• March 28, 2024, 01:29:49 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations  (Read 24708 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting

D-Link posted DCS-933L Rev A firmware version,which can be downloaded from Mydlink.com: DCS-933L Rev A  - Firmware v1.14 B11 Download.
Scroll to the right and select the DCS-933L camera.
Or from USA site:
DCS-933L Rev A  - Firmware v1.14 B11 Download.

Problems Fixed
1. Fixed an issue where IP Camera might fail to establish a PPPoE connection if PPP Discovery phase fails.
2. Fixed an issue that Time zone setting for Minsk should be GMT+3.
3. Fixed the “RSA-CRT key leaks” vulnerability.
4. Fixed the “LANDAP stack overflow” vulnerability.
5. Remove the “Arbitrary file upload interface” vulnerability.
6. Fixed vulnerability - Authenticated Arbitrary File Upload with Root Privileges.
7. Fixed vulnerability - Authenticated Root OS Command Injection in File Upload.
8. Fixed an XSS vulnerability - Stored XSS in User Name.
9. Fixed an XSS vulnerability - Reflected XSS in HTTP Host Header.

New Features
1. Upgrade mydlink agent to 2.1.0-b43.
2. The default date and time settings are changed to 2017-01-01, 00:00:00.
3. Updated ActiveX control and Java applet with renewed code-signing certificate.
4. Change the HTTPs self-signed certificate to SHA2 algorithms.
5. Support Mydlink UID mechanism
6. Change the support page hyperlink of Firmware Upgrade web-UI to www.dlink.com.
7. Updated OpenSSL to v1.0.1t.
8. Updated mDNSResponder to 625.41.2.
9. Update the years in the copyright statement for IP Camera’s web-UI to 2016.
10. Add authentication to CGI /config/stream_info.cgi.
11. Offer the password validation on console port. (Console’s Password is synchronized with the admin’s password)

Please post your comments and observations as a reply to this thread.

 :)  ;)  :)
« Last Edit: March 09, 2017, 12:11:48 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

rjms

  • Level 1 Member
  • *
  • Posts: 13
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #1 on: February 28, 2017, 03:21:11 AM »

Update went well.

Still can't directly access individual pages of the web UI (still getting the "forbidden" message), but at least they didn't block the "referrer" trick when using curl.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #2 on: February 28, 2017, 06:16:51 AM »

I presume directly URL may not be supported any longer. Maybe a security issue they are concerned with.

Enjoy.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

cgmendla

  • Level 1 Member
  • *
  • Posts: 10
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #3 on: March 01, 2017, 07:52:48 PM »

Someone needs to update the support page at http://support.dlink.com/ProductInfo.aspx?m=DCS-933L  as the latest version there is 1.13.

Rather annoying to go through the process of downloading and installing assuming that someone was actually maintaining that page. If I wasn't on the forums, I'd have kept wasting time trying to upgrade and getting messages that I have to upgrade.

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #4 on: March 01, 2017, 08:34:42 PM »

Sometimes D-Link doesn't update the support.dlink.com site and the mydlink.com site is not kept in sync. Users are encouraged to check both sites or check here in the forums as I try to keep the forum users up to date as i check both sites as well.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #5 on: March 03, 2017, 09:33:09 AM »

Does this still work for viewing the video?
http://forums.dlink.com/index.php?topic=64200.0

Update went well.

Still can't directly access individual pages of the web UI (still getting the "forbidden" message), but at least they didn't block the "referrer" trick when using curl.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #6 on: March 09, 2017, 12:12:16 PM »

USA site updated:
http://forums.dlink.com/index.php?topic=66414.msg279445#msg279445

Someone needs to update the support page at http://support.dlink.com/ProductInfo.aspx?m=DCS-933L  as the latest version there is 1.13.

Rather annoying to go through the process of downloading and installing assuming that someone was actually maintaining that page. If I wasn't on the forums, I'd have kept wasting time trying to upgrade and getting messages that I have to upgrade.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

JJdaCool

  • Level 1 Member
  • *
  • Posts: 24
  • i
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #7 on: May 03, 2017, 11:47:54 PM »


To get the url page back try this. It worked for me, but it might not work for your camera. (I only had to enter the following one time)

First, connect to your camera ip address (ipaddr), LOG IN/ON using admin as user and your camera password (or leave blank if camera password not set).

(Replace (ipaddr) with your camera ip address.)
This should connect you to http://(ipaddr)/m  which is a non functional webpage.

Second, then  type into the web address bar http://admin:root@(ipaddr)   without the /m  .
You may need to enter user name admin and camera password again

Example:  http://10.0.0.65
Username : admin    (example)Password : 12345678
http://10.0.0.65/m
http:admin:root@10.0.0.65
Username : admin    (example)Password : 12345678 
 http://10.0.0.65/



Logged
Yo!

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #8 on: May 04, 2017, 11:30:50 AM »

Thanks for this information. Hope it helps future users.


To get the url page back try this. It worked for me, but it might not work for your camera. (I only had to enter the following one time)

First, connect to your camera ip address (ipaddr), LOG IN/ON using admin as user and your camera password (or leave blank if camera password not set).

(Replace (ipaddr) with your camera ip address.)
This should connect you to http://(ipaddr)/m  which is a non functional webpage.

Second, then  type into the web address bar http://admin:root@(ipaddr)   without the /m  .
You may need to enter user name admin and camera password again

Example:  http://10.0.0.65
Username : admin    (example)Password : 12345678
http://10.0.0.65/m
http:admin:root@10.0.0.65
Username : admin    (example)Password : 12345678 
 http://10.0.0.65/



Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

HWAM

  • Level 2 Member
  • **
  • Posts: 82
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #9 on: December 03, 2017, 11:40:19 PM »

http://forums.dlink.com/index.php?topic=61526.45
Bug:
The reason of this issue is because the Netgear R7000 / AC1900’s return code for the FTP "create folder" command is different from other FTP servers. A new process to handle the new return code had to be added in firmware v1.10.B03 to make this work. A simple compatibility issue between the server and client used in these units.  No ETA yet on the new firmware release date for US region, but the process has started.

I just found out this bug was only fixed in version v1.10.B03. And not in all newer versions for the 933L. I never updated to newer versions. All my cams still run on v1.10.B03. I bought a new 933L and it was not working again so I had to downgrade to v1.10.B03.

Why is this bug never fixed in newer versions??

Please fix this, it's a solved known bug. Only v1.10.B03 has it fixed!!!

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #11 on: December 06, 2018, 01:31:06 PM »

Nope
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #12 on: December 06, 2018, 01:35:02 PM »

 >:(
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #13 on: December 06, 2018, 01:37:13 PM »

The "revoked certificate" issue is getting fixed for that camera. I was just told Q1 of 2019 so I am going to assume  ::) that KRACK will be fixed also.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-933L Rev A - Firmware v1.14 B11 Comments & Observations
« Reply #14 on: December 06, 2018, 01:44:37 PM »

Ok, thanks for the additional info. Will wait for next year.  ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: [1] 2