• May 18, 2024, 06:22:32 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Just a question about virtual server configuration  (Read 2965 times)

alex_82

  • Level 1 Member
  • *
  • Posts: 1
Just a question about virtual server configuration
« on: July 14, 2014, 07:14:04 AM »

Hi to all.

Just a question about virtual server configuration.
Is it possible to configure 2 or more IP address with the same internal port and different public port ?

I mean something like that:

public port 5551, IP address 156.125.0.25, internal port 25
public port 5552, IP address 156.125.0.26, internal port 25

the dwr 921 said that the internal port is duplicated, but i think that the control should be necessary only for public port and IP address ! not for internal port on a different server (different IP address).

i need that to work with six IP cameras with different IP address and the same rtsp PORT (example 554)

someone can help me ?
maybe possible that the firmware must be updated in order to solve this issue ?
thanks to all and regards !
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Just a question about virtual server configuration
« Reply #1 on: July 14, 2014, 08:08:19 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under router.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

I presume that you may need to use different ports as you can't use duplicate ports for different devices.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Just a question about virtual server configuration
« Reply #2 on: August 29, 2014, 12:38:45 PM »

Any status on this?  ???

Hi to all.

Just a question about virtual server configuration.
Is it possible to configure 2 or more IP address with the same internal port and different public port ?

I mean something like that:

public port 5551, IP address 156.125.0.25, internal port 25
public port 5552, IP address 156.125.0.26, internal port 25

the dwr 921 said that the internal port is duplicated, but i think that the control should be necessary only for public port and IP address ! not for internal port on a different server (different IP address).

i need that to work with six IP cameras with different IP address and the same rtsp PORT (example 554)

someone can help me ?
maybe possible that the firmware must be updated in order to solve this issue ?
thanks to all and regards !

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.