• October 04, 2024, 10:09:20 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DCS Network Cameras - Can I Add a Wide-Angle Lens to My Camera?  (Read 10138 times)

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic

In some instances, D-Link network camera owners may want to increase the network camera field of view (FOV) to a value greater than is physically possible with the camera.

Procedure

To increase the D-Link camera field of view, a third-party wide angle lens may be purchased and attached to the front face of the D-Link camera integrated lens. Detachable wide angle lenses are typically available in three different varieties:

  • Magnetic Lens - A magnetic lens typically consists of a thin metal ring with self-adhesive tape that sticks to the circumference around the camera integrated lens. The wide angle lens contains a magnet at its base that is attracted to the ring. Once the ring is attached to the front face of the camera, the wide angle lens can easily be attached/removed as needed via the on-board magnet. A magnetic lens is not recommended for cameras containing Night Mode functionality, as the magnetic may interfere with the IR cutover filter, a metal component in the D-Link camera whose physical movement may be impeded by a magnetic field.
  • Clip-on Lens - A clip-on wide angle lens, typically made for cell phones, physically clips onto the camera without the need for any adhesive tape or physical alteration of the camera. However, the wide form factor of the D-Link cameras may not be well suited for this type of lens. The workability of this solution will depend, in part, by the clip-on mechanism and shape of the D-Link camera.
  • Self Mod - Using a bit of ingenuity, a non-magnetic lens can be permanently attached to the face of the D-Link camera using adhesive or some other form of physical attachment.

Additional Resources

Disclaimer

The procedure described in this post is not sanctioned by D-Link, the thread poster, or content contributors for improving the performance or functionality of D-Link network cameras. Neither D-Link, the thread poster, nor content contributors warrant against damage to the camera on which this procedure is applied, property damage, or injury resulting from the application of this procedure. Individuals who choose to perform this procedure, do so at their own risk and will void the D-Link warranty for their DCS camera on which this procedure is performed.
« Last Edit: December 18, 2014, 03:55:03 PM by JavaLawyer »
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC