D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-5020L => Topic started by: FurryNutz on December 20, 2016, 02:22:00 PM
-
DCS-5020L v1.14 B09 Published Date: 12/20/2016
Release Notes:
1. Fixed an issue that Time zone setting for Minsk should be GMT+3.
2. Fixed an issue that /config/ptz_move.cgi doesn’t move the camera view in the correct direction when the camera is installed upside down and Flip/Mirror are
both enabled.
3. Fixed the “RSA-CRT key leaks” vulnerability.
4. Fixed the “LANDAP stack overflow“ vulnerability.
5. Remove the “Arbitrary file upload interface” vulnerability.
6. Fixed vulnerability - Authenticated Arbitrary File Upload with Root Privileges.
7. Fixed vulnerability - Authenticated Root OS Command Injection in File Upload.
8. Fixed an XSS vulnerability - Stored XSS in User Name.
9. Fixed an XSS vulnerability - Reflected XSS in HTTP Host Header.
New Features:
1. Upgrade mydlink agent to 2.1.0-b43.
2. Change the HTTPs self-signed certificate to SHA2 algorithms.
3. Support Mydlink UID mechanism.
4. Change the support page hyperlink of Firmware Upgrade web-UI to www.dlink.com.
5. Updated OpenSSL to v1.0.1t.
6. Updated mDNSResponder to 625.41.2.
7. Change the default system time to 2016-01-01
8. Update the years in the copyright statement for IP Camera’s web-UI to 2016.
9. Add authentication to CGI /config/stream_info.cgi.
10. Offer the password validation on console port. (Console’s Password is synchronized with the admin’s password)
Get it here:
DCS-5020L (http://support.dlink.com/productinfo.aspx?m=DCS-5020L)
Let us know how it works for you.
-
After installing this firmware I am experiencing weaker wireless connection.
Camera was connecting perfectly, and now it can connect only if it's near the access point.
Any ideas?
-
I installed it. Seems to work fine. Don't feel any improvement nor degradation.
-
What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
How many other wireless devices do you have connected to the main host router?
- Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
- Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner (http://forums.dlink.com/index.php?topic=48327.0) to find out. How many?
I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.20 DHCP (http://forums.dlink.com/index.php?topic=58017.0)
After installing this firmware I am experiencing weaker wireless connection.
Camera was connecting perfectly, and now it can connect only if it's near the access point.
Any ideas?
-
Thank you for the reply.
I now believe the reason for the bad connection is that the camera fell.
It is not connecting in places it used to connect and another cam (5009) is connecting fine.
I will take it to the lab, hopefully they will be able to fix it.
-
Let us know how it goes. Maybe damaged.
-
I have 2 of these
#1 5020L - firmware v1.14 latest. will disconnect after some 48 hours. then maybe offline by 1-2 days then reconnect again on itself.
#2 5020L - firmware v1.10 old and not plan to upgrade firmware. always up and stable
both of them are in equal distance with DLINK router DIR-885L and router daily reboot at 6:00am.
WISHLIST for 5020L: Add Scheduled Reboot option.
-
Can you down grade #1 camera to v1.10?
I have 2 of these
#1 5020L - firmware v1.14 latest. will disconnect after some 48 hours. then maybe offline by 1-2 days then reconnect again on itself.
#2 5020L - firmware v1.10 old and not plan to upgrade firmware. always up and stable
both of them are in equal distance with DLINK router DIR-885L and router daily reboot at 6:00am.
WISHLIST for 5020L: Add Scheduled Reboot option.
-
cannot downgrade as I am not on that place for several weeks :(
maybe need to buy another 24hr timer plug
Can you down grade #1 camera to v1.10?
-
Also is the cameras using a static or DHCP IP address?