D-Link Forums
D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: mr.gestapu on March 30, 2019, 06:26:28 AM
-
Hello,
Respected Members,
I am facing a problem due to not having any device (Laptop, desktop) which supports ethernet port and I want to use only wireless services, but after upadating the firmware of D-Link "DSL-2750U", I am unable to connect to wifi because of password.
In this case I tried my best to find out manual password of wireless service, but in vain.
So, I need your help and kind guidance to solve the problem as sudden as possible.
Model: D-Link DSL-2750U
Firmware:ADM_206_DSL_2750U_ME_NOF_R1994_20170317_58d0be5de7054
Have a good day
-
I would factory reset the modem and set it up from scratch. Input a new SSID name and PW and write this information down for safe keeping.
-
bundle of thanks for reply,
the problem is that after updating firmware, i tried to reset it, but now i am unable to enter into the router settings because of diconnection between mobile phone and router.
-
Reconfigure the modem with a wired pc or laptop.
-
Dear Sir,
That's the problem, My laptop does not support it as I mentioned it in my first post, is there any possibilty to get manual password of DSL-2750U for wifi?
-
Do you still have the wifi SSID and PW card that came in the modem box?
If not, find someone with a wired PC or laptop that you can take the modem too, you don't have to fully setup the modem. Just connect with a PC long enough to log into the modems web page and configure the new SSID and PW. Save settings and apply. Once this is done, you can take back to your place and re-connect it up. Then you'll have access with your wireless devices.
To get Ethernet support on a PC or Laptop that doesn't not have built in Ethernet, please check out USB to Ethernet adapters. This can be an add-on for PCs with out Ethernet. There inexpensive too.
-
Thanks a lot,
The problem is solved after connecting the modem with a wired laptop.
have a good day.
-
Enjoy. ;)