The Graveyard - Products No Longer Supported > DIR-635
ports 0 and 1 show closed but not stealth
rjm65:
Hello, I am new here and I hope I am posting this in the right area...
I own a dlink dir-632 8 port router, I was surprised when i tested it at gibson research shields up that both ports 0 and 1 were closed but not stealth giving me a fail in the test...
my firmware version at that time was the stock version 1.01 I upgraded it to 1.03 today but no changes at shields up, they still show closed but not stealth?
is there a setting in the router to stealth these ports and also is there a newer firmware then the one I installed today?
thank you :)
Product Page: DIR-632 Hardware Version: A1 Firmware Version: 1.03NA
FurryNutz:
Link>Welcome!
* What region are you located?
* Are you wired or wireless connected to the router?
* Has a Factory Reset been performed?
* Was a Factory Reset performed before and after any firmware updates then set up from scratch? Link> >FW Update Process
Internet Service Provider and Modem Configurations
* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have?
Ensure no apps or services are using the ports and if not, could be faults negatives as if the ports are closed, there just not being used.
Be aware that this model router is been discontinued and no longer has any more updates for it. v1.03 is the last version of FW.
rjm65:
--- Quote from: FurryNutz on November 02, 2015, 08:01:45 AM ---Link>Welcome!
* What region are you located?USA Pennsylvania
* Are you wired or wireless connected to the router?Wireless for all computers and tablets wired to 7 ports with misc devices...
* Has a Factory Reset been performed?
uhm if the firmware update did not do this then no a reset was not done...
* Was a Factory Reset performed before and after any firmware updates then set up from scratch? Link> >FW Update Process
my guess is no cause i didn't reset anything?
Internet Service Provider and Modem Configurations
* What ISP Service do you have? Cable or DSL?rcn cable
* What ISP Modem Mfr. and model # do you have?no clue, whatever they use at rcn, its an ugly thing but it works... Flipped it over it ays it is made by Arris...
Ensure no apps or services are using the ports and if not, could be faults negatives as if the ports are closed, there just not being used.
Be aware that this model router is been discontinued and no longer has any more updates for it. v1.03 is the last version of FW.
--- End quote ---
I will attempt a factory rest and get back to you with the results of it... thank you for responding so quick... :)
FurryNutz:
Be sure to test with all applications closed on the PC accept for the browser. Ensure any background running apps are closed as well.
Try other port testing sites as well.
rjm65:
--- Quote from: FurryNutz on November 02, 2015, 08:34:19 AM ---Be sure to test with all applications closed on the PC accept for the browser. Ensure any background running apps are closed as well.
Try other port testing sites as well.
--- End quote ---
Factory reset was done, still shows port 0 and 1 closed not stealth on shields up, what other sites should i try to check if this is a glitch on their site or actual router issue...
Also is this router safe to use???
Navigation
[0] Message Index
[#] Next page
Go to full version