• December 15, 2017, 05:28:38 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Problem on dcs 2310l  (Read 2237 times)

Idefix77

  • Level 1 Member
  • *
  • Posts: 3
Problem on dcs 2310l
« on: August 03, 2015, 02:32:53 AM »

Hello

I have buying an used dcs 2310l.
I have connected it on my network and it works well. (IP is good and the led is not flashing and green)
But i have not the admin password.
I try a hard reset (many times) and now i cannot connect to the camera : the led is flashing red and green.

Do you have any idea ?

Ps: sorry for my poor english.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Problem on dcs 2310l
« Reply #1 on: August 03, 2015, 07:42:39 AM »

Have the camera LAN wired to the main host router with a wired LAN PC and then run the setup wizard for the camera from your regional mydlink web site?

What region are you located?
Check the main host routers DHCP IP address table to see if the camera is getting an IP address.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Idefix77

  • Level 1 Member
  • *
  • Posts: 3
Re: Problem on dcs 2310l
« Reply #2 on: August 03, 2015, 10:04:47 AM »

I am in France.
I check my router and i cannot find the camera.
Before the hard reset i find it but not now.
Why the led is flashing red and green ?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Problem on dcs 2310l
« Reply #3 on: August 03, 2015, 10:44:53 AM »

Review the user manual for LED status information.

If the camera isn't being listed on your routers DHCP address table then there is a LAN cable issue so try swapping out cables or there is a problem with the camera...
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

Idefix77

  • Level 1 Member
  • *
  • Posts: 3
Re: Problem on dcs 2310l
« Reply #4 on: August 03, 2015, 10:57:26 AM »

Do you know the default IP adress for this camera ?
Normally i think the configuration is DHCP, but mauve the hard reset fix an static IP adress ?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 43913
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: Problem on dcs 2310l
« Reply #5 on: August 03, 2015, 11:02:02 AM »

it maybe .50 however if it's connected to the main host router, it may change to something different. It should appear there. Yes, once you can get it set up and recognized by the main host router, I believe you can set a static IP address using the IP address he gets from the main host router. I have the 933L and it's set for 192.168.0.93. Outside the DHCP IP address pool which is 192.168.0.100 to .199 on my router.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting