• April 23, 2024, 06:00:42 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DGL-4500 and IP Phone  (Read 3451 times)

harveje

  • Level 1 Member
  • *
  • Posts: 3
DGL-4500 and IP Phone
« on: December 29, 2009, 05:18:32 PM »
I want to set the router to make my IP phone modem high priority. How can I do that? Thru the gamefuel tab? I know the ip address and port but don't know the other info. How can I find the remote numbers?

Thanks,
Logged

Corroded

  • Level 2 Member
  • **
  • Posts: 49
Re: DGL-4500 and IP Phone
« Reply #1 on: December 30, 2009, 12:56:46 AM »
yes that would be a qos setting...

remember, you ONLY get email and web surfing from WiFi, not text or phone calls.

I have ATT and a Samsung Jack which has wifi.  Works great for the emails and web access via browser.

ZERO for phone calls.

IF you have Skype on there as an app, that is a different story.
Logged

harveje

  • Level 1 Member
  • *
  • Posts: 3
Re: DGL-4500 and IP Phone
« Reply #2 on: December 30, 2009, 05:36:53 AM »
Thanks,
It is a wired ip modem from phonepower behind the router with an assigned ip address. I just want to make sure when it is in use it gets priority bandwidth. My wife is ?itching because when I'm d/l stuff and she is on the phone the service gets real bad and sometimes disconnects. I have cable internet with decent speed.
Can someone walk me thru setting this up in the gamefuel settings? It is on DMZ right now.

Thanks.

Logged

HankRiker

  • Level 2 Member
  • **
  • Posts: 83
Re: DGL-4500 and IP Phone
« Reply #3 on: December 30, 2009, 06:45:34 AM »
Quote from: harveje on December 29, 2009, 05:18:32 PM
I want to set the router to make my IP phone modem high priority. How can I do that? Thru the gamefuel tab? I know the ip address and port but don't know the other info. How can I find the remote numbers?

We are using a NetGear SPH200D Skype phone, and the only thing I did for it was give it a specific IP address, and it works great.

In my experience Gamefuel caused more issues than it solved, but I have read other folks who have the opposite opinion. Give it a try, see what your call quality is like in each situation. Also, check out http://www.pingtest.net/, as it will give you a good idea of your connection and its ability to handle VOIP.

Hope this helps,
Hank
Logged
My D-Link Hardware:
DIR-825 HW:B1 FW:2.02NA || DIR-825 HW:A1 FW:1.01 || DGS-1016D HW:C1 || DGL-4500 HW:A1 FW:1.02
DGL-4300 HW:A4 FW:1.9 || DGS-2205 || DGL-4300 HW:A2 FW:1.9 || DGL-4300 HW:A1 FW:1.9

harveje

  • Level 1 Member
  • *
  • Posts: 3
Re: DGL-4500 and IP Phone
« Reply #4 on: December 30, 2009, 12:53:03 PM »
Ping test cam back with a line quality "A". How would I find the Remote port and Remote Ip range to use in  the gamefuel settings?

Thanks again.



Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: DGL-4500 and IP Phone
« Reply #5 on: December 30, 2009, 01:24:23 PM »
Can try these, these are used for XBL however the range is all inclusive so I presume that this range will include any and or all ports to what your trying to connect to:

Remote IP Range: 0.0.0.0 - 255.255.255.255
Protocol / Ports   
TCP
0 / 65535
0 / 65535

Let us know if this works or not.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

djzoey

  • Level 1 Member
  • *
  • Posts: 9
Re: DGL-4500 and IP Phone
« Reply #6 on: December 30, 2009, 01:26:22 PM »
Those are what I use for XBL, they should work.
Logged