D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2132L => Topic started by: Popovice on September 18, 2015, 10:01:18 AM
-
That is really what happened. The latest FW version for RevA is 1.06.01 and all of my three DCS-2132L cameras have now been updated to this version even though I'm absolutely sure that I have never pressed the "Update Now" button at the web interface or at the smartphone application. The good thing is that all the cameras are still up and running. It is so very stupid that D-Link even offers this update option for the remote cameras, because according to their specific instructions the FW update via a wireless connection is strictly forbidden.
What comes to the 1.06.01 FW version itself it seems that the image quality has again gone worse, i.e. the image is very grainy and the blockiness can be very easily seen even though the settings and data connection are exactly the same as before. Does anybody have an idea how to disable the FW updates and notifications permanently? I personally do not have any need to update the FW ever as long as the cameras are working reliably.
-
I'll check mine
Ok i remembered my password and got in.
1.00 in top right
Fw version 1.00.06 on status page.
Haven't clicked on it in a while through the app.
Doesn't work on anything past 2.5.1 app (which i still use).has best frame rate on my tablets. (13 to 15fps)
-
I have 1 2132l.never liked the video quality. I love the 2230 much more. I have 5 of those.
-
1.00 in top right
Fw version 1.00.06 on status page.
You seem to have a VERY old firmware version. As said, the latest for RevA camera is 1.06.01 and during the 2.5 years I have played with these cameras there has been at least 1.00.06, 1.01.09, 1.01.10, 1.02.00, 1.03.09, 1.04.02 and 1.05.02 versions officially available.
-
Looks like that 1.07.02 FW is available for RevA, at least mydlink web-interface suggest to update.
I still have version 1.05.02. Anyone know the place where I can find release notes for these new (1.06.01, 1.07.02, etc) FWs ?
I try to find fixed errors list before updating my camera.
From the d-link support page I can find 1.05.02 only.
AHess
-
For some reason posting of the release notes doesn't come at the same time. I presume they will post notes soon though. Keep an eye on it.
Looks like that 1.07.02 FW is available for RevA, at least mydlink web-interface suggest to update.
I still have version 1.05.02. Anyone know the place where I can find release notes for these new (1.06.01, 1.07.02, etc) FWs ?
I try to find fixed errors list before updating my camera.
From the d-link support page I can find 1.05.02 only.
AHess
-
I found v1.07.01 release note. Some info below about latest releases:
V1.06.01
Fixed errors:
- Fixed the Cross-Site Scripting(XSS) issue
- Fixed the security issue of tunneling RTSP streaming over HTTP
- Fixed the Network Time Protocol daemon(ntpd) vulnerabilities issue
New features:
- Updated mydlink agent to 2.0.19-b60
- Add the login check mechanism on Web GUI to solve Brute Force Attack issue
_______________________________________________________
V1.07.01
Fixed errors:
- N/A
New features:
- Updated mydlink agent to 2.0.19-b60n
- Updated digital signature
Still known issue:
- Spec change: G.726 audio codec wouldn’t be supported in FW v1.03 or later
AHess
For some reason posting of the release notes doesn't come at the same time. I presume they will post notes soon though. Keep an eye on it.
Looks like that 1.07.02 FW is available for RevA, at least mydlink web-interface suggest to update.
I still have version 1.05.02. Anyone know the place where I can find release notes for these new (1.06.01, 1.07.02, etc) FWs ?
I try to find fixed errors list before updating my camera.
From the d-link support page I can find 1.05.02 only.
AHess
-
Thanks for posting info about v1.07.
-
Thanks for posting info about v1.07.
My experience about 1.07.01 FW is not so good.
Just before I leave my place I upgraded that and with my lucky camera not send email when motion detection triggers. Damn.
And now Iam remote, not sure when I could test that locally.
When I test that (Event setup --> Server --> Test), it gave error. And before you say anything I didn't change any settings
before and after FW update. Well done D-link.
AHess
-
Try a factory reset and set up from scratch to see of the problem continues?
Thanks for posting info about v1.07.
My experience about 1.07.01 FW is not so good.
Just before I leave my place I upgraded that and with my lucky camera not send email when motion detection triggers. Damn.
And now Iam remote, not sure when I could test that locally.
When I test that (Event setup --> Server --> Test), it gave error. And before you say anything I didn't change any settings
before and after FW update. Well done D-link.
AHess
-
I think this is same problem than with revB:
http://forums.dlink.com/index.php?topic=63439.0
Again I have to say that D-link testing process is totally ****. I can't even remember how many times this happened, same code changes to every model
and after that they think that if the change working in one specific model, it's not necessary to test every product.
Here is only newest (1.07) fw:
https://www.mydlink.com/download#DCS-2132L
Do you know where I can find v1.05.02 ?
EDIT:
and here http://support.dlink.com/ProductInfo.aspx?m=DCS-2132L newest fw is 1.04
AHess
Try a factory reset and set up from scratch to see of the problem continues?
Thanks for posting info about v1.07.
My experience about 1.07.01 FW is not so good.
Just before I leave my place I upgraded that and with my lucky camera not send email when motion detection triggers. Damn.
And now Iam remote, not sure when I could test that locally.
When I test that (Event setup --> Server --> Test), it gave error. And before you say anything I didn't change any settings
before and after FW update. Well done D-link.
AHess
-
I recommend if your camera works while on a certain version of FW, don't udpate. You don't have too. "If it works, don't fix it."
Try this:
http://tsd.dlink.com.tw/downloads2008detailgo.asp (http://tsd.dlink.com.tw/downloads2008detailgo.asp)
-
Try this:
http://tsd.dlink.com.tw/downloads2008detailgo.asp (http://tsd.dlink.com.tw/downloads2008detailgo.asp)
Thanks a lot. E-mail alarms works again.
I recommend if your camera works while on a certain version of FW, don't udpate. You don't have too. "If it works, don't fix it."
True, if we talking about d-link devices.
Normally Iam so optimistic, that if I get update for some device, I really think that I get improvement to some functionality or whole new feature.
AHess
-
Glad it's working again. Enjoy. ;)