D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: yveson33 on September 24, 2013, 02:13:52 PM
-
Hi,
i recently buyed d-link dns-320, after installed one drive, and
turn on, the bleu led still blinking and fan doesn't run. can you tell me what can i do to used my dns-320.
thx.
Sorry for my english.
-
First thing check that the drive is correctly seated in the unit.
Next, check that the network cable is connected and, when power is switched on the LED indicators on the lan port are lit.
Make sure the DNS-320 is connected to your network then use the Easy Search Utility and see if you can find it on the network.
If you can find it on your network follow the setup procedure and see if you can format the disk.
If one or more of the above fail you may have a defective unit which should be returned to your supplier for replacement.