What Hardware version is your router? Look at sticker under router.
Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
What region are you located?
Are you wired or wireless connected to the router?
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Router and Wired Configurations Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
Enable or Disable Use Unicasting (compatibility for some ISP DHCP Servers) and test under Setup/Internet/Manual. Disable may help with speed performance on higher speed ISP services.
Turn on DNS Relay (http://forums.dlink.com/index.php?topic=45143.0) under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench (http://forums.dlink.com/index.php?topic=53222.0) and input new DNS addresses under Setup/Internet/Manual.
Setup DHCP (http://forums.dlink.com/index.php?topic=58017.0) reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
Ensure devices are set to auto obtain an IP address.
If IPv6 (http://en.wikipedia.org/wiki/Ipv6) is an option on the router, select Local Connection Only under Setup/IPv6.
Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI (http://en.wikipedia.org/wiki/SPI) to test.
Enable uPnP (http://en.wikipedia.org/wiki/Upnp) and Multi-cast Streaming (http://en.wikipedia.org/wiki/Multicast) under Advanced/Networking. Disable uPnP for testing Port Forwarding rules. Enable IPv6 Multi-cast Streaming for routers that have a Media Server option. Disable IPv6 Multi-cast Streaming if IPv6 or Media Server is not being used.
Turn off WISH (http://forums.dlink.com/index.php?topic=40459.0), and WPS under Advanced.
WAN Port Speed set to Auto or specific speed? Some newer ISP modems support 1000Mb so manually setting to Gb speeds can be supported by the router. Advanced/Advanced Networking/WAN Port Speed
Set current Time Zone, Date and Time. Use an NTP Server (http://forums.dlink.com/index.php?topic=48695.0) feature. The DST setting is only needed in the NA region. Tools/Time.
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 11, 2014, 08:37:45 AM
What Hardware version is your router?2.00 NA What Firmware version is currently loaded?(http://i.imgur.com/0zMbvzS.png) 2.00NA What region are you located? Middle Atlantic States New Jersey Are you wired or wireless connected to the router?Wired
Internet Service Provider and Modem Configurations What ISP Service do you have? Cable or DSL? Cable Comcast What ISP Modem Mfr. and model # do you have? ARRIS Model: WBM760A P/N: TC00DED760
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 11, 2014, 08:50:06 AM
Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives. Ensure devices are set to auto obtain an IP address. Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable or Disable SPI to test. Enable uPnP and Multi-cast Streaming under Advanced/Networking. Disable uPnP for testing Port Forwarding rules.
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 11, 2014, 10:23:16 AM
Let me know if you have disabled uPnP after setting up your PF rules. What values are you using for PF rules? Post a picture of that section please.
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 12, 2014, 11:25:08 AM
Can You Teamview My Computer and do it i dont know how to do it
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: FurryNutz on August 12, 2014, 11:32:12 AM
Send me a PM with the ID and PW. Please be wired to the back of the router with a wired PC please.
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 12, 2014, 11:43:24 AM
okay i sent you the msg and i m in a weird Desktop Windows 7
Title: Re: DIR-601 Port-Forward Not working Please Help ME
Post by: BluRayDisc on August 12, 2014, 12:47:49 PM
Thank You so much furryznutz for giving a solution and how to active the port
Title: Re: DIR-601 Port-Forward Not working Please Help ME (RESOLVED)
Post by: FurryNutz on August 12, 2014, 01:00:28 PM