The Graveyard - Products No Longer Supported > DAP-1360

DAP 1360 UNABLE TO UPGRADE

(1/3) > >>

zenos:
Hi , I have problem with my DAP-1360 H/W Ver:F1 , F/W Ver: 6.07
H'is Ip 192.168.0.50 ,I WANT UPGRADE TO 6.11 but there is a error message " unable to complete upgrading" please any help

FurryNutz:
Link>Welcome!


* What Hardware version is your DAP? Look at the sticker under the DAP.
* Link>What Firmware version is currently loaded? Found on the DAPs web page under status.
* What region are you located?
IS the DAP connected to a main host router? What is the mfr and model# of the main host router?
Is your PC wire connected to the main host router along with the DAP?

Follow this process and see it will help:

* Was a Factory Reset performed before and after any firmware updates then set up from scratch?  Link> >FW Update Process

use IE11 or FF browser to send the FW file.

yahia31:
I have the same problem, I have a DAP-1360 H / W Ver: F1, F / W Ver: 6.07 I want to update it to the Worm: 6.11 but I have the same message "unable to complete upgrading ".
I have a cable connection
i tried with crome and firefox 56.0
i am in Algeria
I tried the reset after each attempt, I turned off the dap always the same message
please help me
thank you

FurryNutz:
Is there a 6.08 or 6.09 version file available? Might try upgrading to next increment available.

foxfaisal82:
Have you solved the problem?

Recently I also bought 2 units of the DAP-1360 (Revision F1), with firmware version 6.07. At first, I also wanted to upgrade the firmware to version 6.11 which is available from D-Link UK website (and also other D-Link Europe website). However my upgrade also failed and I received the "unable to complete upgrading " message.

At the same time, I also tried to upgrade the firmware to version 6.08, which is available from D-Link UK website (and also other D-Link Europe website). However, this upgrade cannot be proceeded because the zipped file for the firmware version 6.08 doesn't contain the image file used that should be used for the firmware upgrade.

I did some try and error upgrading/downgrading the firmware to other versions available from D-Link website from other countries (Americas, Asia Pacific, Middle East & Africa) and succeeded. Because of this, I conclude that there might be something wrong with the firmware version 6.11 downloaded from  D-Link UK website (and also other D-Link Europe website). Below is the summary of what I successfully did:
1) Successfully tried and error downgrading the firmware from version 6.07 to 6.05 downloaded from Malaysian website.
2) Successfully tried and error upgrading the firmware from version 6.05 to 6.08 downloaded from Australian website.
3) Successfully tried and error upgrading the firmware from version 6.08 to 6.10 downloaded from Argentinian website (and other South American countries' website).

Because of this, I conclude that the file for the firmware version 6.11 might have a problem. I will send an email to D-Link UK to complain about this matter and inform all of you once I get the feedback from them. Meanwhile, you may temporarily upgrade the firmware to version 6.10 (the latest AND working firmware so far) from Argentinian website (and other South American countries' website) while waiting for the feedback from D-Link UK.

PS:
I need a help from the administrators and moderators regarding my following problems:
1) I found this thread through google because I also have this problem.
2) Once I successfully upgraded the firmware to version 6.10 from Argentinian website by try and error, I decided to share my findings here so that at least all of you can also upgrade the firmware to version 6.10 (while I at the same time send an email to D Link UK to complain about the suspected problematic firmware version 6.11).
3) To share my findings with all of you in here, I have to create a forum account. When I want to create my account for this forum however, I got a message saying "Sorry Guest, you are banned from using this forum! Posting Inappropriate Content/ Links. This ban is not set to expire."
4) As far as I remember, this is my first time joining this forum and I never do anything wrong in here. If it is because of technical error, I hope the admin can do something to fix the problem. If I really ever did something wrong in this forum, please give me the evidence.
5) I got  the message "Sorry Guest, you are banned from using this forum! Posting Inappropriate Content/ Links. This ban is not set to expire." while tying to register using my yahoo email. When I changed using my gmail email, the registration became successful. However, I am banned again after changing my email address in my registered profile from gmail to yahoo. I changed it because my yahoo mail is my primary email address.
6) I tried to used my gmail email address again to register for the same time. I registered with the same username, but this time a message appear saying that the username that I have chosen has already taken.
7) In the end, I have to register using different username BUT using the same gmail email address.
8) To administrator in here, please fix this problem. As far as I remember, this is the first time I join this forum and I never do anything wrong. If this is caused by technical error, please fix it. If I have ever done anything wrong in here, please provide evidence.
9) If possible, I would like to use the first username that I've chosen and update my profile with my yahoo email again. Thank you.

Navigation

[0] Message Index

[#] Next page