• April 26, 2024, 11:51:43 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Firmware Recommendation  (Read 4598 times)

zkhaial

  • Level 1 Member
  • *
  • Posts: 8
Firmware Recommendation
« on: September 20, 2008, 02:02:44 AM »
Which firmware is the most stable and has the least problems 1.04 or 1.05?

Z
Logged

ECF

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2692
Re: Firmware Recommendation
« Reply #1 on: September 30, 2008, 11:59:15 AM »
I would recommend going with 1.05.
Logged
Never forget that only dead fish swim with the stream

juhealy

  • Level 1 Member
  • *
  • Posts: 3
Re: Firmware Recommendation
« Reply #2 on: October 22, 2008, 03:54:54 PM »
I would not recommand 1.05. I switched to 1.05 and within a few days, I would get an email stating that both drives have failed. I would reset the entire 323, it would be fine for a few days and I would get the same error. I reverted back to 1.04 and everything was fine.

My drives are two Western Digital 500 Gb drives. Not sure if that has anything to do with it but those where the problems I had with 1.05.
Logged

dmatlick

  • Guest
Re: Firmware Recommendation
« Reply #3 on: October 22, 2008, 06:18:02 PM »
I am using 1.05 and have had no problems at all.
Logged

hilaireg

  • Level 3 Member
  • ***
  • Posts: 348
Re: Firmware Recommendation
« Reply #4 on: October 22, 2008, 06:51:00 PM »
I'm running three (3) DNS-323 with f/w 1.05; they're configured in RAID1 using D-Link tested Seagate 500GB HDD's ... rock solid. 
Logged