D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => WBR-2310 => Topic started by: Chas1251 on February 04, 2009, 04:59:12 PM
-
I have just hooked up my wireless router, Specifically a WBR-2310, and need to secure the router. I have been trying to access the Web Site to change user name and password. When I enter the IP# as suggested I get sent to the "ASK.com" web site which refers me back to D-Link Support. Do I have the default correct? My computer in the config for IPA shows the IPA as 192.168.10.254 which sent me to linksys.com and not the D-Link Admin Site. When I tried it again I was rerouted again to the "Ask.com" again.
How do I get out of this and get my router working right?
Help!!!!!!!!
-
What exactly are you typing into the address bar of your web browser?
-
you should use http://192.168.0.1/
if you are using windows
Go to start menu/execute and type "cmd" a new black window will appear type "ipconfig"
you should see information about your connection beside default gateway if you see 192.168.0.1 the url stated above should work. If you don't see that you are NOT connected to your router...
-- You obviously connected to the internet.. try unplug the modem from your computer and plug the modem to the router... If you have some more wire plug your router to your computer and retry ipconfig... you should be OK then...
If this does not `t help.. try to put more information in your post..
-- OS version ( mac, XP, VISTA ... )
-- what did you try ?
-- Is your computer configured to use a static IP or DHCP
-- the printout of ipconfig
Hope this is enough :)
-
Maybe you are connected on a different network specifically a network from a linksys router. Try hardwiring your computer to your router first to access the admin page and to check the settings of your wireless
-
Also try hard resetting your router and ensure you have the latest firmware.