D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-933L => Topic started by: JavaLawyer on May 01, 2013, 09:53:36 AM

Title: DCS-933L - Cumulative Firmware Release Notes
Post by: JavaLawyer on May 01, 2013, 09:53:36 AM

DCS-933L Cumulative Firmware Release Notes

Firmware: 1.07b01 - Date: 2/4/2015

[New Feature] New mydlink agent 2.0.18-b66
[Bug Fix] Fixed issue where device would not respond properly to portal commands under relay mode

Firmware: 1.06b06 - Date: 01/29/2015

Firmware: 1.05b05 - Date: 09/03/2014

[New Feature] Update mydlink agent to 2.0.18-b13.2
[New Feature] Meet new EU wireless regularization EN300 328 v1.8.1
[Bug Fix] Fixed the issue that NTP time synchronization is failed after camera reboot by power cord if the camera is connected to Internet by PPPoE mode.
[Bug Fix] Fixed the issue that the camera can not use special character at Extender Setup
[Bug Fix] On Device Web GUI, remove “www.DynDNS.org (Custom)” from the DDNS Server Address list and also change the address www.DynDNS.org (Free) to www.DynDNS.org
[Bug Fix] The Product name at the top left corner of Device Web GUI is changed to use the user-defined Camera Name which is configured on the Maintenance/Admin web page
[Bug Fix] Remove the hidden webpage for security concerns

Firmware: 1.04b01 - Date: 05/02/2014

Firmware: 1.03b08 - Date: 01/22/2014

[New Feature] When camera does not have feature, upgrade to a f/w with SSL certificate, it will automatically create a self signed cert (regenerated)
[New Feature] When camera upgrades with a f/w with cert. (f/w with SSL certificate automatically self signed), the SSL certificate wll automatically create a new self-signed cert (regenerate)
[New Feature] When camera is factory reset, the camera will automatically create a new self-signed SSL certificate
[New Feature] Update mydlink agent to v2.0.17-b55
[New Feature] Support Win8.1 + IE11
[New Feature] Support Java 7 update 51
[New Feature] Change the default FTP to passive mode
[New Feature] Have WPS LED lightened for 10 seconds when WPS setup is successful
[New Feature] Modify copyright from [2012-2013] to [2012-2014]
[New Feature] Change camera time to [2014-01-01] by default
[Bug Fix] Adjust sensor settings for video flash issue happened sometimes
[Bug Fix] Fix bad frame issue happened sometimes
[Bug Fix] Fix mydlink event timing issue of sound detection

Firmware: 1.02b5 - Date: 08/28/2013

[New Feature] Update mydlink agent to v2.0.17-b28.
[New Feature] Add user can configure interval setting for motion/sound detection of mail/ftp
[Bug Fix] Fixed schedule time of motion detection/sound detection incorrect issue when start time > end time
[Bug Fix] Fixed h.264 streaming issue tested on ios6
[Bug Fix] Fixed IP task will be restarted issue on DHCP renew time
[Bug Fix] Fixed OSD disappear issue.
[Bug Fix] NTP source port change to port 123

Firmware: 1.01b07 - Date: 05/24/2013

[New Feature] Update mydlink agent to v2.0.17-b06
[New Feature] Update h.264 Activex to v1.0.0.12
[New Feature] Only allow 0-9, a-z, A-Z, “.”, “-“, “_” as the user account name
[New Feature] Change max video clip to 3072K bytes
[Bug Fix] Fix the problem that mydlink Agent will run twice when the camera is connecting to DIR-850L using WPS Push button
[Bug Fix] Fixed the bug that the live streaming would stop when set H.264 bit rate is 3M and watch it via Chrome/Firefox
[Bug Fix] Fixed mydlink event not work issue when change IP address
[Bug Fix] Fixed system not stable issue when enable E-mail/FTP video clip
[Bug Fix] Fixed UPnP compatibity issue with DIR-826L router
[Bug Fix] Fixed E-mail/FTP cannot be started issue if motion/sound detection is enabled first

Firmware: 1.00b13 - Date: 01/22/2013