiz

  • Level 1 Member
  • *
  • Posts: 24
  • Don't mess with me!
Re: D View Cam with DCS-910's and 920
« Reply #9 on: March 16, 2009, 11:18:32 PM »
I have nearly the same problem as PICOdave69. The cam works in the explorer mode with either Active X or Java but when I tried to use Dview, it says connecting even though it has detected the camera.

After 5 minutes of the 'connecting' screen, I gave up.

I'm using the software that came with the camera on the CD.

Also, I am running Norton 360 for my PC Security, Firewall, Email, Internet (Phishing & Fraudulent sites) as well as Backup and Maintenance.

Please advice. Thanks.
Logged
Mess with the best & Die like the rest!

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: D View Cam with DCS-910's and 920
« Reply #10 on: March 17, 2009, 04:36:58 PM »
Have you tried the latest version of D-ViewCam 2.03? It can be downloaded from the support website.

http://www.support.dlink.com/products/view.asp?productid=DCS-910
Logged
Never forget that only dead fish swim with the stream

nokiawiz

  • Level 1 Member
  • *
  • Posts: 24
  • Don't mess with me!
Re: D View Cam with DCS-910's and 920
« Reply #11 on: March 26, 2009, 12:16:53 AM »
both links given when clicked shows this URL...

http://www.support.dlink.com/chooseCountry.asp
Logged
Mess with the best & Die like the rest!

ceglivings

  • Level 1 Member
  • *
  • Posts: 2
Re: D View Cam with DCS-910's and 920
« Reply #12 on: April 17, 2009, 10:48:31 AM »
Any ideas about the 'event detected' videolost? I have that only on one of my cameras. Already rebooted cam and it's doing that on both PC's.
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: D View Cam with DCS-910's and 920
« Reply #13 on: April 20, 2009, 01:40:32 PM »
Are you using D-ViewCam version 2.03?
Logged
Never forget that only dead fish swim with the stream